Sinuo Testing Equipment Co. , Limited
| Test Stations | 2 stations |
| Delivery Time | 30 Days |
| Supported Test Combinations | DC+DC, AC+AC, DC+AC, AC+DC |
| Air Source Pressure | 0.6 MPa |
| Supply Ability | 10 Sets Per Month |
| Power Supply | Single-phase AC 220V / 50Hz |
| Control System | PLC + Industrial Computer |
| Packaging Details | Plywood |
| Test Cycle Time | Approx. 30 seconds per sample |
| Payment Terms | T/T |
| Model Number | SNQC-CDQ08H |
| Brand Name | Sinuo |
| Place of Origin | China |
| Certification | Calibration Certificate (Cost Additional) |
View Detail Information
Explore similar products
IEC 61851-23 Cable Anchorage Pull & Torque Test Machine For EV Charging Stations
IEC 62196-1 AC Charging Gun Comprehensive Test System
IEC 62196-1 EV Connector Mechanical Endurance Test Machine With Servo Drive
IEC 62196-2 EV Charging Interface Test Gauges | 16A/32A/63A Test Plugs & Inlets
Product Specification
| Test Stations | 2 stations | Delivery Time | 30 Days |
| Supported Test Combinations | DC+DC, AC+AC, DC+AC, AC+DC | Air Source Pressure | 0.6 MPa |
| Supply Ability | 10 Sets Per Month | Power Supply | Single-phase AC 220V / 50Hz |
| Control System | PLC + Industrial Computer | Packaging Details | Plywood |
| Test Cycle Time | Approx. 30 seconds per sample | Payment Terms | T/T |
| Model Number | SNQC-CDQ08H | Brand Name | Sinuo |
| Place of Origin | China | Certification | Calibration Certificate (Cost Additional) |
| High Light | Dual-Station AC Type 2 charging gun tester ，DC CCS2 charging gun testing system ，EV charging gun comprehensive test equipment | ||
This test system is designed for the functional inspection of AC Type 2 and DC CCS2 charging connector cable assemblies. Each charging connector can be assigned a unique QR code, and all test results are automatically saved into reports for full traceability.
The system performs all required tests automatically in a single cycle, significantly improving efficiency and reducing labor requirements. It is especially suitable for 100% inspection in mass production environments.
• Open circuit, continuity, short circuit, and wire sequence misalignment test for each wire
• Main conductor continuity resistance test
• Built-in resistor test (including both button-pressed and button-released conditions)
• Insulation resistance test between conductors
• Withstand voltage test between conductors
• Thermocouple wire test
| Basic Operating Conditions | |
|---|---|
| Main Power Supply | Single-phase AC 220V/50Hz |
| Air Source Pressure | 0.6 MPa |
| Control System | PLC + Industrial Computer |
| Test Stations | 2 stations |
| Total Interfaces | 2×AC Type 2 sockets + 2×DC CCS2 sockets |
| Supported Test Combinations | DC+DC, AC+AC, DC+AC, AC+DC |
| Single Test Cycle Time | Approx.30 seconds per sample |
| Core Electrical Test Parameters | |
|---|---|
| Open/Short Circuit & Wire Sequence Test | Detected by PLC I/O; automatic pass/fail judgment |
| Main Conductor Continuity Resistance | Test points: L1, L2, L3, N, PE, CP |
| Built-in Resistor Test | Range: 1 ~ 5000Ω; Accuracy: ±1% 16A AC gun: Unpressed=680Ω, Pressed=3.38kΩ 32A AC gun: Unpressed=220Ω, Pressed=3.52kΩ 63A AC gun: Unpressed=100Ω, Pressed=3.4kΩ Overall accuracy: ±1% ~ ±2% |
| Thermistor/Thermocouple Wire Test | Range: 100 ~ 50000Ω; Accuracy: ±2% Upper & lower limit judgment available |
| Insulation Resistance Test | Test objects: Single-phase / Three-phase / DC circuits Test Voltage: DC 100 ~ 1000V (adjustable) Resistance Lower Limit: 1MΩ ~ 1GΩ (adjustable) Accuracy: ±5% Auto alarm when resistance below set value |
| Withstand Voltage Test | Test objects: Single-phase / Three-phase / DC circuits Test Voltage: AC 0~5kV / DC 0~6kV (adjustable) Leakage Current: AC 0.1~20mA; DC 0.01~5mA (adjustable) Accuracy: ±1.5% + 3 digits Programmable voltage control; alarm for over current |
| Plug Insertion & Extraction Force Test | Range: 0 ~ 500N; Resolution: 0.1N; Accuracy: ±1% Data auto-saved to reports |
| Mechanical & Appearance Parameters | |
|---|---|
| Table Height | Approx. 800 mm (Ergonomic design) |
| Overall Dimension (W×D×H) | 1000mm × 800mm × 1800mm |
| Total Weight | Approx. 300 kg |
| Mobile Structure | Equipped with lockable universal casters |
| Fixture | Custom clamping fixtures for charging guns |
| Data Acquisition & Output Functions | |
|---|---|
| Identification Device | 2 sets of barcode scanners; support barcode & QR code scanning Test data bound with codes for full traceability |
| Printing Function | 2 compact printers (one per station) Auto print labels for passed products only (serial No., rating, time, status, etc.) |
| Data Storage | Real-time storage of all test records |
| Data Export Format | TXT/EXCEL |
| MES Connection | Reserved communication interface for MES system docking & data upload |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!