Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Application force | 5±1N |
| Drive mode | Electric |
| Test Cycle | 0-9999 cycles |
| Test speed | One cycle/s |
| Electrical control method | Button control |
| Sample clamping method | Mechanical clamping |
| Brand Name | Sinuo |
| Model Number | SN1101B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC62196 Electric Vehicle Connector Plug Drive Over Test Equipment 5000N
IEC62196 EV Connector Testing Equipment Plugs Temperature Rise Test System
EV Glow Wire Test Apparatus PLC Control IEC 62196 Glow Wire Test Equipment
IEC 62196 Electric Vehicle Air Saturated Test Chamber 304 Stainless Steel
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Application force | 5±1N | Drive mode | Electric |
| Test Cycle | 0-9999 cycles | Test speed | One cycle/s |
| Electrical control method | Button control | Sample clamping method | Mechanical clamping |
| Brand Name | Sinuo | Model Number | SN1101B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 62196 Abrasion Test Apparatus ，Dual Station Abrasion Test Apparatus ，Label Marking Abrasion Test Apparatus | ||
IEC 62196 Dual station Label Marking Abrasion Test Apparatus
Complied Standards & Clauses
This label marking abrasion test apparatus conforms to IEC 62196-1:2022 clause 8.7, figure 8.
Product Overview
It is utilized to assess the endurance of the marking. The examination is conducted by wiping the marking for 15 seconds with a cotton cloth moistened with water, followed by another 15 seconds with a cotton cloth soaked in 95% n-hexane (Chemical Abstracts Service Registry Number, CAS RN, 110-54-3). After testing with water, the marked surface shall be dried. Rubbing should begin immediately after soaking the cotton piece, applying a pressure force of (5 ± 1) N at an approximate rate of one cycle per second (one cycle consisting of a forward and backward stroke along the marking’s length). For markings exceeding 20 mm in length, rubbing may be restricted to a section of the marking over a path of at least 20 mm. The pressure force is exerted using a test piston wrapped with cotton, which consists of cotton wool enclosed by a layer of medical cotton gauze. The test piston must conform to the dimensions in Figure 8 and should be composed of an elastic material resistant to the test liquids, possessing a Shore-A hardness of 47 ± 5 (such as synthetic rubber).
Technical Parameters
| Test station | 2 stations |
| Electrical control method | Button control |
| Drive mode | Electric |
| Sample clamping method | Mechanical clamping, clamping point position is adjustable |
| Test Cycle | 0-9999 cycles, can be preset |
| Test speed | One cycle/s (a cycle comprising forward and backward movement along the length of the marking) |
| Force | 5±1N,applied by a weight |
| Test piston | NF C 61-314 figure 48,rayon, Shore-A hardness shore A 47± 5 |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!