View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | Manganin Alloy Strip 6J8 ,Precision Shunt Resistor Alloy ,0.01-1.0mm Manganin Strip | ||
Ultra-thin 6J8 precision resistance alloy strip (CuMn12Ni2 class) engineered for high-accuracy instrumentation. Manufactured under vacuum induction melting and tight cold-rolling controls to ensure near-zero temperature coefficient of resistance (TCR), exceptional long-term electrical stability, and minimal thermal EMF against copper. Available in thicknesses from 0.01mm to 1.0mm and widths from 2.0mm to 300mm.
![]()
6J8 is a specialized copper-manganese-nickel resistance alloy tailored specifically for ultra-precision electrical measurement. Unlike standard heating alloys, 6J8 offers maximum resistance stability around ambient operating temperatures (15∘C to 35∘C). Through precise multi-stage continuous bright annealing and tension leveling, our strip material eliminates residual internal stress, guaranteeing zero resistance drift during post-stamping, electron-beam welding, and laser cutting processes in shunt manufacturing.
The chemical composition and physical metrics are manufactured to strict internal quality management protocols with full mill test certificates:
| Parameter / Property | Specified Value / Range |
|---|---|
| Alloy Grade | 6J8 (F1 Manganin Class) |
| Nominal Chemical Composition | Mn: 11.0%–13.0%, Ni: 1.5%–2.5%, Balance Cu |
| Thickness Range | 0.01 mm – 1.0 mm (Custom tolerances available down to ±0.002 mm) |
| Width Range | 2.0 mm – 300 mm |
| Supply Form | Continuous precision strip, ribbon, foil coil, or cut-to-length sheets |
| Electrical Resistivity (ρ at 20∘C) | 0.43±0.03 μΩ⋅m |
| Temperature Coefficient of Resistance (α, 0–50∘C) | ≤±10×10−6/∘CC (10 ppm/∘C) |
| Thermal EMF vs. Copper (0–100∘C) | ≤1.0 μV/∘C |
| Density | 8.45 g/cm3 |
| Tensile Strength (Annealed / M Condition) | ≥380 MPa |
| Elongation (A50) | ≥15% |
![]()
![]()
![]()
![]()
A: 6J8 is engineered specifically for ultra-precision instrumentation, offering a flatter TCR parabolic curve near room temperature and lower thermal EMF compared to 6J12/6J13, which are typically used for standard commercial resistors and sliding rheostats.
A: To relieve mechanical stamping stress and restore optimal TCR performance, components should undergo stabilizing heat treatment in a vacuum or protective inert atmosphere (typically 250∘C–350∘CC for 1 to 2 hours), followed by controlled slow cooling.
A: With multi-roll high-precision rolling mills and real-time laser thickness monitoring, we achieve thickness tolerances as tight as ±0.002 mm with uniform cross-sectional profile.
A: Yes, we provide precision-slit coils on plastic/metal spools with anti-corrosion barrier packaging, moisture desiccant, and edge protection to prevent distortion during transit.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!