Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 50 sets/month |
| Delivery Time | 15 working days |
| Packaging Details | carton |
| Standard Comliant | IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2 |
| Configuration | hardened steel pin, test bench |
| Pin size | 40°Conical sharp+0.25mm radius |
| Control component | PLC+touch screen |
| Warranty | 12 months |
| Working Power | 220V/50Hz |
| Brand Name | Pego Group |
| Model Number | PG-9583 |
| Certification | Third-Lab Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 50 sets/month |
| Delivery Time | 15 working days | Packaging Details | carton |
| Standard Comliant | IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2 | Configuration | hardened steel pin, test bench |
| Pin size | 40°Conical sharp+0.25mm radius | Control component | PLC+touch screen |
| Warranty | 12 months | Working Power | 220V/50Hz |
| Brand Name | Pego Group | Model Number | PG-9583 |
| Certification | Third-Lab Calibration Certificate | Place of Origin | China |
| High Light | PLC Automatic Abrasion Resistance Tester ，Hardened Steel Abrasion Resistance Tester ，Scratch Pin Abrasion Resistance Test Equipment | ||
Automatic Abrasion Resistance Tester with Radius 0.25mm Scratch Pin
1. Application
The abrasion resistance tester is applied for Scratch testing on solid insulating accessible parts or printed boards used in household appliances and similar products to ensure that the material has sufficient strength not to be pierced by sharp tools.
2. Introduction
Abrasion resistance tester is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements.
The scratch resistance test uses a hardened steel pin for scratching. The end of the steel pin should be tapered with a apex angle of 40°. The tip should be rounded with radius of 0.25 mm ± 0.02 mm.
When performing the scratch test, the test pin is held at 80-85° to the horizontal, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a plane perpendicular to the edge of the conductor. The steel pin should be properly loaded so that the hardened steel pin can apply a force of 10N ± 0.5N along its axial direction. The scratch interval should be at least 5mm and at least 5mm away from the edge of the sample.
This equipment adopts the control system of PLC+ touch screen, and the performance is stable. Rotating the work surface makes it easy to realize the scratch test in both directions.
3. Specification
| Scratching speed | 0~25mm/s (adjustable) |
| Test times | 0~9999 times (adjustable) |
| Scratching spacing | 0~50mm (adjustable) |
| Working table | 3600 rotation |
| Scratch angle | 80-850 (the pin is fixed by clamp) |
| Force applied | 10N±0.5N (option: 30N±0.5N equip with 20N weights) |
| Scratching pin | Rounded with a radius of 0.25 mm ± 0.02 mm |
| Pin Tip | 40°Conical sharp |
| Material of the pin | Hardened steel |
| Working power | 220V/50Hz |
| Control system | PLC+touch screen |
| Drive mode | Stepping motor |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!