Sinuo Testing Equipment Co. , Limited
| Temperature Resolution | 0.01℃ |
| Humidity Resolution | 0.01RH |
| Packaging Details | Plywood |
| Load Capacity | 1 kW heat load |
| Temperature Range | -40°～ 130℃ |
| Payment Terms | T/T |
| Cooling Rate | Average 1.0℃/min (non-linear, no load) |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Cooling Method | Water-cooled |
| Heating Rate | ≤3.0℃/min (non-linear, no load) |
| Humidity Range | Standard: 20%RH～95%RH |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
| Model Number | SN881C-9.7F |
| Brand Name | Sinuo |
View Detail Information
Explore similar products
Constant Temperature and Humidity Chamber 20m³ Programmable Climate Chamber
IEC60529 IP5/6X Walk-In Ground Embedded Sand And Dust Test Chamber
Walk-in Environmental Temperature and Humidity Test Chamber 48m³
Constant Temperature Humidity walk in environmental test chamber 13m3 less than
Product Specification
| Temperature Resolution | 0.01℃ | Humidity Resolution | 0.01RH |
| Packaging Details | Plywood | Load Capacity | 1 kW heat load |
| Temperature Range | -40°～ 130℃ | Payment Terms | T/T |
| Cooling Rate | Average 1.0℃/min (non-linear, no load) | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Cooling Method | Water-cooled |
| Heating Rate | ≤3.0℃/min (non-linear, no load) | Humidity Range | Standard: 20%RH～95%RH |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| Model Number | SN881C-9.7F | Brand Name | Sinuo |
| High Light | IEC 60068 compliant walk-in test chamber ，walk-in constant temperature humidity chamber ，walk-in environmental test chamber with warranty | ||
The Walk-in Constant Temperature and humidity Test Chamber is designed to expose products, components, and materials to controlled temperature and humidity environments to evaluate their performance and reliability under various conditions. This equipment is widely used in environmental simulation and reliability testing for electrical and electronic products, as well as other industrial components and materials. It supports constant high/low temperature testing, temperature/humidity cycling tests, and gradual temperature/humidity change tests.
This constant temperature and humidity test chamber conforms to the following IEC standards and clauses:
• IEC 60068-2-1: Environmental testing – Part 2-1: Tests – Test A: Cold
• IEC 60068-2-2: Environmental testing – Part 2-2: Tests – Test B: Dry heat
• IEC 60068-2-3: Environmental testing – Part 2-3: Tests – Test Ca: Damp heat, steady state
• IEC 60068-2-30: Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)
The following samples are not permitted to be tested or stored in this chamber:
• Flammable, explosive, or highly volatile substances
• Corrosive substances, biological samples
• Samples with strong electromagnetic emission sources
|
Volume and Dimensions |
|
|
Effective Volume |
9.7F |
|
Internal Chamber Dimensions |
W2200*H2000*D2200 mm |
|
External Dimensions |
Approx. W2650×H2950×D2900 mm |
|
Performance Specifications |
|
|
Cooling Method |
Water-cooled |
|
Temperature Range |
-40°～ 130℃ |
|
Humidity Range |
Standard: 20%RH～95%RH |
|
Temperature /Humidity Fluctuation |
±2℃/±2.0%RH |
|
Temperature Resolution |
0.01℃ |
|
Humidity Resolution |
0.01RH |
|
Temperature Uniformity |
≤2℃ |
|
Humidity Uniformity |
≤75%RH: ±3%RH; >75%RH: ±5%RH |
|
Heating Rate |
≤3.0℃/min (non-linear, no load) |
|
Cooling Rate |
Average 1.0℃/min (non-linear, no load) |
|
Load Capacity |
1 kW heat load |
|
Temperature and Humidity Diagram |
|
|
Operating Conditions |
|
|
Ambient temperature |
-5℃ ~ +28℃ |
|
Relative humidity |
≤ 85%RH |
|
Atmospheric pressure |
80kPa ~ 106kPa |
|
Power supply |
380V AC (±10%), three-phase lines + protective earth wire |
|
Grouding Resistance |
≤ 4Ω |
|
Total power |
approx. 100kW |
|
Maximum working current |
approx. 152A |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!