View Detail Information
Explore similar products
Nimonic 80A 8020 Nimonic 75 High Temperature Nickel Alloy
Nimonic 90 Pyromet 90 Udimet 90 High Temperature Aluminium Alloys
Nimonic C 263 5120 Haynes 263 High Temperature Nickel Alloy
Pyromet 90 High Temperature Nickel Alloy
Product Specification
| High Light | Oxidation Resistant Nickel Alloy Plate ,3mm GH2747 Plate ,Thermal Processing Equipment Nickel Alloy Plate | ||
Engineered for extreme thermal environments, DLX GH2747 3mm nickel alloy plate delivers unmatched oxidation resistance up to 1250°C, high thermal creep strength, and minimal thermal distortion for continuous furnace operations, heat treating fixtures, and petrochemical reactor internals.
![]()
In modern thermal processing and continuous heating systems, structural materials face severe degradation from high-temperature oxidation, carburization, and thermal fatigue. Standard stainless steels and generic heat-resistant alloys rapidly develop scale spallation, embrittlement, and wall thinning when subjected to temperatures exceeding 1000°C.
DLX GH2747 3mm oxidation resistant nickel alloy plate is metallurgical-designed to bridge this gap. By forming a dense, self-healing continuous aluminum-chromium oxide surface film, GH2747 prevents aggressive atmospheric penetration under oxidizing, neutral, and alternating combustion atmospheres. The 3.0 mm calibrated plate profile provides optimal mechanical rigidity and high-temperature load-bearing capacity while maintaining efficient thermal transfer and ease of fabrication.
Every plate undergoes precise cold/hot rolling, continuous bright annealing, and strict ultrasonic verification to ensure uniform grain boundary structure, tight dimensional tolerance, and flawless surface finish free of micro-cracks or inclusions.
![]()
| Element | Symbol | Composition (wt. %) |
|---|---|---|
| Nickel | Ni | 45.00 – 49.00 |
| Chromium | Cr | 18.00 – 22.00 |
| Aluminum | Al | 2.50 – 3.50 |
| Iron | Fe | Balance |
| Carbon | C | ≤ 0.08 |
| Manganese | Mn | ≤ 0.50 |
| Silicon | Si | ≤ 0.60 |
| Phosphorus | P | ≤ 0.020 |
| Sulfur | S | ≤ 0.015 |
| Property | Value | Unit |
|---|---|---|
| Density | 8.12 | g/cm³ |
| Melting Range | ~1360 – 1410 | °C |
| Max Continuous Working Temperature | 1250 (Intermittent up to 1300) | °C |
| Thermal Conductivity (20°C - 1000°C) | 11.2 – 24.5 | W/(m·K) |
| Specific Heat Capacity | 460 | J/(kg·°C) |
| Electrical Resistivity | 1.18 | μΩ·m |
| Mechanical Property | Test Standard / Condition | Minimum Specified Value |
|---|---|---|
| Tensile Strength (Rm) | Room Temperature (20°C) | ≥ 680 MPa |
| Yield Strength (Rp0.2) | Room Temperature (20°C) | ≥ 300 MPa |
| Elongation (A5) | Room Temperature (20°C) | ≥ 30% |
| Hardness | Brinell Scale | ≤ 220 HBW |
| High-Temperature Stress Rupture | 1000°C / 100h | ≥ 25 MPa |
| Parameter | Standard Dimension | Tolerance & Availability |
|---|---|---|
| Thickness | 3.0 mm | ±0.05 mm (High Precision Tolerance) |
| Width | 1000 mm / 1219 mm / 1500 mm | Custom slitting available upon request |
| Length | 2000 mm / 2438 mm / 3000 mm | Custom coil or cut-to-length available |
| Surface Finish | 2B / Bright Annealed / Descaled & Pickled / Polished | Fully customized per application |
The balanced high-chromium and aluminum chemistry enables GH2747 to rapidly generate a tenacious, adherent Al2O3-Cr2O3 protective layer at elevated temperatures. This barrier effectively resists scaling, spallation, and grain-boundary oxidation up to 1250°C, substantially extending component service life in continuous thermal cycling.
Engineered with solid-solution strengthening and micro-alloy stabilization, DLX GH2747 3mm plate exhibits exceptional resistance to structural sagging, high-temperature creep deformation, and thermal shock during cyclic heating and rapid furnace shutdowns.
Unlike conventional brittle heat-resistant cast alloys, our wrought GH2747 3mm sheet maintains high ductility in the annealed state. It can be easily laser-cut, CNC punched, brake-formed, and joined using standard TIG/MIG welding techniques without post-weld micro-fissuring.
The alloy matrix exhibits low thermal expansion mismatch against heating elements and refractory linings, while demonstrating robust resistance against protective gas cracking, carbon diffusion, and reducing/oxidizing alternating industrial gases.
![]()
![]()
![]()
![]()
A: While Inconel 600 and Incoloy 800H are well-suited for moderate temperatures (up to 1000°C–1100°C), GH2747 is specifically alloyed with high aluminum and chromium to form an alumina-dominant surface layer. This enables GH2747 to resist cyclic oxidation up to 1250°C and maintain higher creep-rupture resistance without severe scale spallation in combustion and industrial furnace atmospheres.
A: The 3mm thickness offers an optimal balance between structural rigidity and forming flexibility. In the solution-annealed condition, GH2747 plates can be cold-bent and sheared cleanly. For welding, GTAW (TIG) is recommended using matching GH2747 filler wire or high-performance nickel-base consumables under pure argon backing gas. Preheating is not required.
A: Every shipment includes comprehensive inspection reports comprising positive material identification (PMI), chemical analysis, room-temperature & high-temperature tensile test data, hardness reports, dimensional tolerance verification, and ultrasonic test certificates (UT Grade A/B compliant with precision equipment criteria).
A: Custom production MOQ is flexibly aligned with specific project bill-of-materials and plate dimensions. Standard sheet sizes are readily prepared from semi-finished stock within 7–15 working days. Export orders are packaged with waterproof moisture-barrier wrapping, edge protection angles, interleaved paper/protective film, and reinforced fumigated wooden crates suitable for long-distance ocean and air freight.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!