Guangdong Bell Experiment Equipment Co., Ltd
| Payment Terms | T/T, Western Union, L/C, D/A, D/P |
| Supply Ability | 100 Sets per Month |
| Delivery Time | Negotiation |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual inside. |
| Keyword | Lab Thermal Abuse Test Equipments |
| Controlling Accuracy | ±0.5℃ |
| Temperature Deviation | ±2.0℃, No load |
| Heating Rate | RT～150°C (Linear 5°C/min) |
| Control Display | PLC touch type (7 inch) + remote control |
| Working Cabinet Dimension | W600XD500XH600 mm |
| External Dimension | W940XD780XH1620 mm |
| Brand Name | DGBELL |
| Model Number | BE-8103 |
| Certification | CE/ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
UL 2580 Walk In Explosion Proof Chamber For Battery Test
UL1642 / UN38.3 PLC Touch Control Battery Test Chambers
Servo Computer Battery Crush Test Machine According To UL1642
UL1642 Altitude Environmental Simulation Lithium Battery Test Chamber
Product Specification
| Payment Terms | T/T, Western Union, L/C, D/A, D/P | Supply Ability | 100 Sets per Month |
| Delivery Time | Negotiation | Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual inside. |
| Keyword | Lab Thermal Abuse Test Equipments | Controlling Accuracy | ±0.5℃ |
| Temperature Deviation | ±2.0℃, No load | Heating Rate | RT～150°C (Linear 5°C/min) |
| Control Display | PLC touch type (7 inch) + remote control | Working Cabinet Dimension | W600XD500XH600 mm |
| External Dimension | W940XD780XH1620 mm | Brand Name | DGBELL |
| Model Number | BE-8103 | Certification | CE/ISO |
| Place of Origin | China | ||
| High Light | Battery Cell Thermal Abuse Test Chamber ，IEC 62133 Thermal Abuse Test Chamber ，IEC 62133 Battery Cell Tester | ||
Thermal Abuse Test Chamber for Battery Cell
1. IEC 62133-2017
2. UL 1642
3. GB 31241-2014
| Model
| BE-8103 |
|---|---|
| Structure
| All-in-one structure, the door uses explosion-proof lock + explosion-proof chain |
|
| Normal temperature to 150°C (Adjustable) |
| Temperature Range
| |
| Controlling Accuracy
| ±0.5℃ |
| Temperature Deviation
| ±2.0℃, No load |
| Heating Rate
| RT～150°C (Linear 5°C/min) |
| Control Display
| PLC touch type (7 inch) + remote control |
| Working Cabinet Dimension
| W600XD500XH600 mm |
| External Dimension
| W940XD780XH1620 mm |
| Inner Chamber Material
| SUS304 Stainless steel with mirror-finish |
| External Chamber Material
| SECC steel plate, fine powder paint coating (thickness 1.5mm) |
| Bottom
| With universal wheel |
| Observation Window
| 390 X 360mm (20mm thick explosion-proof glass, explosion-proof mesh) |
| Insulation Material
| Imported high-density glass wool, good heat insulation, to ensure maximum temperature insulation, tight sealing materials for high temperature resistant silicone, withstanding high temperatures over 300 degrees for a long time |
| Terminal Hole
| Diameter 50mm Terminal hole on the left and right sides |
| Power Supply
| 220V / 50HZ / 4.0KW |
| USB Interface
| With USB interface, the test data can be exported |
| Auxiliary Function
| Explosion-proof pressure relief device, smoke exhaust device, explosion-proof lighting device, electronic door lock system, safety stop switch |
A: Relevant standard test requirements
Single battery safety test
The heating test is carried out as follows:
1. The single battery is charged according to the method of 6.1.3
2. Put the single battery into the temperature chamber.
3. For lithium-ion batteries, the temperature chamber is increased from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining the temperature for 30 minutes.
4. For nickel metal cyanide batteries, the temperature chamber is raised from room temperature to 85 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.
5. Observe for 1h.
B: Battery module safety test
1. The battery module battery shall be charged according to the method in 6.1.4.
2. For lithium-ion batteries, the temperature chamber is raised from room temperature to 130 ° C ± 2 ° C at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 30 minutes.
3. For nickel metal cyanide batteries, the temperature chamber is raised to 85 ° C ± 2 ° C at room temperature at a rate of 5 ° C / min, and the heating is stopped after maintaining this temperature for 2h.
4. Observe for 1h.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2005
Total Annual:
10000000-100000000
Employee Number:
100~200
Ecer Certification：
Active Member
DGBELL is one of the top environmental test chamber manufacturer and battery testing equipment suppliers, we focus on test chambers for 15+ years. Company Profile Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dong... DGBELL is one of the top environmental test chamber manufacturer and battery testing equipment suppliers, we focus on test chambers for 15+ years. Company Profile Guangdong Bell Experiment Equipment Co., Ltd was established in 2005 with a registered capital of RMB 16.8 million. Located in Dong...
Get in touch with us
Leave a Message, we will call you back quickly!