Godson Technology Co., Ltd
| Payment Terms | T/T |
| Model | GS-CU01 |
| Power | 3W |
| Duration Time | 1.5 Hours |
| Voltage | AC85-265V-50/60Hz |
| Lanp Luminous Flux | 300Lm |
| Operating Temperature | 0-40 ℃ |
| Brand Name | Godson or OEM |
| Model Number | Emergency LED Exit Light GS-CU01 |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
Non Maintained Emergency LED Downlight White 2W 130mm DGS32A
LiFePO4 3.2V 1.5 Ah Emergency Exit Light White 4W EGS4DLiA Duration Time 3 Hours
White 4 Watt EGS4DLiA Trad Exit Emergency Light 50lm 6500k
Emergency Recessed Blade LED Downlight White 4W 40lm EGS4MRB
Product Specification
| Payment Terms | T/T | Model | GS-CU01 |
| Power | 3W | Duration Time | 1.5 Hours |
| Voltage | AC85-265V-50/60Hz | Lanp Luminous Flux | 300Lm |
| Operating Temperature | 0-40 ℃ | Brand Name | Godson or OEM |
| Model Number | Emergency LED Exit Light GS-CU01 | Place of Origin | Guangdong, China (Mainland) |
| High Light | Outdoor Emergency LED Exit Light ，Emergency LED Exit Light 3W ，Emergency LED Exit Light 6500K | ||
Outdoor Emergency LED Exit Light White 3W 6500K Battery Powered
Technical Specifications
|
Model
|
GS-CU01
|
|
Size
|
350*25*145mm
|
|
Power
|
3W
|
|
Voltage
|
AC85-265V-50/60Hz
|
|
Emergency time
|
≥ 1.5h
|
|
Battery
|
lithium battery
/Ni-CD/Ni-MH
|
|
CCT
|
6500 K
|
|
Lanp Luminous Flux
|
300Lm
|
| Operating Temperature | 0-40 ℃ |
Monthly Testing
This only requires a short test to check that everything is working properly. Use the test key to ensure that all emergency lights are on when the mains power is off and check the enclosures to ensure they are clean and show no signs of damage. Once mains power is restored, check that they are fully charged again.
Also most emergency lights or exit signs have a small "test" button somewhere in the housing. You can press and hold this button for thirty seconds to test the bulb and battery. This method works fine if you have a small number of devices that can be easily accessed. The light should come on and stay at the same brightness level for a full 30 seconds. If the lights dim immediately, or if some bulbs do not work, then you should contact us to replace the bulbs or batteries in the fixture.
Why thirty seconds?
Many defective batteries only hold enough charge to fully light the bulb for a few seconds, but they lose power quickly. If you don't test for 30 seconds, you may find lights that work every month only to find that they go out within seconds of when you really need them. By testing the lights for at least 30 seconds, you can ensure that the batteries have more than just this type of "surface charge".
Annual Testing
Locate the circuit breaker or fuse that supplies power to the emergency light or exit sign. (If they are not properly marked, you may need to contact an electrician.) Turn off the circuit breakers and observe the lights to determine if they are working properly during the three-hour test period.
Why three hours?
It is important to test emergency lights annually for their full rated duration. Emergency lights should provide a minimum of 3 hours of illumination (which is usually the case), so they need to be tested for the full 3 hours to ensure they are still working at the end of the test.
What Are Maintained Emergency Lights Types?
Maintained lights are illuminated all the time (24/7) for safety. This means that they switch to a battery-powered emergency output. Even if the power fails, the light will remain on.
This safety light is most commonly an LED, and it should illuminate an exit path and should be easily seen should there be a fire to provide the occupant's safety.
An emergency lighting system in continuous use is called a maintained system. These lighting systems typically remain illuminated 24/7, and each light has dual purposes - one as a regular emergency lamp and another as an emergency light. Maintained lighting systems are often used as escape route lighting and found in buildings such as hospitals or police stations.
What Are Non-Maintained Emergency Lights?
Non-maintained lights usually are not illuminated and will only turn on (illuminate) when the power fails. - The batteries are constantly being charged while ever there is power to the fitting. Power can be cut to a building in the event of a fire. Fire safety security alarm systems can control signs and luminaires. These fire safety systems require appropriate training, building signs and appropriate lighting.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Ecer Certification：
Verified Supplier
Godson Technology Co., Ltd. is a globally trusted supplier and manufacturer of emergency lighting battery, emergency lighting products, E-bike battery and power tool battery, whose batteries range covers Ni-Cd, Ni-MH, LiFePO4, Lead Acid, Lion-polymer and other relevant lithium batteries.... Godson Technology Co., Ltd. is a globally trusted supplier and manufacturer of emergency lighting battery, emergency lighting products, E-bike battery and power tool battery, whose batteries range covers Ni-Cd, Ni-MH, LiFePO4, Lead Acid, Lion-polymer and other relevant lithium batteries....
Get in touch with us
Leave a Message, we will call you back quickly!