Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 sets/month |
| Delivery Time | 60 days |
| Packaging Details | Plywood case |
| Working area | W1300*700H*D1200mm |
| External size | W1875*1980H*1723 mm |
| Temperature range | -70 °C ~+150°C |
| Temperature fluctuation | ±0.5℃ |
| Humidity fluctuation | ≤2.5% |
| Temperature uniformity | ≤±2.0℃ |
| Cooling Rate | +72℃→-40℃ No-load Linearity Within 30℃/min |
| Heating Rate | -40℃→+72℃ No-load Linearity Within 30℃/min |
| Brand Name | Sinuo |
| Model Number | SN552-1092L |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
EV Lithium Ion Battery Testing Equipment UL 2580 Cell Vibration Testing
1000A EV Battery Testing Equipment UL2580 Cells External Short Circuit Testing
Lithium Ion Cells Thermal Abuse Heating Oven EV Battery Testing Equipment UL2580
IEC 62133 EV Battery Testing Equipment UL2580 RESS 100kN Crush Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets/month |
| Delivery Time | 60 days | Packaging Details | Plywood case |
| Working area | W1300*700H*D1200mm | External size | W1875*1980H*1723 mm |
| Temperature range | -70 °C ~+150°C | Temperature fluctuation | ±0.5℃ |
| Humidity fluctuation | ≤2.5% | Temperature uniformity | ≤±2.0℃ |
| Cooling Rate | +72℃→-40℃ No-load Linearity Within 30℃/min | Heating Rate | -40℃→+72℃ No-load Linearity Within 30℃/min |
| Brand Name | Sinuo | Model Number | SN552-1092L |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 1092L Battery Test Chamber ，1092L Battery Testing Equipment ，EV Battery Testing Equipment | ||
Battery Explosion-proof Test Chamber 1092L EV Battery Testing Equipment
Complied Standards & Clauses
Conforms to IEC60068-2-2:2007, IEC60068-2-1:2007, etc.
Equipment Overview
Environmental conditions:
1. Temperature: 5℃～35℃
2. Relative humidity: ≤85%
3. Air pressure: 86kPa～106kPa
Limitation of specimen:
This test equipment prohibits:
1. Testing or storing samples of flammable, explosive, and volatile substances.
2. Testing or storing samples of corrosive substances.
3. Testing or storing biological samples.
4. Testing or storing samples of strong electromagnetic radiation sources.
Technical Parameters
| Technical Parameters | ||
| Control & Operation | PLC and touch screen intelligent control system | |
| Chamber Size
| Inner Size | External Size |
| W1300*700H*D1200mm | W1875*1980H*1723 mm | |
| Temperature Range | -70 °C ~+150°C | |
| Temperature fluctuation | ±0.5℃ | |
| Humidity fluctuation | ≤2.5% | |
| Temperature uniformity | ≤±2.0℃ | |
| Temperature deviation | ≤±1.0℃ | |
| Heating Rate | -40℃→+72℃ No-load Linearity Within 30℃/min | |
| Cooling Rate | +72℃→-40℃ No-load Linearity Within 30℃/min | |
| Load condition | None | |
| Working noise | A sound level≤70dB(A) (Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.) | |
| Explosion-proof pressure relief vent | A set of explosion-proof pressure relief vents is set on the left side of the equipment, with a size of 300mm×300mm. When the internal pressure of the box is ≥0.104MPa, the pressure relief vent will open automatically
|
| Explosion-proof chain |
|
| Explosion-proof window |
|
| Control panel | Controller 7-inch display screen, temperature (humidity) control display screen, operating indicator light, and lighting button. |
| Mechanical room | Refrigeration unit, compressor water tray, pressure relief device, heating device |
| Power distribution cabinet | Distribution board, cooling fan, main power switch, transformer, intermediate relay, time relay, solid-state relay, AC contactor, circuit breaker |
| Heater | 1. Fin-type radiator-shaped stainless steel electric heater 2. Heating control method: SSR (Solid State Relay) non-contact equal period pulse width modulation 3. Heating power: approximately 3KW |
| Power cable hole | Located on the back of the chamber |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!