Aircraft and satellite components operate in some of the most extreme and demanding environments known to man. From the frigid temperatures of high - altitude flight to the intense heat and variable humidity in space, these components must be able to withstand a wide range of conditions to ensure the safety and success of their missions. Our high - precision temperature humidity test chamber is specifically designed to meet the rigorous testing requirements of aircraft and satellite component manufacturers. This advanced chamber provides a controlled environment where components can be tested under precisely simulated conditions, allowing for the evaluation of their performance, reliability, and durability.
The core strength of this test chamber lies in its ability to achieve ultra - high precision in temperature and humidity control. The temperature can be adjusted within an extensive range, typically from - 70°C to 150°C, with an astonishing precision of ±0.1°C. Humidity levels can be precisely regulated from 5% to 98% relative humidity (RH), with a precision of ±2% RH. This level of accuracy is crucial for mimicking the exact environmental conditions that aircraft and satellite components will encounter during their operational lifetimes. Whether it's the extreme cold of space or the high - humidity conditions during a tropical flight, the chamber can replicate these scenarios with unparalleled precision.
To accommodate the diverse testing needs of aircraft and satellite components, the chamber offers a wide variety of customizable test profiles. Users can create complex, multi - stage test sequences that simulate the actual environmental changes a component will experience during its mission. For example, a test profile could include rapid temperature changes to mimic the transition from a hot launch environment to the cold of space, or cyclic humidity variations to simulate the effects of different atmospheric conditions. These custom - programmed test scenarios allow for a more comprehensive evaluation of component performance under realistic conditions.
In addition to temperature and humidity control, the test chamber is equipped with advanced vacuum and pressure control systems. This feature is essential for simulating the low - pressure and vacuum conditions that satellite components encounter in space. The chamber can achieve extremely low pressures, down to [X] Pascal, allowing for the testing of components' ability to function in a near - vacuum environment. Similarly, it can also simulate high - pressure conditions, such as those experienced during aircraft takeoff and landing, to ensure the components' structural integrity and performance under stress.
Aircraft and satellite components often experience rapid changes in temperature and humidity during their operation. To accurately test their ability to adapt to these changes, the test chamber is capable of achieving high - speed temperature and humidity transitions. The temperature can change at a rate of up to [X] °C per minute, and the humidity can be adjusted equally quickly. This feature enables the testing of components' transient response, ensuring that they can withstand sudden environmental changes without compromising their performance.
A sophisticated monitoring and data logging system is integrated into the test chamber. Multiple sensors are strategically placed throughout the chamber to continuously monitor temperature, humidity, pressure, and other relevant parameters. The data is logged at high frequencies, providing a detailed and continuous record of the component's performance during the test. This data can be analyzed in real - time or retrieved later for in - depth post - test analysis. The comprehensive data logging capabilities allow for the identification of potential weaknesses in the component's design and performance, enabling manufacturers to make informed improvements.
Given the critical nature of aircraft and satellite components, the test chamber is built with durability and cleanliness in mind. The chamber's exterior is constructed from high - quality, corrosion - resistant materials that can withstand the rigors of continuous use. The interior is designed to be clean and free from contaminants that could potentially affect the components being tested. Specialized air filtration and purification systems are installed to maintain a clean environment within the chamber, ensuring that the test results are not influenced by external pollutants.
Safety is of utmost importance in the testing of aircraft and satellite components. The test chamber is equipped with a comprehensive set of safety features, including over - temperature and over - humidity protection, fire suppression systems, and emergency stop buttons. In case of any abnormal conditions, such as a sudden increase in temperature or pressure, the safety systems will automatically activate to protect the components, the testing equipment, and the personnel. These safety features ensure a secure testing environment for all involved.
| Model |
THC-225 |
THC-408 |
THC-800 |
THC-1000 |
| Inside dimension(W x D x H) mm |
50 x 75 x 60 |
60 x 85 x 80 |
100 x 100 x 80 |
100 x 100 x 100 |
| Outside dimension(W x D x H) mm |
75 x 165 x 170 |
85 x 175 x 190 |
125 x 190 x 190 |
125 x 190 x 210 |
| Internal material |
#304 Stainless Steel |
| External material |
Powder coated #304 Stainless Steel |
| Temperature range |
+ 150℃~ - 70 ℃ |
| Humidity range |
5% ~ 98% R. H |
| Temperature resolution ℃ |
0.01 |
| Humidity resolution % R. H. |
0.1 |
| Temperature stability ℃ |
±0.3 |
| Humidity stability % R. H. |
±2 |
| High temperature ℃ |
100 |
100 |
100 |
100 |
| Heating time (min) |
20 |
30 |
30 |
30 |
| Low temperature |
0, -40, -70 |
0, -40, -70 |
0, -40, -70 |
0, -40, -70 |
| Cooling time (min) |
20, 50, 70 |
20, 50, 70 |
20, 50, 70 |
20, 50, 70 |
| Air circulation system |
Mechanical convection system |
| Cooling system |
Imported compressor, fin evaporator, gas condenser |
| Heating system |
Sus304 Stainless steel High-speed heater |
| Humidification system |
Steam Generator |
| Humidification water supply |
Reservoir, Sensor-controller solenoid valve, recovery-recycle system |
| Controller |
Touch panel |
| Electrical power requirements |
Please contact us for requirements of specific models |
| Safety device |
Circuit system load protection, compressor load protection, control system load protection, humidifier load protection, overtemperature load protection, fault warning light |
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Exporter,Trading Company,Seller
-
-
Total Annual:
5000000-10000000
-
Employee Number:
50~100
-
Ecer Certification：
Verified Supplier
+ Read More
