View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | 6J40 Cu55Ni45 alloy strip ,copper nickel resistor strip ,precision resistor alloy strip | ||
Engineered for precision current sensing, high-stability shunts, and instrumentation resistors, our 6J40 (Cu55Ni45 Constantan) precision resistance alloy strip provides near-zero temperature coefficient of resistance (TCR), high electrical resistivity, and stable thermal EMF performance against copper.
![]()
Our 6J40 Cu55Ni45 alloy strip is produced via vacuum induction melting (VIM), continuous precision cold rolling, and protective atmosphere bright annealing. This refined manufacturing route eliminates harmful non-metallic inclusions and ensures homogeneous grain boundaries, providing electronic component designers with unmatched batch-to-batch repeatability.
By maintaining strict control over minor alloying elements (such as Mn, Fe, and Si), our 6J40 strip exhibits a flat resistance-temperature characteristic between -40°C and +100°C, virtually eliminating thermal measurement drift in critical battery management and power metering circuits.
![]()
| Element | Nickel (Ni) | Manganese (Mn) | Iron (Fe) | Carbon (C) | Silicon (Si) | Copper (Cu) |
|---|---|---|---|---|---|---|
| Standard % | 40.0 – 44.0 | 1.0 – 2.0 | ≤ 0.50 | ≤ 0.05 | ≤ 0.15 | Balance (Cu ~55%) |
| Property Parameter | Typical Engineering Value | Unit |
|---|---|---|
| Electrical Resistivity at 20°C | 0.49 ± 0.03 | μΩ·m |
| Temperature Coefficient of Resistance (TCR, 20~100°C) | -40 to +40 (Ultra-precision grade: ±15) | × 10⁻⁶ / °C (ppm/°C) |
| Thermal EMF vs. Copper (0~100°C) | ~ +45 | μV/°C |
| Density | 8.90 | g/cm³ |
| Melting Point | 1220 – 1280 | °C |
| Thermal Conductivity (20°C) | 21.5 | W/(m·K) |
| Tensile Strength (Soft Annealed / M-State) | 420 – 540 | MPa |
| Elongation at Break (Annealed) | ≥ 25 | % |
| Hardness (Annealed Condition) | 90 – 130 | HV |
| Dimension Form | Thickness Range | Width Range | Thickness Tolerance | Width Tolerance |
|---|---|---|---|---|
| Precision Strip / Ribbon | 0.02 mm – 3.0 mm | 2.0 mm – 350 mm | ± 0.003 mm | ± 0.05 mm |
| Foil / Ultra-thin Strip | 0.01 mm – 0.05 mm | 5.0 mm – 150 mm | ± 0.002 mm | ± 0.03 mm |
| Supply Delivery States | Soft Annealed (M), Half-Hard (Y2), Full-Hard (Y) | Custom burr-free slitting & edge leveling |
![]()
![]()
![]()
![]()
Q1: What is the core electrical difference between 6J40 Cu55Ni45 and Manganin (6J12 / 6J13)?
A1: 6J40 (Constantan) provides higher nominal resistivity (0.49 μΩ·m vs. 0.43 μΩ·m) and a broader temperature stability range with superior oxidation resistance. While 6J40 generates a higher thermal EMF against copper (~45 μV/°C), it is widely preferred for AC current shunts, SMD current sensors, and general precision power resistors.
Q2: What dimensional tolerances can be guaranteed on cold-rolled 6J40 strips?
A2: We achieve thickness tolerances as tight as ±0.003 mm and width tolerances within ±0.05 mm on precision slitted coils. This tight dimensional control ensures linear resistance deviation remains within ±1.5% across entire production batches.
Q3: Which delivery tempers and surface conditions are available for 6J40?
A3: We supply 6J40 in bright soft annealed (M), quarter-hard, half-hard (Y2), and full-hard (Y) conditions. All strips feature a clean, bright, oil-free surface suitable for direct stamping, deep drawing, and continuous reel-to-reel bonding.
Q4: What are the standard packaging and minimum order quantity (MOQ) terms?
A4: Products are delivered on precision plastic spools, heavy-duty cardboard cores, or self-supporting coils wrapped in VCI anti-corrosion barrier packaging and sealed inside export wooden cases. MOQ is dynamically tailored according to required thickness, width, and slitting parameters.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!