Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 sets/month |
| Delivery Time | 45 days |
| Packaging Details | Other |
| Nominal internal volume | 1m³ |
| Total machine power | 15KW |
| Bearing capacity | 80KG |
| Maximum current | 23A |
| Heating rate of the test room | RT→+60℃≤45 min |
| Heating rate of saturated tank | RT→+65℃≤45 min |
| Inner box size | 1000×1000×1000mm(W×D×H) |
| External space size | 1600×2400×2000mm(W×D×H) |
| Brand Name | Sinuo |
| Model Number | SN8810C-1m³ |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Kb Cyclic Corrosion Test Chamber IEC 60068-2-52 Salt Mist Test Chamber
VW80000 Environmental Test Chamber EV Electric Vehicle Components Tester
Environmental Temperature Humidity Vibration Climate Test Chamber IEC 60068
ISO 1431 Environmental Test Chamber Premium Ozone Aging Oven 400pphm
Product Specification
| Payment Terms | T/T | Supply Ability | 1 sets/month |
| Delivery Time | 45 days | Packaging Details | Other |
| Nominal internal volume | 1m³ | Total machine power | 15KW |
| Bearing capacity | 80KG | Maximum current | 23A |
| Heating rate of the test room | RT→+60℃≤45 min | Heating rate of saturated tank | RT→+65℃≤45 min |
| Inner box size | 1000×1000×1000mm(W×D×H) | External space size | 1600×2400×2000mm(W×D×H) |
| Brand Name | Sinuo | Model Number | SN8810C-1m³ |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Compound Salt Spray Test System ，ISO 16750-4 Environmental Test Chamber | ||
ISO 16750-4 Environmental Test Chamber Compound Salt Spray Test System
Complied Standards & Clauses
It can meet the national standard ISO 16750-4: 2006 Road vehicles Environmental conditions and tests for electrical and electronic equipment Part 4: Climatic loads clause 5.5 salt spray test.
Equipment Overview
Corrosion of protected and unprotected metallic materials is influenced by many environmental factors, which mainly depend on the type of metallic material and the type of environment. It is impossible to design a laboratory accelerated corrosion test chamber that includes all environmental factors that affect corrosion resistance. Therefore, the laboratory test is designed by simulating the factors that play a major role in the corrosion of metallic materials. This equipment is designed to simulate and increase the effects of the environment on metallic materials exposed to an outdoor atmosphere that is contaminated with salt and can accelerate corrosion. The equipment includes a test method for cyclically exposing the sample to salt spray, dry, hot and humid environments. This equipment test is a comparative test, and the test results cannot predict the long-term results of the corrosion resistance of the same metal material used under this environmental condition. However, this method can still provide valuable information on the relative performance of materials exposed to salt pollution like the test conditions. Compared with traditional accelerated corrosion tests, such as neutral salt spray test (NSS), acetic acid salt spray test (AASS), and copper accelerated acetic acid salt spray test (CASS), the biggest advantage of this equipment test is that it can better Reproduces corrosion that occurs outdoors in salt-contaminated environments.
Technical Parameters
| Product Name | Compound Salt Spray Test Chamber |
| Product model | SN8810C-1m³ |
| Nominal internal volume | 1m³ Note: Does not include the volume of the top sloping roof |
| Effective size of inner box (mm) | 1000×1000×1000 W×D×H Note: The height of the top slope is 600mm |
| External space (mm) | About 1600×2400×2000 W×D×H |
| Weight | About 500kg |
| Bearing capacity | About 80KG |
| Equipment gas source | Equipment gas volume is about 1m3/h. Customers need to prepare water -free and oil -free compressed air with dry filtration on the spot, with an air pressure of 0.4 ～ 0.7 MPa. |
| Environmental conditions | Temperature: 5-30°C, relative humidity 45%～ 85%RH Air pressure: 86kPa ~ 106kPa |
| Installation venue requirements | The ground is flat, the ventilation is good, it does not contain flammable, explosive, corrosive gases and dust, there is no strong electromagnetic radiation source nearby. The ground floor bearing capacity: not less than 600kg/m2. There is appropriate maintenance space around the equipment. A: Not less than 400mm B: Not less than 400mm C: Not less than 1200mm
|
| Power requirements | AC380V three -phase and four -line system+ protection ground; voltage allows the fluctuation range ± 10%V. The frequency allows the fluctuation range of 50 ± 0.5Hz; the TN-S is powered or the TT is powered. The grounding resistance of the protection ground line is less than 4Ω. |
| Water supply | Using tap water supply, water inlet installation and filtering device, water supply pressure: 0.1 ～ 0.4MPa |
| Spray water | The spray water supply is manual water supply, and the pre -prepared salt solution is poured into the salt water supply tank. The spray is automatically supplemented by salt water through the water level difference. Configuring water for salt water needs to meet the requirements of relevant standards. |
| Spray solution | The equipment spray liquid configuration is NaC1, and the configuration solution needs to be prepared properly by calculating at 5%mass. |
| Equipment exhaust | The device exhaust pipeline needs to be extended to the designated location of the outdoor, and the outdoor outside the wall of the device is installed. Following pipes cannot accumulate water, it needs to be kept unobstructed, and the pipe diameter is 60mm. |
| Drainage of equipment | The equipment drainage pipe needs to be extended to the outside and ensure that the drainage pipe is unimpeded. The drainage outlet may be lower than the equipment drainage outlet, and the diameter of the drainage pipe is Ф1/2". |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!