430 Stainless Steel Sheet 2B Finish 0.5-3mm Thick 1260mm Wide

Product Specification

430 stainless steel sheet 2B finish 0.5-3mm thick 1260mm wide

product description

430 stainless steel sheet is a ferritic stainless steel material
Chemical composition:
Carbon (C) content ≤0.12%, which helps to improve the hardness of steel, but too high carbon content will reduce the toughness and corrosion resistance of steel.
Silicon (Si) content ≤0.75%, which can enhance the oxidation resistance and corrosion resistance of steel.
Manganese (Mn) content ≤1.00%, which can improve the strength and hardenability of steel.
Phosphorus (P) content ≤0.040%, sulfur (S) content ≤0.030%, phosphorus and sulfur are impurity elements in steel, the lower the content, the better the quality of steel.
Nickel (Ni) content ≤0.60% (can be included), nickel can improve the toughness and corrosion resistance of steel, but the content is low in 430 stainless steel.
Chromium (Cr) content is 16.00 - 18.00%, which is the main element of stainless steel with corrosion resistance. The higher the chromium content, the better the corrosion resistance.

Features:

Good corrosion resistance:
It has good corrosion resistance in general atmosphere, water and mildly corrosive media, and can resist corrosion in general atmosphere and various media, but its corrosion resistance in highly corrosive environments is not as good as some high-alloy stainless steels.

Good thermal conductivity:
It is worse than austenitic stainless steel, and its thermal expansion coefficient is smaller than that of austenite, which makes its size change relatively small during heating and cooling, and is suitable for some occasions that are sensitive to temperature changes.

Excellent thermal fatigue resistance:
The addition of stabilizing element titanium improves the mechanical properties of the weld and can withstand a certain degree of thermal cycling and stress changes.
It has a certain magnetic property and is strongly magnetic at room temperature.

Good processing performance:
Low work hardening rate, easy to bend and form, and can be made into products of different shapes and sizes through a variety of processing methods.

Poor weldability:
Appropriate process measures need to be taken during welding, and appropriate heat treatment is required before and after welding to ensure welding quality.

Relatively low cost:
No precious alloys such as nickel and molybdenum are added, which has cost advantages compared with some other stainless steels.

Uses:

Architectural decoration field:
It can be used to make curtain walls, roofs, balcony railings, etc. of buildings, which are both beautiful and can meet certain corrosion resistance and strength requirements.

Kitchen equipment:
Such as kitchen utensils, sinks, stoves, etc., because it has good corrosion resistance and easy processing, and the cost is relatively low.

Automotive industry:
It is used to manufacture some automotive parts, such as exhaust pipes, decorative strips, etc. In the automotive industry, 410S stainless steel sheets can meet certain strength and corrosion resistance requirements, and have good forming properties, which is convenient for manufacturing various complex shapes of parts.

Chemical equipment:
Because of its certain corrosion resistance, it can be used to manufacture some parts in chemical equipment, such as pipes, containers, etc.

Stainless Steel Plate Standard Stock Sizes:

 
1250 x 2438 mm 
1250 x 3000 mm 
1260 x 3000 mm
1260X1500 mm
1200X3000 mm
 

Technical Parameters