Sinuo Testing Equipment Co. , Limited
| Load Weights | From 100N to 750N |
| Payment Terms | T/T |
| Gauge Accessory | Optional S136 steel standard pin gauge |
| Supply Ability | 10 Sets Per Month |
| Test Cycle | 60s holding time, 4 tests at every 90° horizontal interval |
| Delivery Time | 30 Days |
| Test Items | Latching device test, pull-out force test, mechanical load test |
| Operating Environment | 5–35℃, 30%–90%RH |
| Packaging Details | Plywood |
| Test Station | Single station |
| Model Number | SN1013 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
| Brand Name | Sinuo |
View Detail Information
Explore similar products
IEC 62196 Short-time Test Current And Temperature Rising Test System For EV
AC & DC EV Charging Gun Functionality Tester SNEQ08 | IEC 62196-1
IEC 62196-3 Electric Vehicle Connectors Temperature Rise Test Equipment
IEC 62752 EV Charging Interface Drive Over Testing Machine For Plug Vehicle
Product Specification
| Load Weights | From 100N to 750N | Payment Terms | T/T |
| Gauge Accessory | Optional S136 steel standard pin gauge | Supply Ability | 10 Sets Per Month |
| Test Cycle | 60s holding time, 4 tests at every 90° horizontal interval | Delivery Time | 30 Days |
| Test Items | Latching device test, pull-out force test, mechanical load test | Operating Environment | 5–35℃, 30%–90%RH |
| Packaging Details | Plywood | Test Station | Single station |
| Model Number | SN1013 | Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China | Brand Name | Sinuo |
| High Light | IEC 62196-1 EV charging connector tester ，EV connector mechanical load test apparatus ，EV connector testing equipment with warranty | ||
Test Sample Restriction: Charging connectors
Test Purpose: The charging connector shall be designed for easy insertion and removal of the charging gun, and shall prevent the gun from disengaging from the socket under normal operation. This test verifies whether the maximum force required to pull the charging gun out of the socket complies with specified standard limits.
Test Principle: Maximum pull-out force of socket: Apply the total force combined from standard specified weights (main weights, additional weights, hooks & clamping fixtures) and test plug assembly onto the test plug; the plug shall separate from the socket.
Operating Environment:Operating temperature: 5–35°C; Humidity: 30%–90%RH
| Test Station | Single station |
| Gauge Configuration | Made of S136 steel. The pin gauge is manufactured to the minimum standard dimension with tolerance of +0.01 / 0 mm, center spacing tolerance ±0.05 mm, and surface roughness Ra 0.8 μm. Gauge is an optional accessory. |
| Test Items | 7.11.8: Mechanical load test for charging connectors / Clause 14.1.6 (IEC 62196) 7.15.1.1: Locking device test / Clause 14.1.5 (IEC 62196) 7.17.1 d) e) f): Pull-out force test / Clause 14.1.5 (IEC 62196) |
| Main Technical Parameters of Charging Connector Mechanical Load Tester | |
| Test Setup Diagram | |
| Holding duration | 60 seconds. Realized by hydraulic cylinder driving the tray to lift weights; time controlled manually. |
| Test cycles | 4 times, one test at each 90° interval around the horizontal axis, manual operation. |
| Mechanical Load Weight Configuration |
165N: 1 piece of 148.5N main weight + 1 piece of 16.5N additional weight 300N: 1 piece of 270N main weight + 1 piece of 30N additional weight 440N: 1 piece of 396N main weight + 1 piece of 44N additional weight 660N: 1 piece of 594N main weight + 1 piece of 66N additional weight 750N: 1 piece of 675N main weight + 1 piece of 75N additional weight Note: The weight of main weights includes the hook mass; target load force is achieved by stacking and combining different weights. |
| Main Technical Parameters of Latching Device Test | |
| Test Setup Diagram | |
| Test Holding Time | 60 seconds. Weights are lifted and lowered by a hydraulic cylinder-driven tray; time is manually controlled. |
| Test Load Selection | Refer to Table 7 |
| Test Requirement | The latching device shall be unlocked during testing. |
| Pull-out Force Weight Configuration | AC charging gun: 100N (90N + 10N) DC charging gun: 140N (126N + 14N) |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!