Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 1 sets/month |
| Delivery Time | 45 days |
| Packaging Details | Other |
| Test Force Range | 0–50kN |
| Force measurement accurac | 0.001Kg |
| Deformation measurement range | 0.2%—100%FS |
| Speed test range | 0.01-500mm /min |
| Test effective width | 400mm |
| Test stroke | 800mm |
| Load analysis | 1/250000 |
| Load accuracy | ±0.5% |
| Brand Name | Sinuo |
| Model Number | SNB02C-5kN |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
DIN 75220 Electric Vehicle Solar Simulation Test Chamber Halogen Lamp Test
EVSE Slow Fast Charging Electrical Safety Testing Equipment Power Battery REESS
DIN 75220 Electric Vehicle Testing Equipment Spectrum Solar Simulation Radiation
Automotive Car Water Ingress Rain Spray Test Chamber Electric Vehicle Passenger
Product Specification
| Payment Terms | T/T | Supply Ability | 1 sets/month |
| Delivery Time | 45 days | Packaging Details | Other |
| Test Force Range | 0–50kN | Force measurement accurac | 0.001Kg |
| Deformation measurement range | 0.2%—100%FS | Speed test range | 0.01-500mm /min |
| Test effective width | 400mm | Test stroke | 800mm |
| Load analysis | 1/250000 | Load accuracy | ±0.5% |
| Brand Name | Sinuo | Model Number | SNB02C-5kN |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 50kN Electric Vehicle Testing Equipment ，Electric Vehicle Testing Equipment | ||
50kN Tensile Strength Test Machine Electric Vehicle Testing Equipment
Equipment Overview
This computer-controlled testing machine is extensively applied for evaluating the mechanical properties of a wide range of non-metallic and metallic materials, including rubber, plastics, cables, textiles, waterproof fabrics, nonwovens, metal wires, foils, sheets, and rods.
With the support of various specialized grips, it is ideal for performing tensile, compression, peel, shear, tear, and bending (folding) tests on both raw materials and finished products.
The system features high testing accuracy, intuitive operation, and supports multi-data output with graphic comparisons, making data interpretation more efficient and professional.
Thanks to its modular design, the machine offers a wide selection of interchangeable accessories, allowing users to tailor configurations flexibly to match different testing needs.
Whether in quality control, R&D, or material certification, this versatile and reliable testing solution is an essential tool for enhancing testing efficiency and product development speed.
The use of servo drive can better ensure accuracy
1. Accuracy: closed-loop control of position, speed and torque is realized; The problem of stepping motor out of step is overcome.
2. Speed: high speed performance is good, generally rated speed can reach 2000 ~ 3000 RPM;
3. Adaptability: strong anti-overload ability, can withstand three times the rated torque of the load, especially suitable for instantaneous load fluctuations and requirements for fast starting occasions;
4. Stable: low speed operation is stable, low speed operation will not produce a stepping phenomenon similar to the stepper motor. Suitable for occasions with high-speed response requirements;
5. Timeliness: the dynamic corresponding time of motor acceleration and deceleration is short, generally within tens of milliseconds;
6. Comfort: heat and noise are significantly reduced.
Technical Parameters
| Test Force Range | 0-5000kg (0~50kN) |
| Displacement switch | mm, cm, in |
| Displacement measurement displays accuracy | 0.01mm |
| Deformation measuring device | 0.2%—100%FS |
| Test effective width | 400mm |
| Test stroke | 800mm |
| Working power supply | 220V/50HZ |
| Power | 1.0KW |
| Machine size | about 800×500×1500mm |
| Machine weight | about 200KG |
| Load analysis | 1/250000 |
| Load accuracy | ±0.5% |
| Safety device | overload emergency stop device, up and down travel limit device, automatic breakpoint stop function |
| Fixture | One set each of pneumatic, winding, and wedge-type fixtures, customized according to the customer’s product specifications. |
| Operation mode | Computer control, hierarchical mode of operation coupled with detailed help documents and tips make it the most easy-to-use software in the testing machine industry |
Machine weight | about 600KG |
Compression fixture | Width has to be 2 in wide or 50 mm wide flat, horizontal steel plates whose jaws close at the rate of 0.50 +/- 0.05 in/min or 10.0 +/-1 mm/min. |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!