China factories

China factory - Nanjing Juge Environmental Technology Co., Ltd.

Nanjing Juge Environmental Technology Co., Ltd.

  • China,Nanjing
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China Online Total Nitrogen Analyser Tn Analyzer In Waste Water 0-300mg/L OEM Range
China Online Total Nitrogen Analyser Tn Analyzer In Waste Water 0-300mg/L OEM Range

  1. China Online Total Nitrogen Analyser Tn Analyzer In Waste Water 0-300mg/L OEM Range

Online Total Nitrogen Analyser Tn Analyzer In Waste Water 0-300mg/L OEM Range

  1. MOQ: 1 Unit
  2. Price: USD2000-7000
  3. Get Latest Price
Packaging Details Neutral carton
Delivery Time 5-8 working days
Payment Terms Online order,T/T
Supply Ability 100 Unit/Week
Type Total Nitrogen
Principle Potassium persulfate resorcinol spectrophotometric method
Range 0-300mg/L OEM
Accuracy ≤±10%
Repeatability ≤±5%
Measurement Period 30min
Output RS-232, 4-20mA, RS-485
Specification 1500*500*450mm
Certification IOS9001, CE
Model Number AG-TN07
Place of Origin Nanjing, China
Brand Name JUGE

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Packaging Details Neutral carton Delivery Time 5-8 working days
Payment Terms Online order,T/T Supply Ability 100 Unit/Week
Type Total Nitrogen Principle Potassium persulfate resorcinol spectrophotometric method
Range 0-300mg/L OEM Accuracy ≤±10%
Repeatability ≤±5% Measurement Period 30min
Output RS-232, 4-20mA, RS-485 Specification 1500*500*450mm
Certification IOS9001, CE Model Number AG-TN07
Place of Origin Nanjing, China Brand Name JUGE
High Light OEM Range Total Nitrogen AnalyserTn Analyzer In Waste Water300mg/L Total Nitrogen Analyser
Online Total Nitrogen Water Quality Analyzer in Waste Water
 
>>Application

This method is applicable to wastewater with total nitrogen concentrations within the range of 0-300 mg/L.


>>Technical parameters

1. Measurement Method: Potassium persulfate resorcinol spectrophotometric method
2. Measurement Range: 0-300 mg/L
3. Accuracy: ≤±10%
4. Repeatability: ≤±5%
5. Measurement Cycle: Minimum cycle is 45 minutes; color development time can be adjusted flexibly between 5-30 min based on environmental conditions.
6. Sampling Cycle: Adjustable time interval (10-9999 min) or on-the-hour measurement mode.
7. Calibration Cycle: Adjustable at any interval from 1-99 days.
8. Maintenance Cycle: ≥168 hours, with each maintenance lasting ~1 hour.
9. Reagent Consumption: <0.50 CNY per sample.
10. Outputs: RS-232, 4mA-20mA, RS-485.
11. Environmental Requirements: Temperature-controlled indoor environment (recommended: 5-40°C); humidity 45%-85%.
12. Power Supply: AC 220±10% V, 50±1% Hz, 5A.
13. Dimensions: Height 1500 × Width 500 × Depth 450 mm.
14. Additional Features:

  • Data retention during abnormal alarms or power outages.
  • Touchscreen display and command input.
  • Automatic discharge of residual reactants and resumption of operation after power restoration or system reset.

>>Feature

Unique Design: This product features a distinctive design that ensures lower failure ratesreduced maintenance requirementsminimal reagent consumption, and higher cost-effectiveness compared to similar products.

  1. Selector Valve Assembly:

    • Enables flexible reagent sampling timing and diverse channel configurations.
    • Minimizes dead volume for easy maintenance and extended service life.
  2. Micro-Dosing Unit:

    • Utilizes a visual photoelectric system for precise reagent measurement, eliminating quantitative errors caused by peristaltic pump tube wear.
    • Achieves accurate micro-dosing with 0.7 mL per dose, significantly reducing reagent usage.
  3. Sample Introduction Unit:

    • Employs a peristaltic pump with negative pressure suction, creating an air buffer zone between reagents and the pump tube to prevent corrosion.
    • Simplifies and enhances flexibility in reagent mixing.
  4. Sealed Digestion Unit:

    • Operates under high-temperature and high-pressure conditions to accelerate reactions.
    • Eliminates corrosion risks from volatile gases in open systems.
  5. Reagent Tubing:

    • Uses imported modified PTFE (polytetrafluoroethylene) transparent tubing with an inner diameter >1.5 mm to minimize clogging by particulate matter in water samples.

>>Analytical Principle
In the presence of potassium persulfate, nitrogen-containing compounds in the water sample are completely converted to nitrate nitrogen after high-temperature digestion. Under acidic conditions, the nitrate nitrogen reacts with an indicator reagent to form a colored complex. The analyzer detects this color change, converts it into a total nitrogen concentration value, and outputs the result. The amount of colored complex generated corresponds to the total nitrogen concentration.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2015

  • Employee Number:

    50~100

  • Ecer Certification:

    Verified Supplier

JUGE was established in 2015, specializing in the field of environmental online monitoring. With environmental online monitoring systems at its core, JUGE integrates R&D, production, sales, and after-sales services. It is recognized as both a National High-Tech Enterprise and a "Specialized, Ref... JUGE was established in 2015, specializing in the field of environmental online monitoring. With environmental online monitoring systems at its core, JUGE integrates R&D, production, sales, and after-sales services. It is recognized as both a National High-Tech Enterprise and a "Specialized, Ref...

+ Read More

Get in touch with us

  • Reach Us
  • Nanjing Juge Environmental Technology Co., Ltd.
  • 2F, BLK A, TAIPING IND PARK, #219 JIANGJUN AVE, JIANGNING DISTRICT, NANJING, CHINA
  • https://www.environmentanalyzer.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement