Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Export packing |
| Temperature range | -40~+100℃ |
| Effective volume | 3.38m³ |
| Humidity range | 20%〜98%RH |
| Humidity fluctuation | ±3.0%RH |
| Cooling rate | Average 1℃/min |
| Heating rate | About 3℃/min |
| Inner box dimensions | 1300 mm*1300 mm*2000mm(W*D*H) |
| External dimensions Approx. | 1600 mm*1900 mm*2450 mm(W*D*H) |
| Brand Name | Sinuo |
| Model Number | SN886-3.38m³ |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Constant Temperature Humidity walk in environmental test chamber 13m3 less than
IEC60529 IP5/6X EV Charge Station Walk-In Sand & Dust Test Chamber
IEC 60068 Temperature Humidity Walk In Environmental Test Chambers
50m³ Walk In Temperature Humidity Environment Stability Test Chamber
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Export packing |
| Temperature range | -40~+100℃ | Effective volume | 3.38m³ |
| Humidity range | 20%〜98%RH | Humidity fluctuation | ±3.0%RH |
| Cooling rate | Average 1℃/min | Heating rate | About 3℃/min |
| Inner box dimensions | 1300 mm*1300 mm*2000mm(W*D*H) | External dimensions Approx. | 1600 mm*1900 mm*2450 mm(W*D*H) |
| Brand Name | Sinuo | Model Number | SN886-3.38m³ |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Large Walk In Climate Test Chamber ，Climate Walk In Environmental Test Chamber ，Large Walk In Environmental Test Chamber | ||
Large Walk-in Environmental Test Chamber Walk-in Climate Test Chamber
Complied Standards & Clauses
Applied Standard:
IEC60068-2-1:2007 Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT
IEC60068-2-2:2007 Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT
IEC60068-2-78:2001 Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT
IEC60068-2-22:2005 Environmental Testing Part 2-22: Tests Test N: Change of temperature, IDT
Product Overview
This equipment is suitable for high and low temperature tests on electrical, electronic, mechanical and large parts, semi-finished products, finished products, etc. It can simulate high and low temperature changes to test the quality and reliability of products and parts.
Sample Restrictions:
Technical Parameters
| Workshop dimensions | Width 1300mm × Depth 1300mm × Height 2000mm |
| Outer dimensions | Chamber body is approx. Width 1600mm × Depth 1900mm × Height 2450mm (excluding motor protrusion height) Subject to actual size |
| Door | 1) Double-door hinged door, door opening size 2 meters wide × 2 meters high, two silicone rubber seals and anti-frost electric heating device on the door frame; 2) Door sealing: high and low temperature resistant high-quality sealing strips are used, with good sealing; 3) Condensation elimination: electric heating is pre-buried around the door to prevent condensation at low temperatures; 4) Safety protection: The door can be opened from the inside and outside, the inner box has a safety hammer escape device, and the safety equipment is running an emergency stop switch (with a protective cover) to ensure the personal safety of the operator. |
| Observation window | Two hollow glass observation windows, one on each side of the test chamber door, size: 400×600mm (width×height) |
| Test lead hole | Wiring holes: 2 100mm, 1 on each side of the door opening. The host is on the right, the cabinet is on the left. There is one more wiring hole on the right side of the cabinet. |
| Lighting | The top of the studio is equipped with a high and low temperature explosion-proof lamp to facilitate observation of the sample test status |
| Structural strength | Test box bottom plate load-bearing capacity: ≧100KG (uniform load) |
| Warehouse board inner wall material | SUS304 stainless steel, thickness 1.0mm |
| Warehouse board outer wall material | Colored steel plate |
| Insulation material | Hard polyurethane foam material, thickness 100mm |
| Warehouse base, electric control box and freezer | Using national standard angle iron + 6# channel steel + steel plate spraying |
| Pressure balance port | There is a pressure balance port on the top of the working room: when the pressure in the box is too high, it will be automatically discharged. Rapidly reduce the pressure in the cabin, equipped with a safety shield. |
| Ramp | Equipped with 2 meters long X500MM wide stainless steel patterned plate, bearing 200KG |
Details
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!