View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | 1J36 soft magnetic alloy strip ,1J36 alloy for harsh environments ,precision 1J36 control system alloy | ||
Engineered specifically for demanding industrial control instrumentation, aviation sensors, and harsh environment electromagnetic systems, our 1J36 Soft Magnetic Alloy Strip delivers ultra-stable magnetic permeability, optimized Curie temperature control, and exceptional dimensional stability under severe thermal and mechanical stresses.
![]()
1J36 is a specialized binary nickel-iron soft magnetic alloy containing approximately 36% nickel, engineered to provide high initial permeability, low coercive force, and precise thermal-magnetic stability across wide temperature fluctuations.
Manufactured through vacuum induction melting (VIM) followed by electroslag remelting (ESR) and multi-pass cold rolling, DLX 1J36 strip ensures ultra-low gas content, zero surface micro-cracks, and homogeneous grain orientation. It is the premier core material for electromagnetic actuators, flowmeter sensors, magnetic shielding cans, and harsh-environment telemetry switches requiring minimal hysteresis losses and zero drift.
![]()
| Element | Ni | C | Si | Mn | P | S | Fe |
|---|---|---|---|---|---|---|---|
| Min (%) | 35.0 | — | — | 0.30 | — | — | Balance |
| Max (%) | 37.0 | 0.03 | 0.30 | 0.60 | 0.020 | 0.020 | Balance |
| Technical Metric | Typical Value | Engineering Significance |
|---|---|---|
| Density | 8.12 g/cm3 | Structural weight optimization |
| Curie Temperature (Tc) | 230 - 250 °C | Defines thermal stability ceiling |
| Electrical Resistivity | 0.75 - 0.85 μΩ⋅m | Suppresses high-frequency eddy current losses |
| Tensile Strength (Rm) | 450 - 550 MPa | Annealed state formability & deep drawing |
| Yield Strength (Rp0.2) | ≥240 MPa | Resistance to mechanical deformation |
| Elongation (A50) | ≥30% | Superior stamping & bending capability |
| Hardness | 130 - 160 HV | Optimized for precision stamping dies |
![]()
![]()
![]()
![]()
![]()
To achieve optimal magnetic permeability and relieve internal stresses induced by stamping or bending, 1J36 components should undergo protective atmosphere heat treatment. We recommend dry hydrogen or high-vacuum annealing at 1100°C−1150°C for 2−3 hours, followed by controlled furnace cooling down to 200°C.
While 1J50 (approx. 50% Ni) offers higher maximum permeability and saturation magnetic induction (Bs), 1J36 exhibits unique thermal expansion compatibility and stable magnetic response in specific temperature compensation and harsh environment control loops where 50% Ni alloys might suffer from higher thermal drift.
We offer flexible B2B minimum order quantities based on strip gauge and custom slitting requirements. Coils are securely packed with anti-corrosion VCI paper, desiccant pouches, protective plastic film, and heavy-duty ISPM-15 compliant export wooden crates to ensure zero rust during oceanic transit.
Yes. Our precision slitting lines can slit strip down to 5.0 mm width with slit width tolerances within ±0.05 mm, accompanied by deburred, rounded, or slit edges optimized to extend tool life in automated stamping presses.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!