Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Delivery Time | 30 days |
| Supply Ability | 20 sets/month |
| Packaging Details | Plywood Case |
| Applied Standard | UL2580, UN38.3, UL 1642, IEC 62133 |
| Drive Mode | Hydraulic pressure |
| Unit Conversion | Kg/N/Lb |
| Piston Diameter | 32mm |
| Crush Range | 0~200MM |
| Crush Accuracy | ±1% |
| Nail Penetration Speed | 0-40mm/s（adjustable） |
| Battery Extrusion Head | Standard Extrusion Head |
| Brand Name | Sinuo |
| Model Number | SN554 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
Product Specification
| Payment Terms | T/T | Delivery Time | 30 days |
| Supply Ability | 20 sets/month | Packaging Details | Plywood Case |
| Applied Standard | UL2580, UN38.3, UL 1642, IEC 62133 | Drive Mode | Hydraulic pressure |
| Unit Conversion | Kg/N/Lb | Piston Diameter | 32mm |
| Crush Range | 0~200MM | Crush Accuracy | ±1% |
| Nail Penetration Speed | 0-40mm/s（adjustable） | Battery Extrusion Head | Standard Extrusion Head |
| Brand Name | Sinuo | Model Number | SN554 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 1KN 20KN EV Battery Testing Equipment ，UL 1642 EV Battery Testing Equipment ，UL2580 battery cell testing equipment | ||
UL2580 Electric Vehicle Lithium Battery Cell Crush Testing Equipment
Complied Standards & Clauses
UL 2580:2020 STANDARD FOR SAFETY Batteries for Use In Electric Vehicles Annex B2.4 and Annex D3.3
IEC 62133-2012
UN38.3 ,UL 1642
Equipment Overview
Application: It is used to simulate all kinds of batteries in use, transportation, storage, or handling home waste, the battery suffers from squeezing and acupuncture.
Test Principle:
Extrusion: Place the battery between two plates,13.0 ± 0.78 kN of extrusion of 13.0 ± 0.78 kN is applied to the plate, and the battery should not occur outside, and fire and explosion.
Acupuncture:The test should be carried out at ambient temperature of 20 ° C ± 5 ° C,(the contact of the thermocouple is fixed on the large surface of the battery) the battery having a thermocouple is placed in a ventilation cabinet, pierced the center position of the largest surface of the battery with a diameter of 2-8 mm to 10 mm / s to 40 mm / s speed, maintain any time and observe the test result, t The battery does not explode, not fire is qualified.
Structure: One machine structure, the door uses explosion-proof lock + explosion-proof chain
Use Environment: System power supply three-phase power supply:AC380V±10%/50Hz 3KW.
Technical Parameters
| Control and Operation | PLC touch intelligent control system, remote control device. |
| Dimensions | Inner box WDH=500×300×300mm,304 stainless steel Outer box WDH=940×780×1620mm,A3 Cold rolled steel plate paint, thickness 1.0mm Visual window WH=390×360,20mm Tempered explosion-proof glass + protective steel network double-layer protection |
| Drive mode | Hydraulic pressure |
| Unit conversion | Kg/N/Lb |
| Max. pressure | 1KN-20KN Adjustable, customized according to requirements |
| Piston diameter | 32mm |
| Crush/Nail Penetration Range | 0~200MM |
| Crush Accuracy | ±1% |
| Nail Penetration Test speed | 0-40mm/s(adjustable) |
| Battery Extrusion Head | Standard Extrusion Head, Area ≥ 20cm2 |
| Crushing Time Maintaining | 0~99hours59minutes59seconds |
| Steel Needle | φ5mm～φ8mm High temperature steel needle,Length 100mm(Specified). |
| USB USB Interface | With USB interface, test data can be exported |
| Accessibility | Explosion-proof pressure relief device, smoke exhaust device, explosion-proof chain |
| Purchase piece | Temperature capture, voltage collection system, video surveillance system |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!