Thermoplastic UL94 V-0 Type 1 Type 2 EV Charging Connector CHAdeMO 62.5kW

Product Specification

Fast Charging Station Rated Current 150A EV Charging Connector CHAdeMO Socket 62.5kW DC Fast

EV Charging Connector CHAdeMO Socket 62.5kW DC Fast

Product Desciption:

EV DC fast charging station 125A DC 1000V CHAdeMO plug with 5 meters cable connector

Plugs and connectors automotive Product Features

1.Meet the electric vehicle conductive charging connection device CHAdeMO Technical standards and requirements;

2.Nice shape, hand-held ergonomic design, easy to use;

3.Protection class: IP55(in mated conditions);

4.Reliability of materials, antiflaming, environmental protection, abrasion resisitance, impact resistance, oil resistance and Anti-UV

Electric Performance:

Rated current : 150A

Operating voltage : 1000V DC

Insulation resistance : >2000MΩ (DC1000V)

Terminal temperature rise :<50K

Withstand voltage :3200V

Vibration resistance :Meet JDQ 53.3 requirements

Contact impedance:0.5MΩ Max

Mechanical properties

Mechanical life:no-load plug in/pull out>10000times

Insertion and extraction :70N<F<140N

Application:

High voltage connections for car chargers, high voltage distribution boxes, motor controllers, air conditioners, PTCs, batteries, etc., can also be used for short circuit control.

technical parameter:

Electrical properties

Rated current and contact resistance:

Rated Voltage: 250/440V AC, 750V DC

Insulation resistance: ≥1000MΩ (AC charging connector)

Mechanical behavior

Durability: more than 10000 times, (non-charged state)

Environmental performance

Ambient temperature: -65°C ~ +125°C (PE cable -40°C ~ +85°C)

Vibration: MIL-STD-202 Method204

Corrosion Resistance: MIL-STD-202 Method 101

Main technical specifications

Material:

- Shell: Thermoplastic

- Insulator: Thermoplastic

- Sealing ring: rubber material

- Insulation flame retardant grade: UL94-V0

- Contacts: Copper alloy, gold plated contacts, gold plated signal contacts

Environmental performance:

- Operating temperature: -30℃~+50℃

- Relative humidity: 98% at 40°C

- Protection class: IP54 (while charging)

Features:

1. Comply with 62196-3 IEC 2011 SHEET 3-Im standard

2. Simple shape, support after installation

3. Contact design drainage structure to improve safety performance

4. The pin head is designed with safety insulation to prevent accidental direct contact with human hands.

5. Back protection rating IP54

6. DC maximum charging power: 127.5kW

7. AC maximum charging power: 41.5kW

Safety Protection: leakage current; under and over voltage, frequency, current; high temperature; grounding protection and lightning protection.

Connector Type:IEC 62196-2(Type 2), SAE J1772(Type 1),GB/T20234.2-2015

Charging Cable Length: 5m |Long cable length will help you to solve the charging problem of complex surroundings.

Specification:

Package:

Packing list:

1 x holder

3 x screws(M4*40)

3 x expansion rubber(6mm)

WARNING:

• Do not modify, retrofit, or change any EV Charging Cable Station's part by yourself under any circumstances
• Do not allow rain water to run along the length of charge cable, causing the electrical outlet or charging port to become wet.
• Make sure that Portable EV Charger Station all safety facilities are available at all times and test then regularly to ensure Safety
• Portable EV Charging Box's all metal parts should be insulated to prevent short circuit caused by the touch of the tool with the metal frame.
• The leakage protection would stop the charger working if it gets water into it, or even worse, cause the fire, electrical shock or serious injury.

Regularly check whether the portable EV charger has visible damage, there may be an electric shock hazard when using the damaged product Package