Suzhou Quanjuda Purification Technology Co., LTD
| Payment Terms | T/T |
| Supply Ability | ~200,000 mats per month |
| Delivery Time | 10-15days |
| Packaging Details | 8 Mats/case; 10 Mats/case |
| Material | PE |
| Color | Blue/White |
| Thickness | 28/30/32/35/40/45 mic |
| Layer | 30 layer |
| Popular sizes | 18" X 36" |
| Name | Cleanroom Sticky Mat |
| Brand Name | allesd |
| Model Number | SM0102 |
| Certification | ISO/SGS/CTI |
| Place of Origin | China |
View Detail Information
Explore similar products
Multi Layer Cleanroom Tacky Mats Sticky Mat Low Density Polyethylene Material
Blue Reusable Sticky Mats Silicon Material Tacky Floor Mats Size 600X900mm
Reusable Washable Silicone Cleanroom Sticky Mat Size Thickness 3mm / 5mm 1 Year
26" x 45" Walk Off Adhesive Cleanroom Sticky Mat Color Blue White 30 / 60
Product Specification
| Payment Terms | T/T | Supply Ability | ~200,000 mats per month |
| Delivery Time | 10-15days | Packaging Details | 8 Mats/case; 10 Mats/case |
| Material | PE | Color | Blue/White |
| Thickness | 28/30/32/35/40/45 mic | Layer | 30 layer |
| Popular sizes | 18" X 36" | Name | Cleanroom Sticky Mat |
| Brand Name | allesd | Model Number | SM0102 |
| Certification | ISO/SGS/CTI | Place of Origin | China |
| High Light | sticky walk off mats ，sticky dust mats | ||
Blue White Disposable PE Cleanroom Sticky Mat 30 layers High Tackiness 18" x 36"
Description:
Clean room mats also known as sticky mats, that help pickup impurities for door entrances that require dust and dirt control.
Our clean room sticky mats feature a tacky surface which removes dirt and dust from shoe or cart castor before they enter.
Sticky mat can vary in sizes, colors, placement, and numbers based on the characteristics and logistics of each cleanroom.
Placement
Matting should be placed in an area where it is clean and flat. It should be placed just before or just after the ingress/ egress point for each cleanliness or control change. It is suggested that the placement sites are worked backward from the final clean area or cleanroom.
Size
The proper size mat depend on the width of the opening and direction and variance of the traffic.
Normally the width of mat should be 2/3rds to 3/4ths of the width of the doorway.
It does not normally need to cover the full width as usually approaching from the straight direction, passes through middle of the doorway.
However, if the traffic enters from the side of the entry or at a sharp angle, then the width of the mat needs to be wider so as to allow for enough footstep.
Color
The color of sticky mats can vary from standard blue, white, grey or transparent. The color will not effect on the function of the mat. In general, the blue color is preferred by most electronics industry to make sure the layers are changed at frequent intervals. However, white and grey is also popular for hospital or pharmaceutical industry.
Storage
Mats should be stored flat. Also it should be used in a controlled temperature of 12-35 C environment for ideal results
Long-term storage of mat should always be on a hard, flat, and solid surface. Storage on the original shipping pallet is recommended.
Normal warehouse conditions are acceptable but extreme temperatures (less than 0 or greater than 40 C) should be avoided.
Storage of product in excess of one year is not recommended. However, under normal storage conditions, product will not have any variation in performance for a period of up to three years.
Applications:
Widely used in entrance of clean rooms, food manufacturing, labs, electronics etc.
Features:
| Spec | Value |
|---|---|
| Size | 18" X 36", 24" X 36", 18" X 45", 26" X 45" |
| Color | Blue, White, Grey, Transparent, Green |
| Tackiness | Middle/High |
| Thickness | 28/30/32/35/40/45 micron |
| Layer | 30 or 60 layers |
| Vertical Stretching Strength(N) | ＞ 20 |
| Lateral Stretching Strength(N) | ＞ 12 |
| Vertical Fracture Elongation Rate(%) | ＞ 200 |
| Lateral Fracture Elongation Rate(%) | ＞ 300 |
| Anti-Aging Performance | 240 H |
| Temperature Stability | 60°C-80°C |
| Package | 4 Mats/case; 8 Mats/case; 10 Mats/case |
About Us
Established in 2011, Suzhou Quanjuda Purification Technology Co., LTD is a leading manufacturer and exporter of various ESD & Cleanroom products, offers a full line of ESD & Cleanroom equipment and supplies, providing comprehensive services by manufacturing, sourcing and exporting products from China.
Other Products we Supply
More photos
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2011
Total Annual:
3000,000-5000,000
Employee Number:
20~30
Ecer Certification：
Verified Supplier
Our company profile Established in 2011,Suzhou Quanjuda Purification Tech Co,.Ltd is located in SIP Suzhou,one of the most dynamic cities in eastern coast of China,set up offices in the number 668, Fengting Avenue. As a leading manufacturer and exporter of ESD & Cleanroom products, we offe... Our company profile Established in 2011,Suzhou Quanjuda Purification Tech Co,.Ltd is located in SIP Suzhou,one of the most dynamic cities in eastern coast of China,set up offices in the number 668, Fengting Avenue. As a leading manufacturer and exporter of ESD & Cleanroom products, we offe...
Get in touch with us
Leave a Message, we will call you back quickly!