View Detail Information
Explore similar products
8mm Bare Wire Thermocouple
Type N Thermocouple Wire NP (Ni-cr-si) NN (Ni-si-magnesium)
ISO9001 JP JN 1.2mm J Type Thermocouple Bare Wire
Type E Thermocouple Bare Wire
Product Specification
| High Light | 0.5mm Type K thermocouple wire ,Type K thermocouple bare wire ,industrial furnace thermocouple wire | ||
High-precision 0.5mm Type K thermocouple wire designed for accurate, repeatable temperature measurement in industrial heat-treating furnaces, kilns, and thermal processing equipment. Featuring high-purity positive (Chromel / KP) and negative (Alumel / KN) conductors, this wire guarantees Class 1 thermoelectric tolerance and long-term signal integrity under harsh oxidizing and inert furnace atmospheres.
![]()
The 0.5mm Type K thermocouple wire is the industry-benchmark temperature sensing conductor engineered for extreme thermal environments ranging from -200°C to +1260°C. Composed of a non-magnetic Nickel-Chromium positive leg (KP) and a magnetic Nickel-Alumel negative leg (KN), this wire exhibits a linear EMF-to-temperature characteristic with a sensitivity of approximately 41 µV/°C.
Manufactured using closed-loop vacuum induction melting and precision multi-die cold drawing, our 0.5mm diameter thermocouple conductors maintain uniform metallurgical structure, ultra-tight diameter tolerances (±0.008 mm), and consistent grain boundary stability. This ensures zero EMF deviation, superior mechanical ductility for flexible sensor fabrication, and high resistance to oxidation and sulfur corrosion in industrial vacuum, inert gas, and continuous atmospheric furnace systems.
![]()
| Parameter Category | Technical Specification Detail |
|---|---|
| Thermocouple Type | Type K (Chromel-Alumel / KP-KN) |
| Conductor Diameter | 0.50 mm (Nominal tolerance ±0.008 mm) |
| Positive Leg (KP) Composition | Ni ~90%, Cr ~10% (Non-magnetic) |
| Negative Leg (KN) Composition | Ni ~95%, Al ~2%, Mn ~2%, Si ~1% (Magnetic) |
| Operating Temperature Range | Continuous: 0°C to 1100°C; Short-term Peak: up to 1260°C |
| Calibration Tolerance / Accuracy | Class 1 / Special Tolerance: ±1.5°C or ±0.4% |
| Thermoelectric Output (EMF) | Approx. 41.276 mV at 1000°C (Linear output ~41 µV/°C) |
| Resistance per Double Meter (20°C) | Approx. 5.10 – 5.40 Ω/m (Conductor pair) |
| Melting Point | Positive Leg: 1420°C; Negative Leg: 1395°C |
| Tensile Strength (Annealed State) | 550 – 750 MPa |
| Elongation (Annealed State) | ≥ 20% |
| Supply Form & Packaging | Continuous spool (DIN 100/DIN 125/DIN 160) or custom coil |
![]()
![]()
![]()
![]()
A1: The recommended maximum continuous operating temperature in oxidizing or clean inert furnace atmospheres is 1100°C. For short-term peak exposure, the wire can withstand up to 1260°C. For reducing, sulfidizing, or alternating oxidizing/reducing atmospheres, protective ceramic or metal sheathing is advised to prevent "green rot" selective oxidation.
A2: The positive leg (KP / Chromel) is non-magnetic, slightly stiffer, and typically has an oxidized or bright metallic finish. The negative leg (KN / Alumel) is noticeably magnetic and contains aluminum and manganese additions. A simple magnet test readily separates the two conductors.
A3: Our wire conforms strictly to Class 1 / Special Tolerance limits, offering an accuracy of ±1.5°C in the range of -40°C to 375°C, and ±0.4% of the measured temperature from 375°C to 1000°C, which is superior to standard commercial grades.
A4: Yes. The annealed wire possesses high weldability. Common junction welding techniques include tungsten inert gas (TIG) welding, laser welding, and capacitive discharge welding. A protective argon shield during welding is recommended to form a clean, oxide-free spherical junction bead.
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!