Sinuo Testing Equipment Co. , Limited
| Flame Height | 12±1mm adjustable(with flame height gauge) |
| Supply Ability | 10 sets per month |
| Payment Terms | T/T |
| Temperature Range | 0~1000℃ |
| Temperature Thermocouple | φ0.5 armour nickel-chromium/nickel aluminum wire K-Thermocouple |
| Combustion angle | tilt 45°( testing ) or vertical ( when adjust the height of the flame) |
| Delivery Time | 30 Days |
| Gas category | 95% butagas ( can use the bottled lighter gas) |
| Packaging Details | Plywood Case |
| Heating Time | From 100°to 700°,time for standard values within 23.5S±1S |
| Model Number | SN773 |
| Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo |
| Place of Origin | China |
View Detail Information
Explore similar products
UL94 Flammability Tester VW-1 Horizontal Vertical Flame Test Equipment
Horizontal & Vertical Flame Tester UL94 Flammability Test Chamber VW-1/FT-2
UL 1581 Compliant Cable Flammability Tester | 500W High-Power Flame Testing
High Current Arc Ignition Testing Equipment for Electrical Insulation Materials
Product Specification
| Flame Height | 12±1mm adjustable(with flame height gauge) | Supply Ability | 10 sets per month |
| Payment Terms | T/T | Temperature Range | 0~1000℃ |
| Temperature Thermocouple | φ0.5 armour nickel-chromium/nickel aluminum wire K-Thermocouple | Combustion angle | tilt 45°( testing ) or vertical ( when adjust the height of the flame) |
| Delivery Time | 30 Days | Gas category | 95% butagas ( can use the bottled lighter gas) |
| Packaging Details | Plywood Case | Heating Time | From 100°to 700°,time for standard values within 23.5S±1S |
| Model Number | SN773 | Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo | Place of Origin | China |
| High Light | 12±1mm adjustable flame height Needle Flame Test Apparatus ，PLC control with 7-inch touchscreen Flammability Testing Equipment ，0~1000℃ temperature range IEC 60695-11-5 Test Equipment | ||
The Needle Flame Test Apparatus is designed to evaluate the fire hazard of electrical and electronic products, components, insulating materials and solid combustible materials under fault conditions.
The tester applies a controlled needle flame to the test specimen at a specified angle and evaluates whether the material ignites, as well as the flame duration and combustion behavior after exposure.
The equipment is designed in accordance with IEC 60695-11-5 and is suitable for needle flame testing under specified test conditions.
With PLC control and a 7-inch color touchscreen, the SN773 provides automated test operation and convenient parameter monitoring for laboratory and quality-control applications.
The test uses a needle-shaped burner supplied with butane gas. The burner is positioned at 45° to the specimen during the test.
A specified flame is applied to the sample for the required duration. The fire hazard is evaluated based on factors including:
The test helps assess the resistance of materials and components to ignition caused by a small external flame under abnormal or fault conditions.
The PLC control system automates the test sequence and improves testing repeatability.
A user-friendly touchscreen interface allows operators to set and monitor the test parameters conveniently.
The flame height is adjustable to 12 ± 1 mm and can be checked using the supplied flame height gauge.
The integrated timer supports precise measurement of ignition and combustion duration.
The test procedure incorporates an independent air-draft system to help maintain the required testing conditions.
| Parameter/ model | SN773 |
|---|---|
| Working voltage | AC 220V/50Hz |
| Control | PLC |
| Display | 7 inch color touch screen |
| Timing device | 9999X0.1S |
| Combustor | Inner boreφ0.5mm ± 0.1mm , OD ≤φ0.9mm, L ≥ 35mm, stainless steel |
| Combustion angle | tilt 45°( testing ) or vertical ( when adjust the height of the flame) |
| Height of the flame | 12±1mm adjustable(with flame height gauge) |
| Gas category | 95% butagas ( can use the bottled lighter gas) |
| Range of temperature test | 0~1000℃ |
| Flame warming requirement | From 100°to 700°,time for standard values within 23.5S±1S |
| Temperature thermocouple | φ0.5 armour nickel-chromium/nickel aluminum wire K-Thermocouple |
| Work shop | 0.5 cube, staunless steel case, black yogon background |
| Testing process | Test procedure automatic control, independent air draft |
| Volume size adjustment | Flowmeter adjustment |
| Accessories |
A White Pine Board *1
Tissue Paper *5
Flame height gauge as per figure A.3 *1
A remote controller*1:
A aluminum foil exhaust pipe *1 |
| Equipment size & weight | 1100mm* 550mm* 1100mm, 120KGS |
| Conforms to standard | IEC 60695-11-5, etc. |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!