BA 430 Stainless Steel Sheet 0.5mm Thick For Elevator Surface

Product Specification

BA 430 stainless steel sheet 0.5mm thick suitable for elevator surface

Mechanical properties:

Moderate strength: 0.5 mm 430 stainless steel plate has a certain strength and can withstand a certain degree of external force without excessive deformation or damage, meeting the requirements of a variety of general structural and decorative applications.
Good plasticity and ductility: It is convenient for various processing operations, such as bending, stretching, stamping, etc., and can adapt to the manufacturing needs of different shapes and structures, such as parts or shells of various shapes.

 
Processing technology:

Cold processing performance:

It is relatively easy to cold process, but its toughness may be slightly worse than that of 304 stainless steel. During cold processing, such as cold rolling, cold bending, cold stamping, etc., it is necessary to control the processing force and degree of deformation to avoid problems such as cracks or fractures.
Hot processing performance:

It is suitable for hot processing, such as forging, hot rolling, etc. During hot processing, it should be evenly heated to a suitable temperature range (usually 816 - 1038°C), and then the corresponding processing operations should be carried out, and then cooling and annealing treatment should be carried out to eliminate processing stress and restore the performance of the material. However, it is necessary to avoid long-term exposure to the forming temperature to prevent excessive grain growth, resulting in an "orange peel" texture on the surface of the material, affecting the surface quality and performance.

Surface treatment:

Different surface effects and performance can be obtained through a variety of surface treatment methods

2B surface:

It is silvery white with good gloss and flatness. It is a common surface treatment state and is suitable for occasions that require high surface appearance and do not require a high mirror effect, such as home appliance housings, building decorative panels, etc.
BA surface:

The surface has excellent gloss and high reflectivity, just like a mirror surface. It has been processed through multiple processes such as hot rolling, annealing, shot peening, pickling, cold rolling, annealing, pickling, surface polishing, and tempering rolling. It is often used for products with extremely high surface reflectivity and finish requirements, such as high-end tableware, sanitary ware, etc.
No.4 surface:

It usually has good gloss and fine lines on the surface. It is obtained by polishing and tempering rolling 2D or 2B products with 150-180 abrasive materials (JISR6002). It can be used for some decorative or functional parts that require a certain gloss and a certain texture effect.

 Application areas:

Architectural decoration industry: Due to its good corrosion resistance and beautiful surface, it can be used for interior and exterior decoration of buildings, such as wall decoration panels, ceilings, curtain walls, etc.

Home appliance industry:
It is a common material for home appliance components, such as the lining and shell of refrigerators and washing machines, the shell of microwave ovens, water heaters, etc. and some internal structural parts. For example, refrigerator doors usually use 0.6-0.8 mm 430 cold-rolled stainless steel plates, while the thickness of cold-rolled plates for refrigerators is generally 0.4-0.6 mm; microwave oven liner and shells often use 0.4-0.5 mm thick 430 stainless steel cold-rolled plates because there is no complex deformation processing.
Kitchenware industry:
Because it is safe, non-toxic, corrosion-resistant and easy to clean, it is widely used in the production of various kitchenware, such as pots, tableware, sinks, etc.
Automotive industry:
It can be used for some parts of automobiles, such as decorative strips, exhaust pipes, fuel tanks, etc.
Industrial field:
It is also used in some industrial equipment and mechanical parts that have certain requirements on material corrosion resistance and mechanical properties, such as parts of chemical equipment, structural parts in mechanical manufacturing, etc.

Stainless Steel Plate Standard Stock Sizes:

 
0.30mm x 1219 mm x Any length 
0.40mm x 1219 mm x Any length 
0.50mm x 1219 mm x Any length
0.60mm x 1219 mm x Any length
0.80mm x 1219 mm x Any length

Technical Parameters