View Detail Information
Explore similar products
8mm Bare Wire Thermocouple
Type N Thermocouple Wire NP (Ni-cr-si) NN (Ni-si-magnesium)
ISO9001 JP JN 1.2mm J Type Thermocouple Bare Wire
Type E Thermocouple Bare Wire
Product Specification
| High Light | 0.5mm Type J thermocouple wire ,Iron-Constantan thermocouple bare wire ,Type J thermocouple for injection molding | ||
Explore high-purity 0.5mm Type J (Iron-Constantan) thermocouple wire designed specifically for plastic injection molding nozzles, hot runners, and extrusion barrels. Exceptional thermoelectric stability and extended service life.
![]()
Maintaining tight thermal windows in plastic injection molding requires sensor conductors that resist drift under continuous thermal cycling and mechanical vibration. Our 0.5mm Type J Thermocouple Wire is manufactured through vacuum induction melting followed by multi-pass precision drawing and protective atmosphere continuous annealing.
![]()
| Parameter / Property | Positive Leg (JP) | Negative Leg (JN) |
|---|---|---|
| Material Designation | High-Purity Iron (Fe) | Constantan (Cu-Ni Alloy) |
| Nominal Chemical Composition | Fe ≥ 99.5% | ~55% Cu, 45% Ni + Mn Balance |
| Conductor Diameter | 0.50 mm (±0.008 mm Ultra-Tight Tolerance) | 0.50 mm (±0.008 mm Ultra-Tight Tolerance) |
| Magnetic Property | Magnetic | Non-Magnetic |
| Operating Temperature Range | -40°C to +750°C (-40°F to +1382°F) | -40°C to +750°C (-40°F to +1382°F) |
| Standard Calibration Class | Class 1 / Special Tolerance (±1.5°C or ±0.4%) | Class 1 / Special Tolerance (±1.5°C or ±0.4%) |
| Density (g/cm³) | 7.86 | 8.90 |
| Tensile Strength (Annealed, MPa) | 320 – 480 | 450 – 580 |
| Elongation at Break (%) | ≥ 22% | ≥ 25% |
| Supply Form | DIN 100/125/160/200 Plastic Spools, Coils, Cut Rods | DIN 100/125/160/200 Plastic Spools, Coils, Cut Rods |
The calibrated 0.5mm wire diameter delivers minimal thermal mass, enabling instantaneous temperature feedback to PID controllers in high-cycle injection molding cycles.
Every batch is matched and tested across the full thermal curve to ensure absolute repeatability between replacement thermocouple probes, eliminating recalibration downtime.
Uniform bright annealing ensures soft temper, allowing the wire to bend tightly around hot runner contours and nozzle bodies without micro-cracking or resistance shifts.
Unlike Type K wires which can suffer from selective oxidation ("green rot") in reducing environments, Type J Iron-Constantan conductors maintain robust chemical and thermoelectric integrity.
![]()
![]()
![]()
Type J (Iron-Constantan) offers a higher Seebeck coefficient (~50 to 55 µV/°C) within the typical plastics processing window (150°C to 400°C), providing superior sensitivity and noise resistance. Furthermore, it operates reliably in reducing and enclosed mold conditions without drifting.
In oxidizing environments, the pure Iron (JP) leg will oxidize rapidly at temperatures exceeding 550°C. For oxidizing atmospheres above 550°C, heavier gauge wires or protective ceramic/metallic sheaths are recommended.
We supply 0.5mm Type J wire on precision DIN standard plastic spools (such as DIN 100, DIN 125, DIN 160, and DIN 200) with level layer winding to ensure smooth, tangle-free feeding on automatic coilers and stripping equipment.
Our standard MOQ starts flexibly at 5 kg per batch for standard specifications, supporting pilot sensor builds as well as continuous containerized volume orders.
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!