Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd.
| Certifiion | ISO |
| Payment Terms | Western Union,T/T,D/P,D/A,L/C |
| Supply Ability | 100 |
| Delivery Time | 2 weeks |
| Packaging Details | wooden box |
| Condition | New |
| Usage | Hydraulic Piston Pump |
| Certifisaarion | ISO9001 |
| Displacement | 10 to 250 cc/rev |
| Operatingtemperaturerange | -20°C to 80°C |
| Sealtype | NBR or FKM Seals |
| Pressurerating | Up to 350 bar |
| Type | Hydraulic Pump |
| Brand Name | Rexroth |
| Model Number | A2VK55MAGR1G1PE1-SO2 A2VK28MAOR1G1PE2-SO2 A2VK12MARL4G0PE1-SO2 |
| Place of Origin | German |
View Detail Information
Explore similar products
German Rexroth Industrial High-Pressure Hydraulic Gear Pump 280 Bar with
Rexroth A4VSO180 Piston Pump 3000 rpm High Pressure for Hydraulics
A10VO71DFRI/31R-PSC64K02-S0225 A10VSO71FR1/31R-PPA12N00 Hydraulic Piston Pump
Rexroth A10VSO Hydraulic Piston Pump 280 Bar High Pressure
Product Specification
| Certifiion | ISO | Payment Terms | Western Union,T/T,D/P,D/A,L/C |
| Supply Ability | 100 | Delivery Time | 2 weeks |
| Packaging Details | wooden box | Condition | New |
| Usage | Hydraulic Piston Pump | Certifisaarion | ISO9001 |
| Displacement | 10 to 250 cc/rev | Operatingtemperaturerange | -20°C to 80°C |
| Sealtype | NBR or FKM Seals | Pressurerating | Up to 350 bar |
| Type | Hydraulic Pump | Brand Name | Rexroth |
| Model Number | A2VK55MAGR1G1PE1-SO2 A2VK28MAOR1G1PE2-SO2 A2VK12MARL4G0PE1-SO2 | Place of Origin | German |
| High Light | Rexroth variable displacement piston pump ，German Rexroth metering pump ，A2VK series gear pump | ||
A2VK55MAGR1G1PE1-SO2 | A2VK28MAOR1G1PE2-SO2 | A2VK12MARL4G0PE1-SO2
The Rexroth A2VK series axial piston variable metering pumps are high-performance hydraulic metering products specifically designed for precision appliions including polyurethane foaming, chemical metering, and high-pressure fluid transfer. Featuring swashplate variable displacement design with high metering accuracy, wide flow adjustment range, and high working pressure, these pumps are widely used in injection molding machinery, chemical equipment, construction machinery, and other industrial fields.
| Parameter | A2VK55MAGR1G1PE1-SO2 | A2VK28MAOR1G1PE2-SO2 | A2VK12MARL4G0PE1-SO2 |
|---|---|---|---|
| Series | A2VK | A2VK | A2VK |
| Theoretical Displacement | 55 mL/r | 28 mL/r | 12 mL/r |
| Rotation Direction | Right-hand | Right-hand | Left-hand |
| Control Type | Manual (with handwheel) | Manual (with handwheel) | Manual (with handwheel) |
| Rated Pressure | 250 bar | 250 bar | 250 bar |
| Peak Pressure | 315 bar | 315 bar | 315 bar |
| Mounting Flange | SAE standard | SAE standard | SAE standard |
| Seal Material | NBR/FKM optional | NBR/FKM optional | NBR/FKM optional |
| Suitable Media | Polyurethane components, hydraulic oil | Polyurethane components, hydraulic oil | Polyurethane components, hydraulic oil |
| Typical Speed | 735-1800 rpm | 735-1800 rpm | 735-1800 rpm |
Answer: Pump rotation direction (right-hand R or left-hand L) should match the drive motor rotation. When viewed from the drive end, clockwise motor rotation requires right-hand pump, counterclockwise requires left-hand pump. Incorrect selection may cause pump failure or damage. Confirm motor rotation direction during selection.
Answer: Before first start, fill the pump casing with clean hydraulic oil to the middle of oil level gauge, manually rotate the pump shaft several times to ensure oil filling. Run without load for 5-10 minutes, check for abnormal noise or leakage. If air is present, loosen vent screw or open fill port to release air. After first run, recommend changing hydraulic oil once to remove initial wear particles.
Answer: First check if handwheel adjustment mechanism is stuck, try rotating handwheel back and forth several times. If still not adjustable, possible causes include: internal mechanism blockage, control piston wear, spring failure, etc. Contact technical personnel for inspection. Keep adjustment mechanism clean and lubrie regularly.
Answer: Common causes: ① Air leakage or blockage in suction line causing cavitation; ② Low oil level or high viscosity; ③ Misalignment between pump and motor; ④ Internal component wear (port plate, pistons, etc.). Check external factors first (oil level, lines, coupling), if problem persists, inspect internal wear.
Answer: Excessive leakage may be caused by: ① Shaft seal wear or damage (replace seal); ② Wear between port plate and cylinder block (grind or replace); ③ Excessive clearance between piston and cylinder bore (replace piston assembly). Regularly check leakage, if significantly increased, stop and inspect to prevent pump damage due to oil shortage.
For ordering or detailed technical documents, please contact local Rexroth authorized distributor or Rexroth sales representative. Provide complete model number, quantity, delivery requirements, and we will provide professional technical support and quotation.
Disclaimer: This product information is based on Rexroth official technical data. Product specifiions are subject to change without notice. Confirm product parameters meet your system requirements before appliion. Rexroth reserves final interpretation rights.
Release Date: January 2026 | Publisher: Rexroth (China) Co., Ltd.
Company Details
Business Type:
Manufacturer,Exporter
Total Annual:
1 million-10 millon
Employee Number:
>50
Ecer Certification：
Verified Supplier
Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd. has been established for many years and has now developed into an international trading company supplying various hydraulic machinery parts, oil pumps and valves. We are one of the few Chinese companies with multiple products and cha... Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd. has been established for many years and has now developed into an international trading company supplying various hydraulic machinery parts, oil pumps and valves. We are one of the few Chinese companies with multiple products and cha...
Get in touch with us
Leave a Message, we will call you back quickly!