Hangzhou Wellcare Technology Co.,Ltd.
| Model NO. | WGTC-00 |
| Storage Medium | Moncombustible/Nontoxic |
| Pressure Level | Medium Pressure (1.6MPa≤p<10.0MPa) |
| Condition | New |
| Transport Package | Tank Container |
| Specification | Customize |
| Trademark | WellCare |
| Origin | China |
| HS Code | 7309000000 |
| Production Capacity | 100 Set/Sets Per Month |
View Detail Information
Explore similar products
26cbm 316L ASME Standard Vessel Lr Certified 20FT T11 ISO Tank Container in
Un Portable T4 ASME Standard Lr Certified 20FT ISO Fuel Tank Container for
6000 Cbm 3000ton LPG Spherical Storage Tank
LNG Spherical Storage Tank
Product Specification
| Model NO. | WGTC-00 | Storage Medium | Moncombustible/Nontoxic |
| Pressure Level | Medium Pressure (1.6MPa≤p<10.0MPa) | Condition | New |
| Transport Package | Tank Container | Specification | Customize |
| Trademark | WellCare | Origin | China |
| HS Code | 7309000000 | Production Capacity | 100 Set/Sets Per Month |
Our Tank Contanier Advantages:
| Specifications - SWAP body tank container | ||
| Frame Dimensions (L x W x H) | 7150 x 2550 x 2670 mm | |
| Nominal Capacity | 30000 litre (±0.75%) | |
| Maximum Gross Mass | 36000 kgs | |
| Tare Mass | 3950 kg (± 3%) | |
| Design Temperature (Frame & Tank) | -40 to +130 °C | |
| Pressure | Working | 4.0 bar |
| Test | 6.0 bar | |
| Material | Tank (Shell & Ends) | SANS 50028-7 Type 1.4402/1.4404 (C≤0.03%) |
| Frame | SPA-H or equivalent | |
| Insulation | Shell | Rockwool (50kg/m3) 50mm thick on aluminium foil. |
| Ends | Glasswool (16kg/m3) thickness to suit on aluminium foil. | |
| | 6 runs. 110mm width stainless steel 304. 1" BSP inlet, 1" BSP outlet both with captive caps and cable. 4 bar working pressure, 6 bar test with warning decals and markings. A condensate drain is fitted. | |
| Manhole | 500mm low profile, 8 point fixing with Super Tanktyt Lid seal. | |
| Assembly | 1-off. 2½" BSP Supermaxi Highflow relive, without flameproof gauze. Pressure only set at +4.4 bar (63.8psi). The assembly is situated off centre on a tangential tank pad. | |
| Air Inlet assembly | DN 40 ball valve terminating with 1½" BSP connection and cap. The assembly is situated off centre on a tangential tank pad. | |
| Top Discharge | DN80 stainless steel 316 tank pad with a blind flange. The assembly is fitted on centre on a horizontal tank pad. | |
| Bottom Discharge | DN80 45° Univalve Internal Footvalve part no. TBC fitted with an integrated butterfly valve terminating with a 3" BSP spigot with 3" BSP blind cap and chain. | |
| Thermometer | A surface mounted analogue type is fitted to the rear end dished end of the tank. Dual scale -40°C to +160°C / -40°F to 320°F. The thermometer is fitted with a protection bar. | |
| Document holder | A clear plastic document holder ø110mm is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | |
| Calibration | A calibration plate marked in cm/litres is fitted on the spillbox side wall. No calibrated stainless steel grade dipstick and bracket fitted. | |
| Design Code | ASME VIII DIV. 1 | |
| Approval | IMDG, US DOT CFR 49, RID/ADR, CSC, TC, TIR / Customs, UIC, ISO 1496/3 | |
Company Details
Ecer Certification：
Site Member
Hangzhou Wellcare Technology Co., Ltd. is a gas & liquid equipment manufacturer integrating R&D and production of large-scale EPC engineering of complete sets of alcohol equipment, furfural and hydrogen peroxide, cryogenic air separation unit, gas generators, PSA gas generators, gas pressure ves... Hangzhou Wellcare Technology Co., Ltd. is a gas & liquid equipment manufacturer integrating R&D and production of large-scale EPC engineering of complete sets of alcohol equipment, furfural and hydrogen peroxide, cryogenic air separation unit, gas generators, PSA gas generators, gas pressure ves...
Get in touch with us
Leave a Message, we will call you back quickly!