Remote Control Wireless Electric Hoist Low Headroom 1 Ton Electric Chain Hoists

The KOEO EQ01-01 YS is a wireless remote control 1 ton single phase electric chain hoist that combines the convenience of 220V plug-and-play power with cable-free operation for enhanced safety and flexibility. Featuring an industrial-grade 433 MHz wireless remote system with up to 100 meters of operational range, a 1.8 kW IP55 enclosed single phase motor, G80 alloy steel load chain, and low headroom compact design, the EQ01-01 YS allows operators to control lifting from the safest vantage point without being tethered to the suspended load. The dual-mode control system includes both wireless remote and wired 36V pendant backup, ensuring uninterrupted operation in all conditions. This hoist is the ideal single phase solution for auto repair shops, fabrication facilities, and warehouse operations where operator mobility enhances both safety and productivity.

• Wireless Remote Control with 100m Range: The industrial-grade 433 MHz wireless remote provides reliable cable-free control with a transmission range of up to 100 meters in open areas. Operators can position themselves at the optimal safety distance with clear visibility of the suspended load, eliminating the hazards of operating directly beneath a raised load.
• Dual-Mode Control System: The EQ01-01 YS includes both the wireless remote transmitter and a wired 36V pendant backup controller. If wireless signal is temporarily unavailable due to interference or battery depletion, operators can immediately switch to the wired pendant, ensuring zero operational downtime.
• 1.5 kW Single Phase IP55 Motor: The 1.1 kW motor delivers 5.2 m/min lifting speed at 50Hz on standard 220V single phase power. IP55-rated protection against dust and water jets with Class F insulation ensures reliable performance in dusty automotive workshops and fabrication environments.
• G80 Alloy Steel Load Chain: Premium 7.1 mm G80 calibrated alloy steel chain with 4:1 safety factor provides smooth, quiet lifting. Heat-treated for maximum tensile strength and wear resistance, the chain delivers consistent performance through thousands of lifting cycles in busy workshop environments.
• Enhanced Operator Safety: The wireless remote enables operators to maintain distance from suspended loads, reducing the risk of injury from shifting loads or falling objects. This is particularly valuable in auto repair shops where engine and transmission pulls require operators to guide loads from below while controlling the hoist.
• Low Headroom Compact Body: The space-optimized design maximizes usable lift height in workshops with standard ceiling heights, making it ideal for garage bay installations where every centimeter of lift height matters during engine removal operations.
• Ergonomic Wireless Transmitter: The lightweight handheld transmitter features a lanyard loop for neck-worn operation, large clearly labeled buttons for gloved-hand use, and an LED status indicator for battery level and signal strength. Two AAA batteries provide months of daily operation before replacement.

The EQ01-01 YS wireless remote single phase electric chain hoist is purpose-designed for automotive repair shops performing engine and transmission pulls where operator positioning flexibility is critical, fabrication shops handling large steel workpieces, warehouse operations with high shelving where visibility from directly below is obstructed, agricultural equipment repair facilities, and any workshop environment where cable-free operation enhances both operator safety and productivity. The wireless control eliminates trip hazards from pendant cables while enabling the operator to maintain direct visual contact with the load from any angle.

Each EQ01-01 YS hoist is packed in a KOEO-branded reinforced plywood case with high-density foam padding, moisture-proof VCI wrapping, and silica gel desiccant packs. The wireless remote transmitter is separately packed in a protective foam insert within the main case. Export-grade outer carton with steel banding ensures secure transit. Every unit undergoes 100 percent factory load testing at 1.25 times rated capacity (1.25 tons) with wireless remote function verification across the full 100-meter range. CE certified compliant with EU Machinery Directive 2006/42/EC and RED Directive 2014/53/EU for radio equipment. Manufactured under ISO 9001:2015 quality management systems. G80 chain certified to EN 818-7. Standard delivery within 5 to 7 working days for stock, 15 to 20 days for production orders.