Smart Control Dry Mix Plant Environmental Friendly With Dust Removal System

Product Specification

Dry mix powder mortar blending plant mordene equipment dry mix plant

Description:

Dry mortar is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing. It can be used directly just by adding water in construction site. It has different properties though adding different additives.

We can design the most reasonable dry mortar production line with factory price according to your Budget investment, Capacity, Area condition, Formula, Different end products,etc. These dry mortar plants can add configurate with crushing machine, screen machine and drying machine, in the area of lack of dried sand.

Parameter of BH dry mortar plant:

BH dry mortar plant advantages of main components:

1. Raw material storage tank:
The dry mortar production line is used to store bulk materials such as cement, fly ash and sand. In this case, the domestic common 50-ton or 100-ton cement silo (customer selection) is used as the raw material warehouse, generally adopting three raw material warehouses of cement, fly ash and sand. The cement and fly ash are fed by tank trucks, and the sand is loaded by bucket elevators.
2. Sand dryer:
It is used to dry wet sand. The system includes feeder, bucket elevator, hot blast stove, dryer, sieve, dust removal, cooling, conveying, lifting and other equipment. The sand-drying device is used for the production system of dry powder mortar with large output.
3. Batching device:
It consists of a hopper weighing scale, a screw conveyor, a discharge device, a force sensing device, and a computer control system. It can automatically measure different raw materials according to the formula, reduce labor intensity and environmental pollution, and also ensure the quality of dry mortar products.
4, the mixer:
The requirements for the dry mortar mixer are: evenly mixed, no dead angle, wear-resistant equipment, and fast feeding speed. Our company uses a two-axis gravityless mixer as the main mixer. Evenly mixed, high efficiency and short time. The main machine is equipped with a high-manganese wear-resistant lining plate with a thickness of 20mm, which has long service life and convenient replacement.
5, dry powder packaging machine:
There are two kinds of open pockets and valve pockets. Dry powder mortar is used more in the valve pocket packaging machine, because the valve pocket packaging does not need to be slit, as long as one person can operate, the open-pocket packaging scale can pack various materials, but the seam is required after bagging. This packaging machine requires one more operator than the valve pocket packaging machine.
6, dust collector:
It is used to recycle dust from the dry mortar production line and is environmentally friendly. The dust suction port is generally located at the top of the cement silo, the hopper inlet, the filling machine, and the like.
7. Conveying and lifting structure:
The material conveying methods used in the production silo are: horizontal conveying and vertical conveying, horizontal conveying can use screw conveyor, vertical conveying generally adopts bucket elevator, and electric hoist can also be used.
8. Fully automatic industrial control system:
It consists of PLC industrial computer, high-voltage cabinet, touch screen and computer. At present, the quality of mortar disposed on the construction site is unstable, the strength is not up to the requirement, and the dry-mixed mortar is industrialized, and the raw materials and mix ratio are strictly controlled to ensure stable and reliable mortar quality.

Inner structure of dry mix plant:

Installation site: