PLC Paper Cardboard Foil Stamping Die Cutting Machine 7500s/H

Product Specification

PLC Control Paper Cardboard Die Cutting Stripping Machine 1060S

TD1060S

   TD1060S automatic die cutter is mostly used to cut carton and thin corrugated. Adopts PLC and colorful touch screen to check the running condition and display errors.

It is used for automatic stamping roll material, after printing, lamination. Suitable for the production of paper boxes, paper cups, wrapping labels, cardboard embossing, portable paper bags, paper covers, PVC, various plastics, etc....

 Main Features:

1. Transmission of main unit adopts the imported A/C frequency converter control, start-up and stop of the machine are controlled by means of imported air clutch.
2. Running of the whole machine is controlled by PLC. Through the interface touch-screen monitoring the machine running condition,trouble indications and their corresponding solving ways, the operation is more user-friendly.
3. Independent temperature control to each heating zone makes operation temperature of the machine more equal and stable.Function of timing pre-heating can enhance working efficiency greatly.
4. With CE certification .

UNITS OF THE EQUIPMENT

Feeding/delivery unit

1. Automatic feeder rolls back quickly to give easy access for make ready and locks up in seconds
2. One feeding bar for suitable paper infeed
3. One delivery hand with 6 delivery fingers, adjustable according to paper size
4. Automatic elevated feeding pile

Main machine

1. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting
2. Two horizontal, cross pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy
3. Air blast system helps to separate foil from stock on critical jobs
4. Micrometer adjustment on side guide and front guide
5. Adjustable dwell on impression
6. Honeycomb base is convenient for loading
7. Missed sheet detector
8. 4 heating zones with digital control
9. 24 hours preheating device
10. Control system with touch screen HMI, PLC and servo system.

4.About our factory

EcooGraphix Die Cutters are produced by the leading manufacture in China ,which has a long history more than 90years. It is the first factory to produce and supply the Die Cutting ,Foil Stamping and Automatic Gluing machines .There are thousands of Die Cutting Machines installed worldwide. And two units EcooGraphix TDS790 were installed in Hungary in 2017.

Quality Control

Professional control department which is responsible for all the machines.

Full checking list including mechanical and electrical detection on the machine.

Strict standard for registration and over 24 hours non-stop running on each machine.

Follow the policy of ‘One person responsible for one machine’ ,‘Claim responsibility if machine has assemble problem’.

Service

All of our technicians have over 10-20 years experience.

Rich experience in installation, repairing and maintenance overseas.

After-sales staff Whatsapp/Wechat on line 24/7.

Guarantee to provide after-sales service for any machine for whole using life.

FAQ:
1. What are your main products ?

EcooGraphix is a leading and professional Supplier for Prepress Solution , Printing Materials and Post Packing Equipment.
Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor , Offset Plates ,inks , blankets , postpress Packaging equipments and so on.
There are thousands CTPs installed worldwide. Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South Africa and so on are very pleased with our Technician Support service and product performance.
We can also supply the thermal CTP plate(single and double layers),positive CTCP plates(single and double layers) and Chemistry free CTP plate.
You can get the prepress equipment and consumables all in one and no worry about the after-sales service from our company.
2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTPs, One year for the Processor.
If the customer uses Ecoographix CTP plate with the CTP machine,we will provide the Lifetime Warranty.
4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V9.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.