XIAN ATO INTERNATIONAL CO.,LTD
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 5sets/month |
| Delivery Time | 45 work days |
| Packaging Details | Wooden |
| Product | Vertical cutting dryer |
| Model | ATOSY1003 |
| Speed (r/min) | 910 |
| Screen Half Cone Angle ( °) | 15° |
| G-force | 424 |
| Inner diameter（mm） | 915 |
| Screw differential speed（r/min） | 13 |
| Screen gap（mm） | 0.3、0.4、0.5 |
| Motor power（kw） | 55 |
| Max. Capacity（t/h） | 60 |
| Fluid in the cuttings（%） | 3-8 |
| Brand Name | ATO |
| Model Number | ATOSY1003 |
| Certification | API |
| Place of Origin | China |
View Detail Information
Explore similar products
Explosion Proof ExdIIBT4 Solid Control Equipment Drilling Shale Shaker
Solid control system drilling pump mud agitator operating instructions
Solid control system drilling pump spray pump
SB Series Centrifugal Mud Pump with 320m3/h Flow 35M Lift and Tungsten Carbide
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 5sets/month |
| Delivery Time | 45 work days | Packaging Details | Wooden |
| Product | Vertical cutting dryer | Model | ATOSY1003 |
| Speed (r/min) | 910 | Screen Half Cone Angle ( °) | 15° |
| G-force | 424 | Inner diameter（mm） | 915 |
| Screw differential speed（r/min） | 13 | Screen gap（mm） | 0.3、0.4、0.5 |
| Motor power（kw） | 55 | Max. Capacity（t/h） | 60 |
| Fluid in the cuttings（%） | 3-8 | Brand Name | ATO |
| Model Number | ATOSY1003 | Certification | API |
| Place of Origin | China | ||
| High Light | 60t/H Solid Control Equipment Drilling ，60t/H Vertical Cutting Dryer ，60TPH Vertical Cutting Dryer | ||
Solid control system vertical cutting dryer ATOSY1003 motor power 55KW
Features
1. The annular drain groove of the?Cutting Dryer?is installed at an oblique angle at 4°and the drain port is in the bottom of the groove. A vent is designed above the drain port. It’s helpful to discharge the viscous liquid when open the vent.
2. Wear-resistant material is adapted to those parts where may hit by the speeding solids come from the centrifuge. By doing this, we effectively prolong service life of relevant components.
3. Viewing port is designed for check the screen and helix scraper.
4. Mechanical overload protection device would stop the vertical cutting dryer motor running whenever the torque is larger than rated.
5. 3k planetary differential makes the belt drive structure more compact.
6. Diluted oil concentrated lubrication system allow the lubricant enter from the center of differential input shaft. With flowing of lube, the differential and the spiral bearing are lubricated. Lube be gathered in accumulator tray after main shaft be lubricated. Then lube would return to lubrication system through the pipe due to its gravity.
7. When the cutting dryer is running, if oil train be block, the flow valve transmits emergency signal which would stop the oil pump motor and main motor immediately. All these designs are to protect differential components, spiral shaft and main shaft from damage due to poor lubrication.
8. Newly designed and unique structure of sludge discharge pipe and sludge collector makes sure the vertical centrifuge dropping and no jam.
9. A frame base is installed under the main motor. The two parts are connected by eight shock absorbers through which can isolate the main motor from vibration effectively.
Specifications
| Model Number | Solvedrilling LL915 Cutting Dryer |
| Speed (r/min) | 910 |
| Screen Half Cone Angle ( °) | 15° |
| G-force | 424 |
| Inner diameter(mm) | 915 |
| Screw differential speed(r/min) | 13 |
| Screen gap(mm) | 0.3,0.4,0.5 |
| Motor power(kw) | 55 |
| Max. Capacity(t/h) | 60 |
| Fluid in the cuttings(%) | 3-8 |
Company Details
Business Type:
Exporter,Trading Company
Year Established:
2008
Total Annual:
500000-600000
Employee Number:
20~50
Ecer Certification：
Verified Supplier
Xi’an ATO International Co., Ltd. is China Oilfield Equipment Supplier for Middle East Drilling Contractors, founded in 2008, belongs to ATO Group, which is located in Xi'an, China. ATO supplies API standard drilling equipment, such as mud pump spare parts, BOP components and oilfield tools fr... Xi’an ATO International Co., Ltd. is China Oilfield Equipment Supplier for Middle East Drilling Contractors, founded in 2008, belongs to ATO Group, which is located in Xi'an, China. ATO supplies API standard drilling equipment, such as mud pump spare parts, BOP components and oilfield tools fr...
Get in touch with us
Leave a Message, we will call you back quickly!