Pego Electronics (Yi Chun) Company Limited
| Payment Terms | T/T |
| Supply Ability | 100 sets/months |
| Delivery Time | 3-7 working days |
| Packaging Details | carton |
| Application | for testing AC / DC voltage, current, power, power factor, frequency, harmonic |
| Voltage Test Range | 0-600V (AC/DC) |
| Current Test Range | 0-20A (AC/DC) |
| Power Factor Test Range | -1.000～1.000 |
| Frenquency Test Range | 5KHz |
| Input | AC100V ~ 240V, 50Hz/60Hz |
| Brand Name | Pego Electronics |
| Model Number | HP510 |
| Certification | CANAS Calibration Certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60332-1 Single Wire Flammability Test Apparatus 45 Degree Burner Angle
Manual Electrical Safety Test Equipment Stainless Steel Inclined Plane Device
Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment
1.1m Length Luminaire / Short Circuit Test Chain 63%Cu 37%Zn Material IEC60598-1
Product Specification
| Payment Terms | T/T | Supply Ability | 100 sets/months |
| Delivery Time | 3-7 working days | Packaging Details | carton |
| Application | for testing AC / DC voltage, current, power, power factor, frequency, harmonic | Voltage Test Range | 0-600V (AC/DC) |
| Current Test Range | 0-20A (AC/DC) | Power Factor Test Range | -1.000～1.000 |
| Frenquency Test Range | 5KHz | Input | AC100V ~ 240V, 50Hz/60Hz |
| Brand Name | Pego Electronics | Model Number | HP510 |
| Certification | CANAS Calibration Certificate | Place of Origin | China |
| High Light | 600V Voltage Test Range Digital Power Meter ，20A Current Test Range Electrical Parameter Measuring Instrument ，5KHz Frequency Test Range Multifunctional Power Analyzer | ||
HP - 510 is a multifunctional digital power meter for measuring the power of single - phase (1P/2W) AC and DC power supplies. The test frequency range of this product can reach DC 0.5Hz - 100kHz. It uses a 5" IPS LCD display screen, has a 5 - digit measurement display, enables simultaneous measurement of multiple parameters, and possesses high - precision measurement capability. At the same time, it has functions such as waveform display (voltage/current/power), integral measurement function, measurement and analysis of each harmonic (measurement at 50/60Hz meets the requirements of IEC61000 - 4 - 7), external sensor input terminals, and various communication interfaces to assist users in achieving clear, convenient and accurate power measurement.
|
Model |
HP510 |
||
|
AC/DC Voltage |
600Vrms MAX |
||
|
AC/DC Current |
20Arms MAX |
||
|
Power Factor |
-1.000～1.000 |
||
|
Test Accuracy |
±(0.1% of Reading + 0.2% of Range), 0.2 Level |
||
|
Input Bandwidth |
DC, 0.5Hz～ 100KH |
||
|
Power Filter |
OFF, 500Hz, 5KHz |
||
|
Frequency Filter |
OFF, 500Hz, 5KHz |
||
|
Integration Mode |
Manual Integration Mode, Standard Integration Mode or Repeated Integration Mode. |
||
|
Integration time |
0 hours 00 minutes 00 seconds ~ 9999 hours 59 minutes 59 seconds |
||
|
Accuracy |
± (power accuracy (or current accuracy) + 0.1% reading) (fixed gear) |
||
|
Range setting |
Auto range or fixed range |
||
|
Measurement mode |
0.2 seconds/time |
||
|
Working power supply |
AC100V ~ 240V, 50Hz/60Hz |
||
|
Storage conditions |
Temperature: -40 ~ 70℃ |
||
|
Humidity |
<90%RH (no condensation) |
||
|
Operating environment |
temperature 0 ~ 40℃, relative humidity <70%RH (no condensation); For indoor use only, altitude <2000 meters. |
||
|
Dimension |
W214mm*D320.5mm*H120.5mm |
||
|
Input indicators |
|||
|
Item |
Voltage |
Current |
|
|
Input type |
Floating input via resistor divider |
Direct input or sensor input |
|
|
Input impedance |
Approx. 2MΩ |
Direct input:: Approx. 500mΩ (200mA and below range) Approx. 50mΩ (0.5A and above range) Sensor input: about 100KΩ |
|
|
Measurement range (RMS) |
15V, 30V, 60V, 150V, 300V, 600V |
Direct input: 5mA, 10mA, 20mA, 50mA, 100mA, 200mA, 0.5A, 1A, 2A, 5A, 10A, 20A Sensor input: 50mV, 100mV, 200mV, 500mV, 1V, 2V, 5V, 10V |
|
|
Maximum continuous input |
1.5kV Peak or 1kV RMS, whichever is smaller |
30A Peak or 20A RMS, whichever is smaller (200mA and below) 100A Peak or 30A RMS, whichever is smaller (0.5A and above) |
|
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!