Mianyang Prochema Commercial Co.,Ltd.
| Place of Origin | China |
| Brand Name | Prochema |
| Model Number | |
| Certification | MSDS |
View Detail Information
Explore similar products
FEP film
FEP skived sheet 0.5 to 4mm x 300mm
FEP moulded rod
FEP Welding rod ,5mm FEP triangle welding rod
Product Specification
| Place of Origin | China | Brand Name | Prochema |
| Model Number | Certification | MSDS | |
| High Light | fep tube ，FEP pipe ，FEP | ||
FEP coiler , FEP coil pipe, FEP snake tube, FEP pipe in coil
Introduction:
FEPtube is made from FEP resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property. It can be solid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature is up to 200 and is an ideal material for circuit board and flat cable.
FEP coil pipe:
1 good cooling performance,
2 Corrosion resistance
3 large and bending around the curve,
4 long life cycle
Features:
The characteristic is a large and bending around the curve, since the minimum bend radius increases with the pipe diameter.
Uses:
Properties :
High low temperature resistance:
-200--200°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=1150o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
High diaphaneity
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient
Technical index of FEP:
| Item | Value | ||
| General purpose | Electric purpose | ||
| Density g/cm3 | 2.12-2.17 | 2.12-2.17 | |
| Temperature range°C | -200 -+200 | -200 -+200 | |
| Longi&tray,shrink rate %≤ | 3.0 | 3.0 | |
| Tensile strength Mpa ≥ | 14 | 14 | |
| Elongation at break %≤ | 175 | 175 | |
| Tear Strength (N/m) ≥ | 4.9x104 | 4.9x104 | |
| Dielectric Constanct (106Hz) | 2.15 | ||
| Dissipation Factor 106Hz≤ | 1x10-3 | ||
| Volume resistance (Ω.m) | 1x1014 | ||
Dielectric StrengthTH≤0.05mm Th 0.05-0.1mm M/VTH ≥0.1mm | 100 | ||
| 75 | |||
| 50 | |||
Specification
Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.
For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .
Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)
Plastic bag &carton . Customized is acceptable
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,TradingCompany,Seller
Year Established:
2004
Total Annual:
$1,000,000-$5,000,000
Employee Number:
>less than 50
Ecer Certification：
Active Member
Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers... Everyday new companies open, and companies die. Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers...
Get in touch with us
Leave a Message, we will call you back quickly!