China factories

China factory - Pego Electronics (Yi Chun) Company Limited

Pego Electronics (Yi Chun) Company Limited

  • China,Yichun ,Jiangxi
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress
China IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress

  1. China IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress
  2. China IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress

  1. MOQ: 1 set
  2. Price: Negotiation
  3. Get Latest Price
Payment Terms T/T,PayPal
Delivery Time 20 business days
Packaging Details woodencase
Reference standard IEC60529, IEC61851, IEC62196-1
Configuration spray nozzle, control chamber
Material of nozzle brass
Application for testing household appliance, luminaire, auto parts and charging station
Working power 220V/50Hz
Brand Name Pego Electronics
Model Number IPX34AS
Certification Third-Lab Calibration Certificate
Place of Origin China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms T/T,PayPal Delivery Time 20 business days
Packaging Details woodencase Reference standard IEC60529, IEC61851, IEC62196-1
Configuration spray nozzle, control chamber Material of nozzle brass
Application for testing household appliance, luminaire, auto parts and charging station Working power 220V/50Hz
Brand Name Pego Electronics Model Number IPX34AS
Certification Third-Lab Calibration Certificate Place of Origin China
High Light IEC60529 Waterproof TesterIPX3 Waterproof TesterIPX4 Waterproof Tester

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester

1. Introduction

The ipx34 spray nozzle waterproof tester is designed and manufactured according to IEC60529 clause 14.2.3 and clause 14.2.45 figure 5, IEC60598-1, GB4208, GB7000.1, GB17761 standards. It is suitable for waterproof testing of outdoor electrical and electronic products in terms of rain and water spray, and for waterproof testing of products by certification and testing agencies and manufacturers. The shower is mainly composed of a brass nozzle, a movable water baffle, a counterweight, a pressure gauge and a stainless steel valve. The equipment is consisted by spray nozzle, water tank and control box.

2. Standard

IEC60529 Degrees of protection provided by enclosures (IP Code) Figure 5

IEC60598-1 Luminaires - Part 1: General requirements and tests

ISO20653 Road Vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access

 

3. Parameters

Model

IPX34AS

Outer size (L*W*H)

870mm*600mm*950mm (control box)

370mm*115mm*165mm (spray nozzle)

Spray nozzle diameter

102mm

Number of holes

121

Hole diameter

Φ0.5mm

Holes position

1 hole at center

2 inner circles of 12 holes at 300 pitch

4 outer circles of 24 holes at 150pitch

Outer diameter of water inlet

Φ16mm

Outer diameter of water pipe

Φ28mm

Flow rate

10L/min±5%

Flowmeter adjustment method

Manual adjustment  

Water pressure range

50-150Kpa

Flowmeter display

Glass flow meter

Capacity of water tank

150L

Working power

220V/50Hz

Water source

1. The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2. The faucet is not more than 2 meters away from the equipment

Requirement for the site

The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set

 

4. Figure:

 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler,Exporter,Trading Company

  • Year Established:

    2014

  • Ecer Certification:

    Verified Supplier

Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...

+ Read More

Get in touch with us

  • Reach Us
  • Pego Electronics (Yi Chun) Company Limited
  • No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
  • https://www.electricalsafety-testequipment.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement