View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | 1J30 soft magnetic alloy rod ,1J30 rod for magnetic devices ,precision 1J30 alloy rod | ||
High-precision 1J30 soft magnetic alloy rods (thermomagnetic compensation Fe-Ni alloy) manufactured by DLX Alloy. Engineered specifically for temperature compensation in permanent magnetic circuits, measuring instruments, voltage regulators, and sensitive magnetic devices with ultra-pure metallurgy and customized dimensional tolerances.
![]()
1J30 alloy belongs to the precision Fe-Ni soft magnetic material series, optimized specifically for temperature-dependent magnetic shunt and compensation functions. In high-accuracy electromagnetic devices, permanent magnets naturally experience magnetic flux degradation as ambient or operational temperatures rise. DLX 1J30 soft magnetic rods act as intelligent magnetic bypass elements: as temperature increases, the magnetic permeability and saturation induction of 1J30 decrease sharply, directing more main magnetic flux through the working gap and stabilizing the overall device output across dynamic thermal ranges (-40°C to +80°C).
Refined through Vacuum Induction Melting (VIM) and Electroslag Remelting (ESR), DLX 1J30 rods provide ultra-low non-metallic inclusions, uniform grain structure, and exact chemical consistency, guaranteeing reliable compensation curves across every production batch.
![]()
| Element | Nickel (Ni) | Carbon (C) | Silicon (Si) | Manganese (Mn) | Phosphorus (P) | Sulfur (S) | Iron (Fe) |
|---|---|---|---|---|---|---|---|
| Standard Range (%) | 29.5 - 31.0 | ≤ 0.04 | ≤ 0.20 | 0.20 - 0.50 | ≤ 0.020 | ≤ 0.020 | Balance |
| Property Parameter | Metric Value | Notes & Conditions |
|---|---|---|
| Density | 8.10 g/cm³ | At 20°C |
| Curie Temperature (Tc) | ~35°C to 55°C (308 K - 328 K) | Tailored by precise Ni content control |
| Operating Temperature Range | -40°C to +80°C | Optimized linear compensation zone |
| Electrical Resistivity | ~0.75 μΩ·m | 20°C annealed state |
| Thermal Expansion Coefficient | ~10.5 × 10⁻⁶ /K | 20°C to 100°C |
| Magnetic Induction at 20°C (B20) | 0.25 - 0.45 T | Tested at H=1600 A/m |
| Thermomagnetic Coefficient | High linearity drop rate | Custom matched to magnet grades |
| Delivery State | Cold drawn / Centerless ground / Annealed | Custom temper per drawing |
| Diameter Range | Φ 2.0 mm – Φ 120.0 mm | Custom lengths & precision cut |
| Dimensional Tolerance | h7, h8, h9 precision grades | High-accuracy centerless grinding |
![]()
![]()
![]()
![]()
A: 1J30 is primarily used as a temperature compensation shunt. Permanent magnets naturally lose magnetic strength when heated; by placing a 1J30 alloy rod/shunt in parallel with the working gap, the shunt loses its magnetic conductivity even faster as temperature rises, automatically redirecting more magnetic flux to the working air gap and keeping device performance steady.
A: Yes. The Curie temperature of Fe-Ni thermomagnetic alloys is directly correlated with fine nickel composition and annealing processes. DLX engineers can fine-tune the nickel ratio within fractional percentages to provide customized Curie thresholds and compensation slopes between -40°C and +80°C.
A: We supply 1J30 rods in cold-drawn, peeled, centerless ground (polished), and vacuum-annealed conditions. Standard tolerances range from h9 down to high-precision h7, tailored for direct CNC machining or stamping.
A: Every heat undergoes vacuum induction melting (VIM) with closed-loop optical emission spectroscopy. Sample bars from each batch are tested in dedicated variable-temperature magnetic permeameter chambers to verify the exact flux-temperature curve (B-T curve) before final release.
A: We provide dynamic MOQs according to standard bar stock and custom diameter requirements. Standard diameter rods typically ship within 10–15 business days, while customized alloy heats and precision ground bars are scheduled within 20–30 business days with worldwide logistics support.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!