China factories

Chat Now Send Email
China factory - Nanjing Inste Automation Co., Ltd.

Nanjing Inste Automation Co., Ltd.

  • China,Nanjing ,Jiangsu
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Safety Electromagnetic Flow Meter 20mA PTFE PFA F46 Liner Material DN200-DN400
China Safety Electromagnetic Flow Meter 20mA PTFE PFA F46 Liner Material DN200-DN400

  1. China Safety Electromagnetic Flow Meter 20mA PTFE PFA F46 Liner Material DN200-DN400

Safety Electromagnetic Flow Meter 20mA PTFE PFA F46 Liner Material DN200-DN400

  1. MOQ: 1 set
  2. Price: USD200-800/ set
  3. Get Latest Price
Payment Terms T/T,Western Union
Supply Ability 100 sets per day
Delivery Time 2-3 word days
Packaging Details wooden package
Caliber DN200-400mm
Power Supply AC220V,DC24V, 3.6V
Display Instantaneous flow, total flow, flow velocity
Structure Type Integrate or Remote
Pressure 0.6Mpa-10Mpa
Accuracy ±0.5% of reading
Fluid Temperature -20°C~120°C
Ambient Temperature -20℃~60℃
Environment Temperature -10℃~+60℃
Output 4-20mA
Communication RS485 MODBUS RTU, HART, GPRS
Electrode SS316L, Hastelloy B, Hastelloy C, Titannium, Tantanlum, Platinum-iridium
Flange Standard DIN, ANSI, JIS
Brand Name INSTE
Model Number ISTLDG
Place of Origin Jiangsu, China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Payment Terms T/T,Western Union Supply Ability 100 sets per day
Delivery Time 2-3 word days Packaging Details wooden package
Caliber DN200-400mm Power Supply AC220V,DC24V, 3.6V
Display Instantaneous flow, total flow, flow velocity Structure Type Integrate or Remote
Pressure 0.6Mpa-10Mpa Accuracy ±0.5% of reading
Fluid Temperature -20°C~120°C Ambient Temperature -20℃~60℃
Environment Temperature -10℃~+60℃ Output 4-20mA
Communication RS485 MODBUS RTU, HART, GPRS Electrode SS316L, Hastelloy B, Hastelloy C, Titannium, Tantanlum, Platinum-iridium
Flange Standard DIN, ANSI, JIS Brand Name INSTE
Model Number ISTLDG Place of Origin Jiangsu, China
High Light PTFE Lined Electromagnetic Flowmeter Electromagnetic Flow Meter 20mA DN400 EMF Flow Meter
Safety Electromagnetic Flow Meter 20mA PTFE PFA F46 Liner Material DN200-DN400 EMF Flow Meter
Product Overview

Safety Electromagnetic Flow Meter 20mA with PTFE/PFA/F46 Liner Material for DN200-DN400 pipe sizes. Designed for reliable flow measurement in industrial applications.

Common Problems and Solutions
  1. Flow Reading Fluctuates/Jumps (Most Common)
    Causes: Air bubbles in the pipe, insufficient pipe filling, poor grounding, electromagnetic interference
    • Air removal: Install at the low point of the pipeline or add an exhaust valve upstream
    • Full pipe: Install horizontally with electrodes on the side to avoid air accumulation at the top; install vertically with fluid flowing upward
    • Grounding: Use a dedicated ground wire with resistance <10Ω; install grounding rings for plastic/insulated pipes
    • Anti-interference: Route signal cables away from power cables and ground the shielding layer at one end only
  2. No Flow Reading/Zero Display
    Causes: Empty pipe, reversed wiring, excitation/electrode failure, incorrect parameters
    • Ensure the pipeline is fully filled with no negative pressure
    • Check for reversed excitation and signal wires
    • Verify parameters such as meter diameter, measuring range, and units
    • Measure excitation coil resistance (normal: 80-150Ω)
  3. Inaccurate Measurement (Over/Under Reading)
    Causes: Electrode fouling, damaged liner, insufficient straight pipe length, zero drift
    • Clean electrodes: Use a soft brush or dilute hydrochloric acid to remove insulating deposits
    • Inspect liner: Check for wear, bulges, or cracks
    • Straight pipe requirements: Upstream ≥10D, downstream ≥5D (D = pipe diameter)
    • Zero calibration: Perform zero calibration when the pipe is full and static
  4. Zero Drift/Negative Reading with Flow
    Causes: Poor grounding, contaminated electrodes, low medium conductivity, interference
    • Re-establish reliable grounding to ensure equipotential connection
    • Clean electrodes and check insulation
    • Confirm medium conductivity >5μS/cm
    • Keep away from strong interference sources such as inverters and motors
Routine Maintenance (Preventive Measures)
  • Clean electrodes regularly to prevent fouling coverage
  • Maintain full pipe condition with no air bubbles or negative pressure
  • Ensure reliable grounding, separate from motor/pipe grounding
  • Route signal and power cables separately
  • Perform zero calibration regularly (every 3-6 months)
Safety Electromagnetic Flow Meter installation and components diagram

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2015

  • Total Annual:

    10000000-20000000

  • Employee Number:

    100~120

  • Ecer Certification:

    Verified Supplier

Established in 2016, INSTE is a leading manufacturer of high-quality industrial instruments, specializing in  pressure gauges, flow meters, temperature sensors, control valves, etc. With decades of expertise, we are committed to delivering reliable, accurate, and durable solutions for industrie... Established in 2016, INSTE is a leading manufacturer of high-quality industrial instruments, specializing in  pressure gauges, flow meters, temperature sensors, control valves, etc. With decades of expertise, we are committed to delivering reliable, accurate, and durable solutions for industrie...

+ Read More

Get in touch with us

  • Reach Us
  • Nanjing Inste Automation Co., Ltd.
  • East Mozhou Road , Nanjing ,Jiangsu , China
  • https://www.electromagneticflow-meter.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement