China factories

Chat Now Send Email
China factory - Sinuo Testing Equipment Co. , Limited

Sinuo Testing Equipment Co. , Limited

  • China,Guangzhou ,Guangdong
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &
China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &

  1. China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &
  2. China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &
  3. China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &
  4. China IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &

IEC 60068-2-1 Explosion-Proof Environmental Test Chamber for Temperature &

  1. MOQ: 1
  2. Price: Customized
  3. Get Latest Price
Humidity Range 20%~98%RH
Delivery Time 30 Days
Temperature Fluctuation ±0.5℃
Payment Terms T/T
Temperature Deviation ≤±2.0℃
Temperature Range -70 °C ~+150°C
Packaging Details Plywood Case
Cooling Rate +150℃→-70℃ ≤1℃/min Average No-load
Humidity Fluctuation ≤2.5%
Supply Ability 10 sets per month
Humidity Deviation ≤±3%
Heating Rate -70℃→+150℃ ≤2-3℃/min Average No-load
Model Number SN881-1000L
Brand Name Sinuo
Place of Origin China
Certification Calibration Certificate(Cost Additional)

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Humidity Range 20%~98%RH Delivery Time 30 Days
Temperature Fluctuation ±0.5℃ Payment Terms T/T
Temperature Deviation ≤±2.0℃ Temperature Range -70 °C ~+150°C
Packaging Details Plywood Case Cooling Rate +150℃→-70℃ ≤1℃/min Average No-load
Humidity Fluctuation ≤2.5% Supply Ability 10 sets per month
Humidity Deviation ≤±3% Heating Rate -70℃→+150℃ ≤2-3℃/min Average No-load
Model Number SN881-1000L Brand Name Sinuo
Place of Origin China Certification Calibration Certificate(Cost Additional)
High Light IEC 60068-2-1 explosion-proof test chamber ,temperature humidity environmental test chamber ,electric vehicle testing equipment with warranty

The Explosion-Proof Temperature and Humidity Test Chamber is designed for controlled environmental testing of electronic, electrical, plastic and other industrial products and materials.

It provides a controlled environment for high-temperature, low-temperature, damp heat and cyclic humidity testing, helping manufacturers and testing laboratories evaluate product reliability under simulated environmental conditions encountered during storage, transportation and operation.

With a temperature range of -70°C to +150°C and humidity control from 20% to 98% RH, the chamber provides a wide testing environment for accelerated environmental reliability evaluation.

The chamber incorporates an intelligent PLC and touchscreen control system, dedicated refrigeration and heating systems, forced air circulation and multiple explosion-protection features, making it suitable for demanding laboratory environmental testing applications.


Key Product Highlights

Wide Temperature Testing Range

The chamber supports temperatures from -70°C to +150°C, covering a wide range of cold and heat environmental test conditions.

It can be used for:

  • Low-temperature testing
  • High-temperature testing
  • Thermal cycling
  • Heat exposure testing
  • Cold exposure testing
  • Temperature storage testing

Precise Temperature & Humidity Control

The system provides a humidity range of 20% to 98% RH within its applicable temperature and humidity control conditions.

The integrated control system continuously monitors temperature and humidity and automatically regulates the heating, refrigeration, humidification and dehumidification processes.

This makes the chamber suitable for constant damp heat and cyclic damp heat testing.


Explosion-Proof Safety Design

Unlike a conventional climatic test chamber, this model incorporates dedicated explosion-proof protection features for applications requiring additional safety considerations.

The chamber is equipped with:

  • Explosion-proof pressure relief port
  • Explosion-proof chain
  • Explosion-proof window
  • Safety door locking mechanism
  • Pressure relief protection
  • Dedicated mechanical room
  • Electrical control and protection components

The 300 × 300 mm explosion-proof pressure relief port is designed to automatically open when the internal chamber pressure reaches ≥0.104 MPa, helping release excessive internal pressure.

Important: Explosion-proof performance and applicable hazardous-area requirements should be confirmed according to the customer's test materials, installation environment and required certification before ordering.

 

Technical parameters:

Control & Operation

PLC and touch screen intelligent control system

Chamber Size


Inner Size

External Size

1000*1000*1000 mm

1250*2150*1950 mm

Temperature Range

-70 °C ~+150°C

Humidity Range

20%~98%RH

(Temperature: 20℃~85℃, refer to the temperature and humidity controllable range diagram, no active heat load)

Temperature fluctuation

±0.5℃

Humidity fluctuation

≤2.5%

Temperature deviation

≤±2.0℃

Humidity Deviation

≤±3%

Heating Rate

-70℃→+150℃ ≤2-3℃/min Average No-load

Cooling Rate

+150℃→-70℃ ≤1℃/min Average No-load

Load condition

None

Working noise

A sound level≤70dB(A)

(Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.)

Structural features

Insulation enclosure structure

1. Outer wall material: A3 board spraying.

2. Inner wall material: brushed stainless steel plate SUS﹟304.

3. Chamber thermal insulation material: 100mm high temperature resistant rigid polyurethane foam.

4. Chamber door insulation material: 100mm high temperature resistant rigid polyurethane foam.

Bottom structure strength

The weight capacity of the track at the bottom of the test chamber: ≤100Kg/m² (load)

Air conditioning channel

1. Stainless steel long-axis centrifugal fans: 4 sets/90W.

2. Fan, heater, evaporator (also dehumidifier), drainage device, pressure balance port, adjustable air deflector, temperature sensor

Standard configuration of test chamber

1. Observation window: 400x600x40mm 3-layer vacuum tempered glass

2. Flat embedded handles

3. Door hinges: SUS #304 imported hinges

4. Energy-saving lamp inside the chamber

5. Lead hole: φ100mm 1 piece

Chamber door

1. The single-piece door opens outwards, with the hinge on the left and the handle on the right (when facing the front of the box).

2. Equipped with a safety door locking mechanism (the door can be opened in the test room), the door is equipped with electric heat to prevent condensation, and the visible range of the insulating glass observation window (W400×H600mm). The door frame is equipped with an anti-condensation electric heating device.

Explosion-proof pressure relief port

The equipment is equipped with one explosion-proof pressure relief port on the left side, measuring 300mm × 300mm. When the internal pressure of the chamber is ≥0.104MPa, the pressure relief port will automatically open.

Explosion-proof chain


Explosion-proof window

 


Control panel

Controller 7-inch display screen, temperature (humidity) control display screen, operating indicator light, and lighting button.

Mechanical room

Refrigeration unit, compressor water tray, pressure relief device, heating device

Power distribution cabinet

Distribution board, cooling fan, main power switch, transformer, intermediate relay, time relay, solid-state relay, AC contactor, circuit breaker

Heater

1. Fin-type radiator-shaped stainless steel electric heater

2. Heating control method: SSR (Solid State Relay) non-contact equal period pulse width modulation

3. Heating power: approximately 4KW

Power cable hole

Located on the back of the chamber



Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2019

  • Employee Number:

    <100

  • Ecer Certification:

    Verified Supplier

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...

+ Read More

Get in touch with us

  • Reach Us
  • Sinuo Testing Equipment Co. , Limited
  • Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
  • https://www.evtestequipment.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement