EDDYSTAR Carbon Fiber Airbox Intake System
Premium sealed carbon fiber intake system designed specifically for VW Touareg 7P 3.0T TSI V6 models (2011-2018)
Product Overview
The VW Touareg II (7P) with the 3.0L V6 TSI represents one of the most underrated luxury SUVs ever built, featuring a supercharged V6, permanent all-wheel drive, and a chassis shared with the Porsche Cayenne. However, the factory airbox compromises performance with plastic housing and restrictive airflow design.
EDDYSTAR's sealed carbon fiber airbox addresses these limitations through advanced material engineering and precision design, delivering measurable airflow improvements while maintaining refined operation.
Technical Advantages
Superior Thermal Management
Prepreg carbon fiber offers thermal conductivity approximately 1/40th that of aluminum, preventing heat transfer into the intake tract and eliminating heat retention issues common with plastic components.
Optimized Airflow Performance
The factory Touareg 7P 3.0T airbox utilizes a panel filter (OE: 7P0 129 620 A) that DNA Filters' high-flow replacement improves by 18% (232.70 CFM vs OEM 197.10 CFM) while maintaining 98-99% filtration efficiency. EDDYSTAR's system replaces restrictive components with smooth-bore carbon intake tubing and high-flow washable filtration.
Product Specifications
| Material | 100% Prepreg Carbon Fiber (2×2 Twill Weave) |
| Design | Sealed Airbox + Carbon Intake Tube |
| Air Filter | High-Flow 4-Layer Cotton Gauze, Washable & Reusable |
| Heat Shield | Integrated Thermal Barrier |
| MAF Mount | Factory Spec, Direct Fit |
| Fitment | Direct Bolt-On, No Modification Required |
| Airflow Gain | +18% over stock (232.70 CFM vs 197.10 CFM, DNA Equivalent) |
| Filtration Efficiency | 98-99% (ISO 5011) |
| Engine Compatibility | 3.0L V6 TSI (EA839 / CGW / CRE) |
| Sound Characteristics | Enhanced Supercharger Whine & Engine Note |
| Finish | Gloss Clear Coat, UV Resistant |
| Color Options | Red and Black |
Included Components
- 1 × Carbon Fiber Airbox (with removable lid)
- 1 × Carbon Fiber Intake Tube
- 1 × High-Flow Air Filter
- Complete Mounting Hardware & Hose Clamps
- Detailed Installation Guide
Vehicle Fitment
Direct Fit Applications
- VW Touareg II 7P 3.0 TSI V6 (2011-2018)
- VW Touareg II 7P 3.0 TSI V6 Hybrid (2011-2015)
Compatible Applications (may require different mounting hardware)
- Audi Q7 4M 3.0 TFSI V6 (2015-2019)
- Audi Q8 4M 3.0 TFSI V6 (2019+)
- Porsche Cayenne 958 3.0T V6 (2011-2017)
OE Reference Numbers
Main OE: 7P0 129 620 A (7P0129620A)
Compatible OE: 7L0 129 620 / 7L0 129 620 A / PHE500021 / 95511013110 / 95811013010
EDDYSTAR Product Code: EY-CFR-VO18
Air Filter Dimensions
Length: ~320 mm | Width: ~245 mm | Height: ~42 mm
Important Notes: Designed for off-road/racing use only in some regions. Check local regulations. Professional installation recommended. Always inspect filter and hardware before every use.
Product Images
Frequently Asked Questions
Will this carbon fiber intake fit my 2016-2017 VW Touareg 3.0T?
Yes. It is designed specifically for the VW Touareg II (7P) with the 3.0L V6 TSI engine (2011-2018). Direct bolt-on fit with factory mounting points. Fits both standard and Hybrid models.
Does it require ECU tuning?
No. It works with the factory ECU. No remapping of ECU or DME is required. A custom tune can maximize gains but is not necessary.
What performance gains can I expect?
DNA Filters' high-flow replacement for the Touareg 7P 3.0T platform flows 232.70 CFM versus the OEM 197.10 CFM -- an 18% increase with 98-99% filtration efficiency. APR's carbon fiber intake for the same EA839 V6 platform flows up to 34% more than stock. Gains vary by fuel quality, altitude, and supporting mods.
Will it fit other VW/Audi 3.0T models?
Yes. It also fits Audi Q7 (4M), Audi Q8 (4M), Porsche Cayenne (958/9YA), and VW Touareg III (CR) with the 3.0T V6 engine. Some models may require different mounting hardware.
Will it trigger a check engine light?
No, if installed correctly. The MAF sensor housing is designed to factory specifications. Always reconnect the sensor properly.
How do I clean the filter?
Use a cold air intake cleaning kit. The filter is a washable, reusable high-flow design with 98-99% filtration efficiency and 4 layers of cotton gauze. Clean every 30,000-50,000 km depending on driving conditions.
Is installation difficult?
It is a direct bolt-on job using factory mounting locations. Basic hand tools are enough. Installation takes about 60-90 minutes. Professional installation is recommended.
Does it increase intake sound?
Yes. You will hear more turbo spool and diverter valve sound, especially under acceleration. The sealed airbox design keeps the sound refined and reduces unwanted intake drone at highway speeds.
What is the factory OE part number?
The main air filter OE number is 7P0 129 620 A (or 7P0129620A). Also compatible with 7L0 129 620, 7L0 129 620 A, PHE500021, 95511013110, and 95811013010. This helps confirm fitment.
What warranty do you offer?
Limited 2-year warranty against manufacturing defects. Does not cover improper installation or racing use.