Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Effective volume | 4.5m³ |
| Overall power | 8KW |
| Temperature fluctuation | ±0.5℃ |
| Temperature deviation | ±2.0℃ |
| Temperature range | +20℃→+50℃ |
| Humidity range | 20%RH～98%RH |
| Inner chamber size | 1500mm*1500mm*2000mm(W*D*H) |
| Outer chamber size | 1980mm*2420 mm*2450 mm(W*D*H) |
| Brand Name | Sinuo |
| Model Number | SN881C-4.5m³ |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Constant Temperature Humidity walk in environmental test chamber 13m3 less than
IEC60529 IP5/6X EV Charge Station Walk-In Sand & Dust Test Chamber
IEC 60068 Temperature Humidity Walk In Environmental Test Chambers
50m³ Walk In Temperature Humidity Environment Stability Test Chamber
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Effective volume | 4.5m³ | Overall power | 8KW |
| Temperature fluctuation | ±0.5℃ | Temperature deviation | ±2.0℃ |
| Temperature range | +20℃→+50℃ | Humidity range | 20%RH～98%RH |
| Inner chamber size | 1500mm*1500mm*2000mm(W*D*H) | Outer chamber size | 1980mm*2420 mm*2450 mm(W*D*H) |
| Brand Name | Sinuo | Model Number | SN881C-4.5m³ |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Programmable Constant Temperature Humidity Test Chamber ，IEC60068-2-78 Constant Temperature Humidity Test Chamber | ||
IEC60068-2-78 Programmable Constant Temperature & Humidity Test Chamber 4.5m³
Complied Standards & Clauses
It conforms to standards:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Product Overview
This test chamber simulates the temperature and humidity changeable environment for the products or materials. It is widely used in the adaptability test of electrical, electronics, instrument and meter and other product parts under high and low temperature and humid environment during storage, transportation and usage, to determine the temperature adaptability of the above products or materials to high and low temperature and humid environment, especially for product electrification changes in performance and mechanical properties.
Technical Parameters
| No. | Project | Content | |
| A | Product number | SN881C-4.5m³ | |
| B | Product brand | SINUO | |
| C | Chamber inner size | 1500mm*1500mm*2000mm(W*D*H) | |
| External chamber Dimensions | Cabinet part: about 1980mm*2420 mm*2450 mm(W*D*H) | ||
| D | Temperature range | +20℃→+50℃ | |
| Heating rate | ≥2～3℃/min (average over the whole process, no load) | ||
| Cooling rate | ≥0.7～1℃/min (average over the whole process, no load) | ||
| Temperature display resolution | 0.1℃ | ||
| Temperature fluctuation | ±0.5℃ | Data measured under no-load conditions | |
| Temperature deviation | ±2.0℃ | ||
| Humidity range | 20%RH～98%RH | ||
| Humidity fluctuation | ±2.5%RH | ||
| Humidity deviation | ±3.0%R.H | ||
| Temperature and humidity control capability range chart |
(Refer to the temperature and humidity controllable range chart, no moisture source or heat load) | ||
| E | Motor noise | ≤75dB (A) (Measured in a soundproof room with an ambient temperature of 25°C and low echo; A-weighting was used to test the average value of 9 points; each test point was 2 meters horizontally from the noise source and 1 meter high from the ground.) | |
| F | Power Supply | AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%) | |
| G | Power | Overall 8KW | |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!