Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Temperature range | 0 ~ 100℃ |
| Temperature fluctuation | ±2.0℃ |
| Heating rate | Average 3℃/min |
| Cooling rate | Average 1℃/min |
| External chamber size | W1200 X H2000 X D1000MM; |
| Inner chamber size | W400*H500*D500mm |
| Force range | 1kg-200kg |
| Squeeze stroke | 0~300MM |
| Brand Name | Sinuo |
| Model Number | SN5513 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Temperature range | 0 ~ 100℃ | Temperature fluctuation | ±2.0℃ |
| Heating rate | Average 3℃/min | Cooling rate | Average 1℃/min |
| External chamber size | W1200 X H2000 X D1000MM; | Inner chamber size | W400*H500*D500mm |
| Force range | 1kg-200kg | Squeeze stroke | 0~300MM |
| Brand Name | Sinuo | Model Number | SN5513 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 62133-2 lithium-ion battery tester ，battery internal short circuit test equipment ，EV battery testing equipment with warranty | ||
It conforms to IEC 62133-2: 2017 clause 7.3.9, JISC8714:2007 5.5, and etc.
This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for battery cell safety test.
|
Main technical parameters of temperature control chamber |
||
|
1 |
Temperature range |
0 ~ 100℃ |
|
2 |
Analytical accuracy |
0.1℃ |
|
3 |
Temperature fluctuation |
±2.0℃ |
|
4 |
Low temperature |
0℃ |
|
5 |
Heating rate |
Average 3℃/min (from 0℃ to 100℃, non-linear no-load) |
|
6 |
Cooling rate |
Average 1℃/min (from 100℃ to 0℃, non-linear no-load) |
|
7 |
Heater |
Fin type heat pipe shaped stainless steel electric heater |
|
8 |
Air supply circulation system |
Convection air circulation system |
|
9 |
Safety devices |
Over-temperature alarm, MCCB overload protection, etc. |
|
10 |
Insulation material |
Rigid polyurethane foam + high-efficiency compressed glass wool |
|
11 |
Thermostat |
TEMMI controller imported from Korea |
|
12 |
Inner chamber size |
W400*H500*D500mm |
|
13 |
Inner chamber material |
Mirror stainless steel plate, bottom reinforcement |
|
14 |
External chamber size |
W1200 X H2000 X D1000MM; |
|
15 |
External chamber material |
Cold rolled steel paint treatment |
|
Main technical parameters of force test system |
||
|
1 |
Force range |
1kg-200kg |
|
2 |
Unit |
Kg/N/Lb |
|
3 |
Squeeze stroke |
0~300MM |
|
4 |
Force display accuracy |
1N |
|
5 |
Resolution |
1/10,000 |
|
6 |
Force accuracy |
≤0.5％ |
|
7 |
Speed display accuracy |
1mm |
|
8 |
Driven type |
Servo motor drive |
|
9 |
Squeeze speed |
The squeeze speed is adjustable. The speed of the first contact point during squeeze can be set to 1.5cm/s; the test process speed range is 0.01~900MM/MIN (adjustable, 0.1~1.5CM/S) |
|
10 |
Squeeze head size |
10*10*5mm or 10*10*2mm |
|
11 |
Squeeze head material |
One piece each of nitrile rubber (NBR, side 10mm, thickness 2mm) and acrylic (acryl, side 5mm, thickness 2mm) |
|
12 |
Squeeze workbench material |
Aluminum alloy plate or 316 stainless steel plate, corrosion resistant |
|
13 |
Suitable Battery size |
300 X 300 X 300mm(WXDXH) |
|
14 |
Visual window |
300 X 300mm explosion-proof glass |
|
15 |
Air supply outlet |
There are two air supply vents on the left side of the box. |
|
16 |
Lighting |
There is a lighting lamp inside the box, which can illuminate the entire testing space |
|
17 |
Voltage collection range |
0-100V, acquisition frequency 100HZ/second |
|
18 |
Voltage resolution |
0.1mv |
|
19 |
Voltage acquisition frequency |
100/s |
|
20 |
Deformation range |
0-300MM |
|
21 |
Max. test plane |
300X300MM |
|
22 |
Power supply |
220V 50HZ |
|
23 |
Power |
2.0KW |
|
24 |
Machine weight |
Approx.350KG |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!