Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Delivery Time | 30 working days |
| Sample Fixture | X/Y/Z 3‑Axis Adjustable Clamp |
| Test Station | Single Station |
| Packaging Details | Plywood Case |
| Flip Function | 90° Automatic Flip(0‑600s) |
| Force Sensor | 50kg,0‑500N Range |
| Supply Ability | 30 Sets/month |
| Test Sample | AC & DC Charging Gun |
| Standard | IEC 62196 |
| Brand Name | Sinuo |
| Certification | Calibration Certificate(Cost Additional) |
| Model Number | SNQC1005 |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 61851-23 Cable Anchorage Pull & Torque Test Machine For EV Charging Stations
IEC 62196-1 AC Charging Gun Comprehensive Test System
IEC 62196-1 EV Connector Mechanical Endurance Test Machine With Servo Drive
IEC 62196-2 EV Charging Interface Test Gauges | 16A/32A/63A Test Plugs & Inlets
Product Specification
| Payment Terms | T/T | Delivery Time | 30 working days |
| Sample Fixture | X/Y/Z 3‑Axis Adjustable Clamp | Test Station | Single Station |
| Packaging Details | Plywood Case | Flip Function | 90° Automatic Flip(0‑600s) |
| Force Sensor | 50kg,0‑500N Range | Supply Ability | 30 Sets/month |
| Test Sample | AC & DC Charging Gun | Standard | IEC 62196 |
| Brand Name | Sinuo | Certification | Calibration Certificate(Cost Additional) |
| Model Number | SNQC1005 | Place of Origin | China |
| High Light | IEC 62196 EV charging gun tester ，EV connector endurance test equipment ，charging plug breaking capacity tester | ||
This EV charging interface plug and pull endurance tester complies with IEC 62196, IEC 60309 series international standards, designed for EV AC/DC charging guns, industrial plugs, sockets and couplers durability performance verification. The equipment adopts servo drive + PLC intelligent control system, simulates repeated insertion & extraction of charging connectors under real working conditions. It can complete normal operation mechanical life test and breaking capacity test with external load. Real-time force monitoring, automatic flipping function, three-axis adjustable fixture support GB, US, EU standard charging interfaces. It can also perform salt-dust-water immersion test per IEC standard, check whether samples can resist mechanical, electrical and thermal stress in continuous operation without excessive wear or damage, evaluate the long-term reliability of electrical accessories.
Main technical parameters
|
Test contents |
a) Breaking and capacity； |
|
Test sample range |
AC and DC charging gun |
|
Test station |
Single station |
|
Electrical control method |
Mitsubishi PLC intelligent integrated control, 7-inch color human-machine touch interface operation |
|
Operation mode |
Manual or program-controlled operation |
|
Function |
It has the function of simulating the normal operation of the charging interface, which can realize the plug-in and pull-out operation of the charging interface, also has the programmable setting of test speed, test time and test times |
|
Drive mode |
The servo motor drives the plugging and unplugging movements and the rotating and liquid-wetting movements, and the auxiliary cylinder realizes the opening and closing of the switch interlocking mechanism. |
|
Sample fixture and clamping method |
Mechanical clamping, X/Y/Z three-dimensional adjustable clamp, adjustable clamping point position, universal clamp suitable for national standard, American standard, European standard AC/DC charging interfaces |
|
Automatic flip |
Equipped with an automatic flipping mechanism at the charging gun clamp, which can be flipped 90º, and the flip holding time can be set arbitrarily within the range (0 ~ 600) s |
|
Number of trials |
0~999999 times, can be preset, automatically stops when the count reaches the set value |
|
Breaking capacity conduction time |
1-999.9s, can be preset (the standard requires that electrical contact should be maintained for no more than 4s and no less than 2s) |
|
Plug and withdrawal rate |
0-10 times/min, can be preset (3.75 cycles/min, 7.5 strokes/min) |
|
Test stroke |
0-150mm, can be preset (the distance between the test plug and the test socket is ≥50mm) |
|
Test speed |
0-1100mm/s can be preset directly on the touch screen |
|
Force value display |
Equipped with a 50kg range force sensor, which can monitor force value in real time, form a force-time curve, display the maximum insertion force and extraction force, and display the current force value, force value range (0 ~ 500) N |
|
Locking device |
It has the function of automatically pressing the mechanical locking device to simulate normal operating conditions. |
|
Solution tank |
Equipped with one solution tank, which can accommodate IEC 62196-1:2022 clause 23.3.2 salt and dust water simulated solution, please note that the solution should be prepared by user |
|
Solution dip requirements |
The numbers of dip, dip time, drying time, plug-in and withdrawal times, and cycle times can be set |
|
Load |
External, can work with SN2217-480V250A |
|
Detection function |
When the load is connected, it can realize circuit break alarm and record the current times. |
|
Safety protection |
Ground protection, short circuit protection, overload protection |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery tes...
Get in touch with us
Leave a Message, we will call you back quickly!