Electrical Training Equipment Providing Interactive Modules and Real Time

The training content of this device covers training projects of courses such as "Circuit and Magnetic Circuit","Electronics" and "Electrical Engineering".It has a reasonable structure and the training components are in hanging box type, which makes it easy to add or expand training projects.

This training platform is mainly composed of Training screen,training box,training table,etc.

The training screen is an iron double-layer matte dense spray structure with a steel panel. It provides AC power, DC regulated power supply, function signal generator,test instruments and training devices for the training box. The specific functions are as follows:

1. Provide three-phase 380V AC power supply (isolation transformer output), the output is independently controlled by the switch, and the output has a short-circuit protection function.
2. Three-phase multifunctional power meter It can test the voltage, current, active power, reactive power, power factor, etc. of single-phase and three-phase power loads. The measurement range is voltage 0-450V and current 0-5A. It can measure the active power and power factor of the load.
3. Multi-level AC and DC voltage and current meters Provide one multi-level AC 0-500V digital voltage meter,one AC 0-5A digital current meter,one DC 0-500V digital voltage meter, and one DC 0-5A digital current meter.
4. High-power load unit Provide 0-900Ω/150W disk adjustable resistor.
5. Provide one function signal generator: Use direct digital frequency synthesis (DDS) to generate high-precision sine waves, square waves and triangle waves. Use a large-screen LCD to display the output frequency, waveform, and attenuation value.
6. Provide a set of ±5V, ±12V DC regulated power supplies.
7. Provide a set of 100Ω-1KΩ/2W adjustable resistance loads, a set of 1KΩ-10KΩ/2W adjustable resistance loads, and a 0-100KΩ adjustable resistor.
8. Provide 1 set of AC low-voltage power supply: Provide 1 set of AC power supply with 6V-0-6V and 12V low-voltage output.

• Exp 1: Magnetization Characteristics
• Exp 2: Speed Control of DC Shunt Motor
• Exp 3: Swinburne’s Test
• Exp 4: Brake Test on DC Shunt Motor
• Exp 5: OC & SC Tests on 1-Phase Transformer
• Exp 6: Brake Test on 3-Phase IM
• Exp 7: Regulation of Alternator
• Exp 8: PN Junction Diode
• Exp 9: Zener Diode
• Exp 10: Half-Wave Rectifier
• Exp 11: Full-Wave Rectifier
• Exp 12: CB Characteristics
• Exp 13: CE Characteristic

1. Modular design, flexible expansion The equipment adopts a hanging box structure: all training modules (magnetic circuit,electromagnetism,transformer,motor,etc.)adopt independent hanging box design,which is convenient for addition,subtraction or replacement to meet the needs of different courses (such as circuits,electronics,and electrical engineering).
2. High-precision, multi-function power supply and measurement system
   • Full digital display:multi-speed AC/DC voltage/current meter (AC/DC 0-500V, 0-5A), three-phase power meter (voltage/current/power/power factor measurement), accurate and intuitive data.
   • DDS function signal generator: direct digital frequency synthesis technology, output high-precision sine wave,square wave,triangle wave,support large-screen LCD real-time display of frequency and waveform.
   • Multi-type power output: isolated three-phase 380V power supply (with short-circuit protection), ±5V/±12V DC regulated power supply,6V-12V AC low-voltage power supply,to meet diverse experimental needs.
3. Safe and reliable,protective design The training screen adopts iron double-layer spray-coated structure,which is anti-corrosion and anti-interference;the power output end is equipped with short-circuit protection to ensure safe operation.
4. Humanized details to improve efficiency Equipped with quick connection system:standard double-loop sheathed connection line (3mm/4mm interface),anti-falling,easy to plug and unplug, reducing line clutter.