Copper Alloy CCS Combo 2 EV Charging Connector 16kg Flame Retardant

Product Specification

Copper Alloy Electric Car Charging Station EV DC Fast Charger CCS2 Flame Retardant Grade Ul94 V-0

DC Quick EV Charger Type 2 CCS Combo Plug

Product Desciption:

Charging plug meet 62196-3 IEC 2011 SHEET 3-Im standard.Housing massive structure promote protection performance. Led shows sworking condition. Protection class IP 54. Max charging power 127.5kW.

Rated Operational Current 80A/125A/200A/250A

Operating Current 400/750VDC

Contact Resistance 0.5mΩ Max

Insulation Resistance >2000MΩ

The temperature rise of the terminal <50k

Withstand Voltage) 3200V

Mechanical Endurance Unload Plug＞1000times

Coupling Pull - out Force 70N<F<140N

Operating Temperature -30℃~+50℃

Seals:Rubber & Silica gel

Contact Pin Copper alloy, silvering the surface+thermoplastic top

Case Material thermoplastic

Flame-retardant grades Ul94 V-0

Electric Performance:

Rated current : 150A

Operating voltage : 1000V DC

Insulation resistance : >2000MΩ (DC1000V)

Terminal temperature rise :<50K

Withstand voltage :3200V

Vibration resistance :Meet JDQ 53.3 requirements

Contact impedance:0.5MΩ Max

Mechanical properties

Mechanical life:no-load plug in/pull out>10000times

Insertion and extraction :70N<F<140N

Application:

High voltage connections for car chargers, high voltage distribution boxes, motor controllers, air conditioners, PTCs, batteries, etc., can also be used for short circuit control.

technical parameter:

Electrical properties

Rated current and contact resistance:

Rated Voltage: 250/440V AC, 750V DC

Insulation resistance: ≥1000MΩ (AC charging connector)

Mechanical behavior

Durability: more than 10000 times, (non-charged state)

Environmental performance

Ambient temperature: -65°C ~ +125°C (PE cable -40°C ~ +85°C)

Vibration: MIL-STD-202 Method204

Corrosion Resistance: MIL-STD-202 Method 101

Main technical specifications

Material:

- Shell: Thermoplastic

- Insulator: Thermoplastic

- Sealing ring: rubber material

- Insulation flame retardant grade: UL94-V0

- Contacts: Copper alloy, gold plated contacts, gold plated signal contacts

Environmental performance:

- Operating temperature: -30℃~+50℃

- Relative humidity: 98% at 40°C

- Protection class: IP54 (while charging)

Features:

1. Comply with 62196-3 IEC 2011 SHEET 3-Im standard

2. Simple shape, support after installation

3. Contact design drainage structure to improve safety performance

4. The pin head is designed with safety insulation to prevent accidental direct contact with human hands.

5. Back protection rating IP54

6. DC maximum charging power: 127.5kW

7. AC maximum charging power: 41.5kW

Safety Protection: leakage current; under and over voltage, frequency, current; high temperature; grounding protection and lightning protection.

Connector Type:IEC 62196-2(Type 2), SAE J1772(Type 1),GB/T20234.2-2015

Charging Cable Length: 5m |Long cable length will help you to solve the charging problem of complex surroundings.

Specification:

Package:

Packing list:

1 x holder

3 x screws(M4*40)

3 x expansion rubber(6mm)

WARNING:

• Do not modify, retrofit, or change any EV Charging Cable Station's part by yourself under any circumstances
• Do not allow rain water to run along the length of charge cable, causing the electrical outlet or charging port to become wet.
• Make sure that Portable EV Charger Station all safety facilities are available at all times and test then regularly to ensure Safety
• Portable EV Charging Box's all metal parts should be insulated to prevent short circuit caused by the touch of the tool with the metal frame.
• The leakage protection would stop the charger working if it gets water into it, or even worse, cause the fire, electrical shock or serious injury.

Regularly check whether the portable EV charger has visible damage, there may be an electric shock hazard when using the damaged product Package