View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | 1J36 soft magnetic alloy wire ,corrosion resistant 1J36 wire ,1J36 wire for solenoid valves | ||
1J36 soft magnetic alloy wire is a high-grade 36% nickel-iron (Ni-Fe) precision magnetic alloy optimized for high-performance electromagnetic components. Compared to standard silicon steel and pure electrical iron, 1J36 exhibits an ideal balance of soft magnetic properties and atmospheric corrosion resistance, preventing rust-induced plunger sticking and magnetic performance decay in industrial solenoid valves.
Manufactured via High-Purity Vacuum Induction Melting (VIM) followed by Electroslag Remelting (ESR), our 1J36 wire achieves ultralow non-metallic inclusion levels and uniform grain distribution. This clean metallurgical foundation ensures stable B-H loop characteristics, low coercivity (Hc), and fast dynamic electromagnetic switching response over long service cycles.
![]()
Our metallurgical process maintains ultra-narrow compositional windows to ensure uniform electromagnetic performance batch-to-batch:
| Element | Ni | C | Mn | Si | P | S | Fe |
|---|---|---|---|---|---|---|---|
| Standard Range (%) | 35.0 – 37.0 | ≤0.030 | 0.20 – 0.60 | 0.15 – 0.30 | ≤0.020 | ≤0.020 | Balance |
| Typical Heat Analysis | 36.1 | 0.015 | 0.38 | 0.22 | 0.008 | 0.005 | Bal. |
| Technical Parameter | Metric Value | Engineering Significance |
|---|---|---|
| Density | 8.12 g/cm3 | Precision component mass calculation |
| Curie Temperature (Tc) | ≈230∘C | Thermally stable magnetic operational limit |
| Electrical Resistivity (ρ) | ≈0.75 μΩ⋅m | Low eddy current loss in AC/pulsed fields |
| Saturation Induction (Bs) | 1.25–1.35 T | High holding force for compact valve solenoids |
| Coercive Force (Hc) | ≤16 A/m | Eliminates residual magnetism and valve sticking |
| Initial Permeability (μ0) | ≥2.5 mH/m | Rapid excitation response under weak fields |
| Maximum Permeability (μm) | ≥18 mH/m | Maximized magnetic circuit efficiency |
| Product Form | Diameter Range (mm) | Tolerance Class | Surface Finish |
|---|---|---|---|
| Fine Spooled Wire | ∅0.05 mm−0.80 mm | ±0.003 mm (Ultra-fine drawn) | Bright Annealed / Diamond Drawn |
| Medium Gauge Wire | ∅0.80 mm−3.00 mm | ±0.010 mm (Precision drawn) | Clean Pickled / Lightly Oxidized |
| Straight Pins & Rods | ∅1.50 mm−8.00 mm | ±0.015 mm (Centerless ground) | Ground / Mirror Polished |
In humid atmospheres, industrial steam, or mild chemical exposure, conventional electrical iron rapidly develops surface oxides that cause solenoid plunger jamming. 1J36 forms a dense, self-passivating nickel-rich oxide layer, ensuring long-term mechanical travel reliability without requiring secondary nickel/chromium electroplating.
With exceptionally low residual magnetic flux and coercivity (Hc≤16 A/m), 1J36 wire prevents electromagnetic latch-up when the coil is de-energized. This delivers instant, repeatable valve shutoff times critical for automated fluid controls and high-frequency pulsed dosing systems.
The 36% Ni-Fe matrix provides stable permeability and low thermal expansion coefficients across common industrial working temperatures (−40∘C to +120∘C), preventing solenoid performance drift in extreme working conditions.
![]()
![]()
![]()
![]()
While 1J50 offers higher initial permeability, 1J36 provides significantly superior atmospheric and moisture corrosion resistance. Pure iron corrodes rapidly in moist air, leading to surface rust and mechanical binding of valve plungers. 1J36 solves this reliability issue without requiring electroplating, which can alter critical dimensional tolerances.
Yes. To achieve optimal soft magnetic properties (lowest coercivity and highest permeability), final magnetic annealing is recommended after cold forming or machining. Standard annealing is carried out at 1050∘C–1150∘C in a dry hydrogen or high-vacuum atmosphere, followed by controlled slow cooling. DLX Alloy can also supply pre-annealed wire for direct winding/forming applications.
Our standard MOQ is 5 kg for standard stock diameters and 20–50 kg for custom wire gauges. Packaging options include precision plastic spools (carton packed) for fine wire, continuous coil bundles wrapped in moisture-barrier film, and reinforced wooden export cases for straightened rods.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!