TIANON51.2V 314Ah 16.08kWh Outdoor IP65 LiFePO4 Battery C5 Anti-Corrosion Fire

The C001-2 is the mid-range powerhouse of the TIANON C001 outdoor ESS series, delivering 16.08kWh of rated energy at the industry-standard 51.2V configuration. Designed as the ideal balance between capacity and footprint, the C001-2 houses 314Ah Grade A LiFePO4 cells in a robust 505×170×960mm floor-standing IP65 cabinet weighing 130kg. With full C5-Ready anti-corrosion engineering, integrated aerosol fire suppression, 10.24kW continuous power output, and 8,000-cycle longevity, it is the go-to solution for whole-house residential solar backup, off-grid villas, and light commercial energy management in challenging outdoor environments.

• 16.08kWh rated energy capacity - 314Ah Grade A LiFePO4 cells in 51.2V 16S configuration delivering 16.08kWh for whole-house autonomy, powering full household loads through extended outages without capacity anxiety.
• IP65 outdoor-grade enclosure - completely dustproof and waterproof construction enables year-round outdoor deployment without a dedicated utility room, reducing total system installation cost significantly.
• C5-Ready anti-corrosion protection - outdoor-grade polyester powder coating with fine-textured matte finish resists UV degradation, salt spray, and industrial pollutants with ePTFE breathable vent and conformal coating on all PCBs.
• Integrated aerosol fire suppression - standard condensed aerosol fire suppression module provides autonomous thermal runaway defense operating independently from the BMS for maximum residential safety with zero external power required.
• Grade A 314Ah LiFePO4 cells - 100% brand new Tier 1 cells with QR-code traceability, full batch documentation, and Zero Fake Capacity guarantee for verified rated energy throughout the entire service life.
• 8,000+ cycles at 25°C - laboratory-verified cycle life exceeding 8,000 cycles at 80% DOD, delivering the industry’s lowest levelized cost of storage (LCOS) for residential applications with over 20 years of daily cycling.
• 10.24kW continuous power output - 200A maximum continuous discharge supports simultaneous operation of multiple heavy loads including heat pumps, air conditioning, pumps, and full kitchen appliances.
• Segment LCD status display - high-visibility real-time system metrics including SOC percentage, charge/discharge power, WiFi status, and fault codes directly on the front panel for quick diagnostics.
• Universal inverter compatibility - CAN and RS485 interfaces pre-configured for plug-and-play integration with Deye, Victron, Growatt, GoodWe, Solis, and most mainstream hybrid inverter brands, reducing commissioning time.
• 10-year factory warranty - comprehensive manufacturer warranty backed by TIANON dual production facilities, global warehousing in Rotterdam and Johannesburg, and dedicated B2B technical support.

• CE - conformité européenne marking for EU market compliance
• UN38.3 - passed all transport safety tests for sea and air freight
• MSDS - material safety data sheet available on request
• IEC 62619 - safety requirements for secondary lithium cells and batteries

• Whole-house residential solar storage for villas and single-family homes
• Coastal off-grid property energy independence with C5-Ready protection against salt corrosion
• Light commercial backup power for small offices, retail stores, and restaurants
• Remote farm and agricultural infrastructure power for irrigation and equipment
• Emergency backup for medical clinics and critical community facilities

1. How many units can I parallel for a larger system? - Up to 8 C001-2 units can be paralleled, delivering a total capacity of over 128kWh for large residential or commercial energy storage installations.
2. Does the fire suppression require external power? - No, the condensed aerosol fire suppression module is fully self-contained and activates autonomously upon detecting a thermal event, requiring no external power or control signal.
3. Is the C001-2 compatible with my existing solar inverter? - The standard CAN/RS485 protocols support most mainstream inverter brands including Deye, Victron, Growatt, GoodWe, and Solis. Contact our technical team with your inverter model for pre-sales compatibility verification.
4. What maintenance does the C001-2 require? - The C001-2 is designed as a maintenance-free system with natural convection cooling requiring no fans or filters, and the sealed IP65 enclosure protects all internal components from environmental contamination.

Shaanxi Tianon New Energy Technology Co., Ltd. is a professional manufacturer of integrated energy storage systems, specializing in residential and commercial LiFePO4 battery solutions. With dual manufacturing hubs in Xi’an and Anhui, over 10 years of lithium battery export experience, and global warehousing in Rotterdam and Johannesburg, we deliver high-quality ESS products backed by rigorous testing and international certifications including CE, UN38.3, and IEC62619. We serve distributors and installers in 50+ countries across Europe, North America, and Southeast Asia.