Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 days |
| Packaging Details | Export packing |
| Chamber internal height | >400mm |
| Chamber internal diameter | 350mm diameter |
| IP code test range | IPX8 test |
| Maximum pressing force | 4.0 bar |
| Sample size | W170mm*D90mm*H30mm |
| Tank material | SUS304 stainless steel |
| Control | PLC control |
| Drive | External air compressor drive |
| Brand Name | Sinuo |
| Model Number | SN4411 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Programmable Hot Water Spray Testing for Electronics & EV Components IEC 60529
DIN 40050-9 High Pressure Water Ingress Testing Equipment IPX6K IPX9K Jet Nozzle
IPX1 IPX2 Water Ingress Testing Equipment Vertical Rain Drip Box IEC 60529
IPX1 IPX4 Water Ingress Testing Equipment Rain Spray IP Code Test Chamber IEC
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 days | Packaging Details | Export packing |
| Chamber internal height | >400mm | Chamber internal diameter | 350mm diameter |
| IP code test range | IPX8 test | Maximum pressing force | 4.0 bar |
| Sample size | W170mm*D90mm*H30mm | Tank material | SUS304 stainless steel |
| Control | PLC control | Drive | External air compressor drive |
| Brand Name | Sinuo | Model Number | SN4411 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 60529 IPX8 Test Chamber ，Immersion Test Equipment for Automotive Component ，IPX8 Test Chamber | ||
High Pressure Water Tank IPX8 Immersion Test Equipment IEC 60529
Complied Standards & Clauses
Conforms to IEC 60529:2013 IPX8 etc.
Product Overview
This test is applicable to electrical and electronic products that are waterproof and may be subjected to immersion in water during transportation or use. The test specimens are immersed in a water tank to a specified depth and subjected to a specified pressure. After the test, the extent of water ingress and any changes in performance are examined.
Technical Parameters
| Inner diameter of the tank | 350mm |
| Height inside the tank | 590mm |
| External dimensions of the tank | Approximately 360mm in outer diameter * 900mm in height |
| Stainless steel tank thickness | 5mm |
| Time control | 1～99999S |
| Pressure management methods | Manual adjustment |
| Pressure display method | The touchscreen display allows for pressure setting and pressure display via the touchscreen. |
| Pressure gauge adjustment range | Atmospheric pressure to 500 kPa (1–50m water depth) |
| Maximum limit pressure | The settings are configurable at the factory. It features pressure switch protection, typically set to automatically vent when the pressure reaches 550 KPa. |
| Pressure protection | Spring-loaded safety relief valve; Program control: If the pressure exceeds the upper limit, the system immediately shuts down and releases the pressure. |
| Pressure release method | Automatic pressure release after the test is completed. |
| Lid opening method | Manual opening and closing |
| Pressurization system | External air supply (to be provided by the user, ≥ 5 kg) |
| Control system | Touch screen control |
| Container material | 304 stainless steel |
| Features | This water immersion test device is equipped with a pressure protection and explosion-proof device and a drainage and pressure relief device. |
| Safety and protection system | Alarm sound notification |
| Equipment usage conditions | |
| Drain pipe diameter | Please plan the equipment placement carefully, and install the circuit breaker nearby in advance. The drain pipe should be installed below the circuit breaker, and the drain pipe (1/2 inch pipe) should be installed close to the ground. |
| Power requirements |
AC 220-240V, 50Hz±10%; Power: 1KW; Install a separate 16A circuit breaker; the circuit breaker must have terminal blocks, and the power cord must be ≥2.5㎡ |
| Environmental conditions |
Temperature: 15℃ to 35℃; Relative humidity: 25% RH to 75% RH; Atmospheric pressure: 86 kPa to 106 kPa |
| The pressure gauge reading corresponds to the water depth |
0.1MPa=1Kg/cm²=10M； 0.2MPa=2Kg/cm²=20M； 0.3MPa=3Kg/cm²=30M； 0.4MPa=4Kg/cm²=40M； |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!