View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | 6J22 Karma resistance wire ,0.05mm precision alloy wire ,low TCR resistor wire | ||
Engineered for miniature current-sensing and ultra-precise instrumentation, our 0.05mm 6J22 Karma alloy wire delivers an ultra-low temperature coefficient of resistance (TCR), high electrical resistivity, and long-term thermal stability under demanding circuit environments.
![]()
In miniature precision resistor fabrication, thermal drift and thermal electromotive force (EMF) are critical failure modes. Conventional nickel-chromium or copper-nickel alloys often exhibit higher temperature sensitivity or parasitic thermoelectric voltages.
Our 6J22 Karma wire overcomes these limitations through precision vacuum induction melting and controlled micro-alloying:
![]()
| Element | Content (%) |
|---|---|
| Nickel (Ni) | Balance (approx. 73.0 - 75.0) |
| Chromium (Cr) | 19.0 - 21.0 |
| Aluminum (Al) | 2.5 - 3.5 |
| Iron (Fe) | 2.0 - 3.5 |
| Manganese (Mn) | ≤0.80 |
| Silicon (Si) | ≤0.80 |
| Carbon (C) | ≤0.05 |
| Phosphorus / Sulfur (P/S) | ≤0.015 each |
| Parameter | Value / Range |
|---|---|
| Nominal Diameter | 0.050 mm (±0.001 mm ultra-tight tolerance) |
| Density | 8.10 g/cm3 |
| Electrical Resistivity (20∘C) | 1.33±0.06 μΩ·m |
| Temperature Coefficient of Resistance (TCR, −55∘C to +125∘C) | ±5 ppm/∘C to ±10 ppm/∘C (Custom selected) |
| Thermal EMF vs. Copper (0 to 100∘C) | ≤+1.0 μV/∘C |
| Tensile Strength (Rm, Annealed) | 900−1100 MPa |
| Elongation (A100, Annealed) | ≥12% |
| Continuous Service Temperature in Air | Up to 300∘C |
| Melting Point | ≈1390−1420∘C |
| Insulation Coating Options | Bare bright / Polyurethane (UEW) / Polyimide (PI) |
Engineered via specialized secondary heat treatment, 6J22 maintains resistance stability across severe ambient temperature fluctuations (−55∘C to +150∘C), preventing measurement deviation in precision instrumentation.
With a resistivity more than double that of standard CuNi44 (Constantan), 0.05mm Karma wire achieves high target resistance within ultra-compact footprints, ideal for sub-miniature chip and wirewound resistors.
Parasitic thermoelectric voltages generated at terminal junctions are minimized (<1.0 μV/∘C), ensuring micro-ohm and micro-volt level accuracy in precision DC measurement systems.
The protective aluminum-chromium oxide surface layer prevents environmental degradation and drift over extended operating lifecycles, while high tensile strength ensures break-free high-speed automated winding.
![]()
![]()
![]()
![]()
Karma (6J22) provides a significantly higher electrical resistivity (1.33 μΩ·m vs. 0.49 μΩ·m for Constantan) and maintains a flat TCR curve across a wider temperature range with minimal thermal EMF against copper. This enables smaller component package sizes without sacrificing accuracy.
Yes. We provide precision TCR grading according to your circuit design targets, ranging from standard class (±10 ppm/∘C) to premium precision class (±5 ppm/∘C or tighter within selected temperature spans).
We offer bare bright annealed wire as well as enameled options (Polyurethane, Polyesterimide, or Polyimide) with micro-thin, pinhole-free dielectric layers. Standard delivery is on DIN-standard precision plastic spools designed for high-speed automatic winding machines.
Our drawing lines integrate real-time multi-axis laser micrometer monitoring (±0.001 mm tolerance) and online resistance checking to ensure zero necking, high roundness, and uniform linear resistance across every continuous spool length.
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!