Qingdao Hengfengyou Electrical Engineering Co., Ltd.
| Supply Ability | 5000 pieces/year |
| Delivery Time | 15 DAYS |
| Packaging Details | wood |
| Usage | Power,Distribution Transformer |
| Phase | Three |
| Frequency | 50/60Hz |
| Type | Oil Immersed,Oil type,oil immersed current transformer 132kv |
| Product name | 33/10 Kv 50/60Hz 5000Kva Oil Immersed Power Distribution Transformer |
| Material | Copper+alumnium |
| Output voltage | 15kv 10 kv 0.4/0.69kv |
| Winding material | Cooper |
| Payment Terms | T/T |
| Brand Name | HENGFENGYOU |
| Model Number | S9.11,13 |
| Certification | ISO IEC CB COC KEMA SNI SABS CCC |
| Place of Origin | China |
View Detail Information
Explore similar products
3 Phase 10 KV Electrical Power Transformer For Distribution Network Center
S11 10 KV 100 KVA 500 KVA Oil Immersed Type Industrial Power Transformer ISO CE
10 KV 1000 KVA Electrical Power Transformer 3 Phase Oil Immersed Type Low Loss
Professional 1600 KVA Dry Cast Resin Transformer For Petrochemical Enterprise
Product Specification
| Supply Ability | 5000 pieces/year | Delivery Time | 15 DAYS |
| Packaging Details | wood | Usage | Power,Distribution Transformer |
| Phase | Three | Frequency | 50/60Hz |
| Type | Oil Immersed,Oil type,oil immersed current transformer 132kv | Product name | 33/10 Kv 50/60Hz 5000Kva Oil Immersed Power Distribution Transformer |
| Material | Copper+alumnium | Output voltage | 15kv 10 kv 0.4/0.69kv |
| Winding material | Cooper | Payment Terms | T/T |
| Brand Name | HENGFENGYOU | Model Number | S9.11,13 |
| Certification | ISO IEC CB COC KEMA SNI SABS CCC | Place of Origin | China |
| High Light | industrial power transformer ，power distribution transformer | ||
S11 Series Fully Sealed Type Transformer High Efficiency Oil Immersed Cooper Winding Material
11KV oil immersed transformer
Introduction to Products
The performances of model S9-M, S10-M, S11-M 10kv series full-sealed oil-immersed distribution transformes conform to Standards IEC. Its core is made of quality cold-rolled silicon sheet and is of a full-miter non-puncture structure and its oil is made of quality oxygen-free copper.
It adopts radiator oil tank of corrugated shteet type or expansion type. As it doesn't need oil conservator, the height of transformer is reduced, and as the transformer oil doesn't contract with air, the oil ageing is retarded, thus prolonging the service life of transformer. The no-load loss of Model S10-M is 20% lower than that of Model S9-M, and S11-M is 30% lower than S9-M.
· Service conditions
1. The maximum ambient air temperature shall not exceed 40 ℃, and the minimum shall not below - 25 ℃;
2. The altitude shall not exceed 1000m. If special customized transformers and low-voltage components are used, the altitude can reach 4000m;
3. The vertical inclination is no more than 5°, and no violent vibration and impact;
4. The air humidity is not more than 90% (+ 25 ℃);
5. No gas and conductive dust that will seriously affect the insulation of transformer, no explosion hazard and corrosion of electrical components;
6. Outdoor wind speed shall not exceed 35m / s.
7.If service conditions beyond the above, specially customized product is available.
· Structural features
1. The transformer core is made of folded import high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is bound to ensure the compactness and reduce noise.
2. The high and low voltage winding is made of oxygen-free copper,. The low voltage winding of 500KVA and below is of double-layer barrel structure, and of 630kVA and above is of double helix or four helix structure. The high-voltage winding normally adopts multi-layer barrels structure.
3. Dyn11 method is applied to the transformer connection to reduce the influence of harmonics on the power grid and improve the quality of power supply.
4. The transformer is a fully-sealed structure, which can extend its service life, free of core -lifting and maintenance.
5. The measured noise value is lower than the standard. After normal transportation, this series of transformers can be installed with relevant parts and components without core- lifting inspection, and can be put into operation after passing the acceptance test.
Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.
| Main Technical Parameters for 10KV level S9-M/S10-M/S11- M Series three-phase full-sealed non-excitaiton-tap-changing distribbution transformer | ||||||||||||
| Rated Power (kva) | High Voltage (kv) | H.V.Tap range | Low Voltage (kv) | Connection symbol | Short Circuit Impendence (%) | No-load loss(W) | On-load loss(W) | No load current (%) | ||||
| S9 | S10 | S11 | S9 | S10 | S11 | |||||||
| 30 | 6 6.3 10 10.5 11 | ±5% ±2x2.5% | 0.4 | Dyn11 Yyn0 | 4 | 130 | 110 | 100 | 600 | 600 | 600 | 2.1 |
| 50 | 170 | 150 | 130 | 870 | 870 | 870 | 2 | |||||
| 63 | 200 | 180 | 150 | 1040 | 1040 | 1040 | 1.9 | |||||
| 80 | 250 | 200 | 180 | 1250 | 1250 | 1250 | 1.8 | |||||
| 100 | 290 | 230 | 200 | 1500 | 1500 | 1500 | 1.6 | |||||
| 125 | 340 | 270 | 240 | 1800 | 1800 | 1800 | 1.5 | |||||
| 160 | 400 | 310 | 280 | 2200 | 2200 | 2200 | 1.4 | |||||
| 200 | 480 | 380 | 340 | 2600 | 2600 | 2600 | 1.2 | |||||
| 250 | 560 | 460 | 400 | 3050 | 3050 | 3050 | 1.2 | |||||
| 315 | 670 | 540 | 480 | 3650 | 3650 | 3650 | 1.1 | |||||
| 400 | 800 | 650 | 570 | 4300 | 4300 | 4300 | 1 | |||||
| 500 | 960 | 780 | 680 | 5150 | 5150 | 5150 | 1 | |||||
| 630 | 4.5 | 1200 | 920 | 810 | 6200 | 6200 | 6200 | 0.9 | ||||
| 800 | 1400 | 1120 | 980 | 7500 | 7500 | 7500 | 0.8 | |||||
| 1000 | 1700 | 1320 | 1150 | 10300 | 10300 | 10300 | 0.7 | |||||
| 1250 | 1950 | 1560 | 1360 | 12000 | 12000 | 12000 | 0.6 | |||||
| 1600 | 2400 | 1880 | 1640 | 14500 | 14500 | 14500 | 0.6 | |||||
| 2000 | 5 | 2830 | 2270 | 1940 | 17140 | 17140 | 17140 | 0.6 | ||||
| 2500 | 3350 | 2690 | 2300 | 20260 | 20260 | 20260 | 0.5 | |||||
· Order instructions:
1. The customer needs provide main parameters of the transformer (input and output voltage, capacity, loss, etc.)
2. Other customer requirements
Workshop pictures:
Package Details:
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
3000-5000
Employee Number:
100~200
Ecer Certification：
Active Member
Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product... Qingdao Hengfengyou Electrical Engineering Co., LTD., subordinate to Hengfengshuai Group, is an export-oriented enterprise with transmission and distribution industry as its main business, integrating product research and development, manufacturing and trade. Its main product...
Get in touch with us
Leave a Message, we will call you back quickly!