GUANGZHOU JIAJUE TRADING CO.,LTD
| Payment Terms | L/C,D/A,D/P,T/T,Western Union, |
| Supply Ability | 1000PCS/MONTH |
| Delivery Time | 1-3 Work days |
| Packaging Details | 1-15300432-1 Fuel Injector 1153004321 for 6BG1T Engine is Packed in standard export packing under customer's requirement |
| Part Number | 460-8213 |
| MOQ | 1 |
| Brand Name | JIAJUE |
| Model Number | 6BG1T |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
359-7434 Diesel Fuel Injector 3597434 For C15 Engine
166-0149 Nozzle For 3176 3196 C10 C12 Engine Diesel Fuel Injector 1660149
Iron 6SD1T ISUZU Diesel Fuel Injectors 1153004151 095000-0760
3126b Dieseal Fuel Injector Assy 10R0782 10R-0782
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union, | Supply Ability | 1000PCS/MONTH |
| Delivery Time | 1-3 Work days | Packaging Details | 1-15300432-1 Fuel Injector 1153004321 for 6BG1T Engine is Packed in standard export packing under customer's requirement |
| Part Number | 460-8213 | MOQ | 1 |
| Brand Name | JIAJUE | Model Number | 6BG1T |
| Place of Origin | CHINA | ||
| High Light | Diesel fuel injector for 6BG1T engine ，1153004321 fuel injector replacement ，6BG1T engine fuel injector part | ||
High-quality fuel injector designed for optimal performance in 6BG1T engines, ensuring precise fuel delivery and reliable operation.
| Product Name | Fuel Injector |
|---|---|
| Part Number | 1-15300432-1 |
| Brand Name | JIAJUE |
| Model | 6BG1T |
| Condition | Brand New |
| Availability | Rich Stock |
| Approximate Weight | 1KG |
| Size (for 1pc) | 20cm x 5cm x 8cm |
| Delivery Methods | DHL FedEx TNT UPS |
| Warranty | 3 months |
| Shipment | Dispatched within 24-48 hours |
Q1: How do I install my 1-15300432-1 fuel injector after purchasing it?
Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains very detailed installation instructions.
Q2: What precautions should I take before installing my fuel injector?
The installation environment must be dust-free; the O-ring must be lubricated with clean machine oil before installation to prevent oil leakage caused by cutting the O-ring during installation; and remember to check that the O-ring is installed correctly.
Q3: Why is my engine still unusable after replacing the fuel injector?
This is common, due to air trapped in the high-pressure oil rail. Please cycle the engine in short bursts (no more than 30 seconds) to purge air. It may take several attempts to stabilize the pressure.
Q4: Is my device compatible with this part number of fuel injectors?
If you're not sure if this fits your machine, please send us your Engine Serial Number (ESN) for free verification.
Q5: How to determine if your fuel injectors need replacing?
Q6: How long will it take to receive my package after I make the payment?
This depends on your country and region, and the customs clearance time in your country. Please feel free to contact us and send us your address and postal code so we can check shipping costs and estimate delivery time for you.
1. Preparation: Clean the injector bores thoroughly. Ensure there is no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for any signs of pitting or erosion.
2. Lubrication: Apply clean engine oil to the three O-rings and the backup rings. Warning: Never use grease. Only use clean engine oil to ensure the seals slide in without tearing.
3. Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.
4. Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft). Note: Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.
5. Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM to ensure precise fuel delivery synchronization.
| Issue | Root Cause | Solution |
|---|---|---|
| Black Smoke | Poor spray atomization or a stuck needle valve can cause dripping. | Inspect the air filter. |
| Hard Start | Internal leakage in the injector can lead to insufficient starting oil pressure. | Inspect the injector O-rings and internal seals. |
| Engine Misfire | A faulty solenoid valve coil or worn internal valve components can cause this. | Inspect the wiring harness connections and replace any damaged injectors. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Trading Company
Year Established:
2014
Total Annual:
5000000-8000000
Employee Number:
15~35
Ecer Certification：
Verified Supplier
GUANGZHOU JIJAUE CONSTRUCTION MACHINERY PARTS specializes in R&D and production of diesel high pressure common rail fuel systems and related components. At present, our main products include single-cylinder (air-cooled and water-cooled) common-rail system products, heavy-duty diesel common-rail ... GUANGZHOU JIJAUE CONSTRUCTION MACHINERY PARTS specializes in R&D and production of diesel high pressure common rail fuel systems and related components. At present, our main products include single-cylinder (air-cooled and water-cooled) common-rail system products, heavy-duty diesel common-rail ...
Get in touch with us
Leave a Message, we will call you back quickly!