Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 sets/month |
| Delivery Time | 20 days |
| Packaging Details | Plywood Case |
| Inner box size | 1000×1000×1000mm W×D×H |
| External space size | 1600×2400×2000mm W×D×H |
| Equipment weight | 500kg |
| Bearing capacity | 80KG |
| Top slope height | 600mm |
| Total machine power | 15KW |
| Maximum current | 23A |
| Spray pressure | 70～170Kpa |
| Brand Name | Sinuo |
| Model Number | SN8810C-1m³ |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Kb Cyclic Corrosion Test Chamber IEC 60068-2-52 Salt Mist Test Chamber
VW80000 Environmental Test Chamber EV Electric Vehicle Components Tester
Environmental Temperature Humidity Vibration Climate Test Chamber IEC 60068
ISO 1431 Environmental Test Chamber Premium Ozone Aging Oven 400pphm
Product Specification
| Payment Terms | T/T | Supply Ability | 30 sets/month |
| Delivery Time | 20 days | Packaging Details | Plywood Case |
| Inner box size | 1000×1000×1000mm W×D×H | External space size | 1600×2400×2000mm W×D×H |
| Equipment weight | 500kg | Bearing capacity | 80KG |
| Top slope height | 600mm | Total machine power | 15KW |
| Maximum current | 23A | Spray pressure | 70～170Kpa |
| Brand Name | Sinuo | Model Number | SN8810C-1m³ |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 1m3 Compound Salt Spray Test System ，Compound Salt Spray Test System | ||
1m³ Compound Salt Spray Test System Environmental Test Chamber ISO 16750-4
Complied Standards & Clauses
Standard: It can meet the national standard ISO 16750-4: 2006 Road vehicles Environmental conditions and tests for electrical and electronic equipment Part 4: Climatic loads clause 5.5 salt spray test.
Equipment Overview
Corrosion of protected and unprotected metallic materials is influenced by many environmental factors, which mainly depend on the type of metallic material and the type of environment. It is impossible to design a laboratory accelerated corrosion test chamber that includes all environmental factors that affect corrosion resistance. Therefore, the laboratory test is designed by simulating the factors that play a major role in the corrosion of metallic materials. This equipment is designed to simulate and increase the effects of the environment on metallic materials exposed to an outdoor atmosphere that is contaminated with salt and can accelerate corrosion. The equipment includes a test method for cyclically exposing the sample to salt spray, dry, hot and humid environments. This equipment test is a comparative test, and the test results cannot predict the long-term results of the corrosion resistance of the same metal material used under this environmental condition. However, this method can still provide valuable information on the relative performance of materials exposed to salt pollution like the test conditions. Compared with traditional accelerated corrosion tests, such as neutral salt spray test (NSS), acetic acid salt spray test (AASS), and copper accelerated acetic acid salt spray test (CASS), the biggest advantage of this equipment test is that it can better Reproduces corrosion that occurs outdoors in salt-contaminated environments.
Technical Parameters
| Product Name | Compound Salt Spray Test Chamber |
| Product model | SN8810C-1m³ |
| Nominal internal volume | 1m³ Note: Does not include the volume of the top sloping roof |
| Effective size of inner box (mm) | 1000×1000×1000 W×D×H Note: The height of the top slope is 600mm |
| External space (mm) | About 1600×2400×2000 W×D×H |
| Weight | About 500kg |
| Bearing capacity | About 80KG |
| Total machine power | 15KW |
| Maximum current | 23A |
| Power supply conditions and power supply | AC380V three-phase four-wire system + protective grounding; the allowable fluctuation range of voltage is ±10%V. The allowable frequency fluctuation range is 50±0.5HZ; TN-S power supply or TT power supply. The grounding resistance of the protective ground wire is less than 4Ω. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and the switch must independently control the use of the equipment. When placing electrified samples in the chamber box, please use an external power supply for the sample power supply, and do not use the local power supply directly. |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!